Red RC » Products

April 11, 2017

HB Racing D8 series front arm B mounts

HB Racing have introduced new front arm B mounts for the D8 series of off-road vehicles such as the D817, D817T and E817. The B – or FR – mounts allow racers to fine-tune the front kick-up and roll centre of the vehicle as the suspension hanger controls the location of the rearmost end of the front suspension hinge pins. The mounts are available as +0.0mm, +1.4mm, and +2.8mm variant with the higher numbers equal a smother and easier to drive vehicle when the grip is high. The mounts come machined from aluminium, with a black coated surface and they also fit the D815 and D812 kits.

View the 2.8mm mount here

April 11, 2017

Yokomo Racing Performer 1/10th buggy shock springs

New from Yokomo are the Racing Performer shock springs for 1/10th off-road buggies. Aimed at racing on high-grip tracks such as carpet and astro turf the springs differ from the Yatabe springs by the material used and also manufacturing process, giving a different feels especially on jumps and when the going gets tough. The colour-coded springs become available by mid-April in five different front and three different rear hardnesses.

Source: Yokomo [teamyokomo.com]

April 11, 2017

Capricorn C03 6-bolt 1-piece engine mount

Coming from Capricorn and made for the C03 1/10th on-road car is a new 1-piece engine mount that utilises up to six mounting screws. The new part allows for the use of the traditional four or up to six screws to secure the engine mount to the chassis. The number of bolts used affects the flex in the central area of the car and provides extra security for the long runs. Being milled out of a single piece of 7075 aluminium, the mount also provides extra stiffness and takes torsion away from the engine crankcase for better overall performance and engine life.

View another image here

April 11, 2017

Racing Performer Ultra shock fluids & lubes

Yokomo have introduced their new range of Racing Performer Ultra shock fluids and greases. Starting with the shock absorber oils, the fluids will offer exceptional shock performance in all racing conditions with the range including 25wt to 50wt oils, with the thinner viscosities up to 45wt being available in 2.5wt increments. Also new is the Ultra diff lube that offers a special viscosity to make for smooth performance yet a long lasting diff action. Last but not least is the Ultra thrust/joint grease, formulated for thrust races and all moving metal-to-metal connections such as driveshafts, cross and drive pins as well as many other applications. The lube is high-pressure resistant, will not fling under high centrifugal forces and it is highly heat resistant.

Source: Yokomo [teamyokomo.com]

April 10, 2017

Raw Speed pre-cut 1/10th buggy rear wing

Coming from Raw Speed is a pre-cut rear wing for 1/10th off-road buggies. Made from high-quality Lexan material the wing is laser-cut for high precision and its overall design will make for high rigidity and a long life while providing exceptional downforce. The wing comes pre-cut to the first line of the gurney flap and in sets of two.

Source: Raw Speed [rawspeedrc.com]

April 10, 2017

RDRP XB2 brass rear weight

Revolution Design Racing Products have introduced the XB2 brass rear weight for all Xray XB2 with laydown gearboxes. The weight is made from high-quality brass material and is a direct fit to the vehicle’s gearbox. The weight adds 34g to the rearmost part of the chassis for increased traction in lower grip conditions. The weight comes coated in black and with machined gold-colour edge details to match the remainder of RDRP’s brass option parts.

View another image here

April 10, 2017

VP Pro 1/8th buggy rubber shock boots

Coming from VP Pro are two shock boots sets for 1/8th off-road buggies. Available for the front or the rear the boots attach to the lower parts of the shock body and slip over the shock shaft to prevent them for becoming excessively dirty in dusty, wet or even muddy track conditions. The universal design works with a wide range of brands and the boots come in sets of four for the front or the rear of the buggy.

View the front shock boots here

April 10, 2017

Techra D09 split/1-piece suspension mounts set

Techra’s recently introduced interchangeable split/1-piece suspension mount set is soon also available for the VBC Racing D09 touring car. The kit will include two CNC-machined 7075-T6 aluminium split mounts and also one aluminium and one brass 1-piece connection bride that couples and reinforces the assembly, making it in fact as rigid as a 1-piece mount. The system allows to adapt the chassis twist to various track conditions and thanks to including a lightweight 3.1g alloy and a heavy 9.8g brass bridge, users can also fine-tune the car’s weight distribution. The split mounts were designed to accept the original suspension inserts and the set also includes four red anodised 1mm aluminium shims.

View more images here