Coming from Target RC and made for the Yokomo BD8 touring car are +1mm zero degree C-hubs for RTC-equipped cars. The hubs are CNC-machined and replace the standard composite hubs with tougher and more precise parts to up the car’s performance especially on bumpy high-grip tracks. While being 1mm wider than stock, the C-hubs also allow to raise or lower the knuckle block in order to adjust the driveshaft angle.
Source: Target RC [targetrc.com]
1up Racing have introduced the Dynamic Toe Control conversion for the Team Associated TC7 and TC7.1 touring cars. This conversion utilises genuine Team Associated parts along with custom 1up Racing C-hubs and inner mounts machined from 7075-T6 aluminium for maximum durability and weight savings. During testing, it became clear that the standard caster block design allowed for too much flex which caused the car to become very unpredictable at times, especially on bumpy surfaces. Due to the unique design of the 1up Racing C-hub, the rear arms now retain far more material and keep their rigidity allowing the DTC system to work well on a wide range of surfaces and track conditions. The DTC conversion does not require any extra drilling or modifications to the existing parts, while also including all the necessary hardware for an easy bolt-on installation.
Coming from Samix and made for the Traxxas TRX-4 trail truck is the high-clearance titanium link set. Machined from high-quality titanium and coming in a natural finish and with etched markings for easy installation, the set makes for improved ground clearance, higher stability and better looks. It is understood that, beside the suspension link kit, Samix will also offer a set that additionally includes the steering and panhard rods.
Coming from Schumacher are a new chassis and updated top decks for the Mi6 and Mi6evo touring cars. The new 2.25mm soft weave chassis will increase the flex of the Mi6-series cars compared to the kit 2.5mm chassis, improving performance especially in lower grip conditions. It will also lower the centre of gravity, improving corner speed.
Following a first series of images and information about their forthcoming EB410 1/10th 4WD buggy, Tekno have now gone a bit more into deep with part two of their introduction series. The latest instalment mainly focusses on the shaft drivetrain that is made up using tapered aluminium centre dogbone-style driveshafts and high-capacity front, centre and rear differentials. Other driveline features include CVA-style front and rear driveshafts with 6mm hardened steel stub axles that run in large inner wheel bearings.
Schumacher have introduced their all-new Cactus 1/10th buggy tyre. The tread has been specially developed for EOS style carpet and offers improved driving feel, faster lap times, and longer life. It has been extensively tested on both new and well worn carpets and the long life design with high density pin pattern and famous stagger edge design will greatly minimise grip roll. The tyre becomes available as 2.2″ rear and 2.2″ 4WD front variant in silver, yellow and blue compound and also as yellow compound pre-mounts. The Cactus was also chosen as the new control tyre for the 2017/18 EOS season and this winter’s Mibosport Cup. Part numbers will be U6839 for 4WD/2WD rear and U6841 for 4WD front while the 2WD class will rely on the proven U6801 (Cut Stagger Low Profile) as the front tyre.
Exotek have introduced a front camber block with integrated anti-roll bar mount for the TLR 22 4.0 and 3.0 series of buggies and trucks. The heavy duty alloy front camber block was designed for the use with TLR sway bars and it is machined down to seven grams to minimise weight but made with 7075 alloy to increase the strength over the stock piece. The part uses set screw holes to remove excess play from the sway bar and it comes polished, anodised black and laser-etched for wear and looks.
3DRC have introduced their all-new Formula Aero Wings suitable for most 1/10th formula pan cars. They mimic the now wider and lower wings used in Formula 1 and they are available with the industry-standard Tamiya-style mounting pattern or as dedicated variant for the Team Associated F6 – the latter requiring the F6’s lower wing mount. Both come with DRS mock-ups for looks and the universal wing also sports a monkey seat for even greater scale appearance. The wings are tough and durable as all of 3DRC’s 3-D-printed parts, however they are not as sturdy as moulded plastic wings and may crack as the result of very hard impacts. As usual the parts are available through 3DRC’s Shapeways store or at select model shops.
