Red RC » Wire

November 20, 2015

Reedy charge leads & XH balance board

New from Reedy comes a range of charge leads as well as an XH balance board for 2S to 6S LiPo battery packs. Starting with the wires, first up is a 7-in-1 charge lead that comes pre-wired with six of the most used connector types such as a red BEC, universal-type, Tamiya and T-type plug. Also attached is a dedicated glow-plug adapter and a blank positive and negative wire that allow you to attach a seventh plug of your choice. On the input side 4mm bullet-type connectors are suitable for most of today’s AC and DC chargers. Also new is a T-plug charge lead that can be used both for direct charging or to attach a range of adapters to and last but not least comes the 2-6S XH balance board that can be used with any charger that requires a balance board with XH connectors.

View the other new products here

November 17, 2015

Vampire Racing 2S all-black charging lead

Available now from Vampire Racing is the 2S all-black charging lead in long configuration. The 60cm charging harness comes pre-soldered with 4mm gold-plated bullet-type connectors and an XH balancer on the charger side and and stepped 4/5mm dual plugs and a 2mm balance connector for the battery side which allows to charge 2S LiPo packs with both industry-standard 4mm connector tubes as well as the newer batteries with 5mm tubes.

Source: Vampire Racing [vampire-racing.com]

August 19, 2015

New Xceed gear diff oils & various wires

Xceed have expanded their range of high-viscosity gear differential oils and high-quality wires. Starting with the diff fluids, available now are the extra heavy 500,000cst, 1,000,000cst, 1,500,000cst and 2,000,000cst variants all of which come in handy 50ml containers with large openings and eady-to-read stickers for easy identification. Also new is a range of wires such as 180mm and 200mm soft sensor wires in black, blue and red colour as well as a 150mm saddle pack balancer and charge harness, a 100mm jumper wire pre-soldered with 4mm bullet-type connectors and a black universal plug 180mm servo and ESC wire.

Click here to view more photos

July 28, 2015

Motiv RC Black Out charge harness

Motiv RC’s new Black Out charge harness is all-black to match any colour pit station. It uses the patent pending TQ Wire 4 to 5mm step bullet-type connectors, allowing to charge 4mm or 5mm bullet plug packs with the same lead. The ends are colour coded at the bullet’s using shrink wrap to designate positive and negative polarity. It also boasts 200 degree Celsius wire that allows to charge at higher amps if desired and at 2 feet long it allows to charge out of the way to keep the pit area clean. The harness also features extra length added to the most common XH balance plug which allows to reach the balance port without putting added stress on the wires.

Source: Motiv RC [motivrc.com]

June 16, 2015

Reedy low-profile connectors & 13-gauge silicone wire

Team Associated have introduced the new Reedy 13-gauge Pro silicone wire and low-profile caged bullet-type connectors. Starting with the connectors, they feature a flat top for easy soldering and a versatile caged design that easily adapts to the slight variation in socket sizes found among different battery types and manufacturers. A snug fit and silver plating means less power loss due to resistance while 14mm length makes them a suitable for use with most socket style batteries. The connectors are available in 4mm and 5mm variants and in 2-piece or 10-piece packages. The new 13-gauge Pro silicone wire is a pure copper and pre-tinned variant for easy soldering. A heavy-duty silicone insulation protects the wire from cuts while maintaining maximum flexibility. The special diameter makes it usable for both on-road and off-road applications as it offers the best compromise between resistance and weight. The wire is available in 1m or 30m coils.

Click here to view the other new products

May 8, 2015

Vampire Racing charging leads

Vampire Racing have introduced three new charging leads for different applications. First up is the LiPo saddle pack balancer harness made for all saddle packs with 4mm connector tubes. The conveniently sized harness comes factory-assembled with an industry-standard T-plug connector, XH balancer port and gold-plated 4mm bullet-type connectors. Also new is an universal charging lead with a Futaba/universal-compatible connector. The lead can be used both for receiver and transmitter battery packs, it comes pre-wired with 4mm gold-plated bullet-type connectors and an additional JST/BEC adapter cable. Last but not least is a dedicated charging lead for glow igniters. Using 4mm bullet-type connectors and an industry-standard adapter the lead is ideal to charge most pre-assembled glow igniters.

Click here to view the other new products

April 21, 2015

Trinity 48 pitch pinion gears & 2S charging lead

New from Trinity come 48 pitch pinion gears and a charging lead for 2S LiPo battery packs. Starting with the pinions, the ultra-light and hard anodised aluminium gears are designed mainly for off-road racing and they come in 17T to 45T sizes with the tooth number being etched into the gears for easy identification. Machined to the tightest tolerances the gears run very true and they allow for quicker spool up thanks to a lower rotation mass compared to steel pinions.

Click here to continue reading

March 13, 2015

Muchmore 16AWG super flexible silicone wire

New from Muchmore comes super flexible high current 16AWG wire that comes in handy especially for 1/10th and 1/12th scale classes. The thin diameter and highly flexible silicone insulation will greatly reduce the chance of unwanted chassis and power pod tweaking while still allowing high currents as experienced in modified racing. The black colour wire comes in coils of 100cm.

Source: Muchmore [muchmoreracing.net]