Red RC » Products

September 5, 2017

Ultimate Racing M3S nitro off-road engine

Modelix Racing have introduced the new Ultimate Racing M3S nitro off-road engine. The O.S. made long-stroke power plant was developed to combine high torque with extreme power and a low fuel consumption, something that was achieved by using a redesigned carburettor that sports a new high speed needle holder for optimised mixture flow, better idling stability and increased mileage. Furthermore the new carburettor features a new uniball joint with two mounting screws for easier angle adjustment. Also new is an updated crankshaft with silicone filling and tungsten balancing while the DLC coating improves the lifespan of the crankshaft and crankshaft pin. Part of the new package is also a 3-port liner and piston assembly for smooth, linear yet high power supply and the updated CNC-machined and red anodised backplate made of 7075-T6 aluminium for reduced friction. Thanks to its design the backplate is now also easier to remove. The M3S engine is rounded out by high-quality Japanese-made ceramic bearings and 6.0mm and 6.5mm venturi inserts.

the specifications and another image here

September 5, 2017

Xray X12 US Spec aluminium bushings

Xray have introduced two additional sets of aluminium front suspension bushings for the X12’18 US Spec 1/12th scale pan car. Adding to the standard setting are 0.5mm and 1.0mm specifications that help to either narrow or widen the track width, depending of the orientation. The bushings are machined from high-quality aluminium, they come orange anodised, are marked for easy identification and they come in sets of two.

View the 1.0mm bushings here

September 5, 2017

Fenix Flexy Sexy E4RS4 & updated TC7.1 alloy chassis

Fenix have introduced their Flexy Sexy aluminium chassis for the Team Magic E4RS4 and also an updated main plate for the Team Associated TC7.1. Starting with the Team Magic chassis, it is 85mm wide and weighs in at 82g. Excessive machining in the middle section makes for optimised flex characteristics of the fully symmetrical chassis, making it ideal for all medium to high-bite conditions. As for the updated TC7.1 chassis the main plate now offers ARS mounting positions directly on the chassis. An “ARS” engraving makes for easy identification of the updated item.

View the TC7.1 ARS chassis here

September 4, 2017

RDRP XB4 aluminium caster block sets

Revolution Design Racing Products have introduced their new caster block sets for the Xray XB4 series of 1/10th scale 4WD buggies. An improvement over the original construction the hubs allow to easily adjust the camber link ball stud position and thus camber link length and roll centre by simply adding or removing shims. The multi-piece design was used on rear uprights before and is now available for the front hubs. While offering the standard kit geometry the hubs also allow to run shorter links which can be beneficial in a range of track conditions. The lightweight design and aircraft-grade 7075-T6 aluminium adds only minimal unsprung weight while still being sturdy and durable. RDRP’s C-hubs are usable on all XB4-series buggies and they are available in a 9 degree or 12 degree variant to adjust the corner characteristics of the buggy.

View more images here

September 4, 2017

TMG Speed ride height gauge & slider

TMG Speed have introduced their new ride height gauge and slider. The height gauge is adjustable between 15mm and 20mm but comes with two seats – one 5mm and one 10mm. This allows adjustment from 15mm to 30mm which is ideal for 1/10th and 1/8th applications. Also available now is the TMG slider which fits around the height gauge to easily allow to position the gauge without trying to reach under the car and getting a false height adjustment for the vehicle. The slider will also work well with TMG’s soon to be released 10mm to 15mm height gauge for indoor carpet setups.

View the slider here

September 4, 2017

3DRC 30mm super short Fanbooster for 15mm fans

3DRC have expanded their range of Fanbooster motor fan mounts with the addition of a dedicated 30mm super short variant for extra thick fans such as the one from R1 Wurks. The 3-D-printed duct was specially designed for the use with 15mm thick fans and it is easily mounted using double sided tape. Like all 3DRC parts the Fanbooster is available through the brand’s Shapeways store and in select model shops.

Source: 3DRC [shapeways.com]

September 4, 2017

Arrowmax non-slip pit mat

Coming from Arrowmax is their all-new anti-slip pit mat. Measuring 120x60cm the mat is made from high-quality and very durable rubber material and it comes with a flashy Arrowmax print for a professional look. It can be rolled without unsightly wrinkles being left in the material and it is available now.

View the pit mat in full here

September 4, 2017

VP-Pro stepped throttle/brake servo arms

VP-Pro have introduced their new aluminium stepped-design servo arm for throttle and brake applications. Machined from high-quality aluminium and coming with a black anodised finish and machined silver edge details the servo arm is usable for all nitro car applications that require a stepped arm. The clamping design greatly improves reliability and the servo horn is available for 23T, 24T and 25T spline servos.

Source: VP-Pro [vp-racing.com]