Red RC » Products

April 5, 2017

Kyosho V-One R4sII 1/10th nitro kit – Coming soon

Kyosho have released first preview images of their forthcoming V-One R4sII club-level 1/10th nitro on-road kit. The vehicle will sport some subtle revisions such new 2mm shorter shock absorbers whose updated design and 1mm increased diameter still offers increased volume for improved damping characteristics while the updated shock towers lower the overall centre of gravity for increased corner speeds. Also new is a redesigned receiver box that protects the receiver from spilled fuel. The car is meant to make a first official appearance soon and we bring you more information as soon as we get them.

View more images here

April 5, 2017

Sweep Taper Pin & Micro Dot 1/10th buggy tyres

Sweep Racing have introduced their new Taper Pin and Micro Dot 1/10th buggy carpet and astro turf tyres. The tyre’s treads follow well-known and proven designs with a directional design found on the 2WD variants while optimised carcass constructions making the tyres stand out. The range includes the slim 2WD front and wide 4WD Taper Pin as well as the Micro Dot 2WD/4WD rear tyres all of which are available in optimised red medium and blue soft compounds. Also available are light blue sponge inserts for maximised traction.

View more images here

April 5, 2017

JConcepts B6 3-gear laydown honeycomb motor plate

Made for all Team Associated B6 vehicles with 3-gear laydown transmission is JConcepts’ new shielded honeycomb motor plate. The design of the plate makes the part both lightweight and very rigid in multiple directions, resulting in extraordinary toughness while, as a new feature, the motor plate has a built-in spur gear shield to add gear and ultimately body protection during crashes, landings and normal wear and tear. The honeycomb feature adds a 3D look especially as they remain natural aluminium while the rest is available blue or black anodised colours. Slight chamfering on the 3mm thickness material allows the rather beefy plate to look quite slim and trim.

View more images here

April 5, 2017

SWorkz S35-3 series coloured plastic suspension inserts

Coming from SWorkz and made for the S35-3 nitro and S35-3E 1/8th electric buggy are coloured suspension inserts and general plastics parts sets. Available in fluorescent orange or yellow the parts, including suspension mount inserts, caster shims and other miscellaneous items, add a splash of colour while offering toughness or precision.

View another image here

April 4, 2017

Raceform Lazer Jig 1/8th buggy tyre gluing jig

Raceform have introduced the Lazer Jig, a dedicated tyre glueing station for 1/8th buggy tyres. Compact and at 200g very light of weight, the jig features a clincher roller that peels off the tyre bead while automatically aligning the bead after applying the glue and further rotating the tyre. When turned anticlockwise, the roller also presses the tyre towards the rim. The overall design makes for extremely convenient operation while an anti-slip under site allows for a secure stand on the pit table or workbench. The tool is machined from high-quality plexiglas, it takes all standard 1/8th off-road rims and tyres and comes with a 2-piece needle applicator and decal sheet.

View more images here

April 4, 2017

JTP ZX6.6 & RB6.6 titanium ball stud & screw sets

Coming from Jared Tebo’s JTP brand are several titanium screw and ball stud sets for the Kyosho ZX6.6 and RB6.6 buggies. Made in the USA the hardware is machined from billet 6AL/4V titanium with the ZX6.6 screw kit containing 73 fasteners while the RB6.6 specific set includes 58 screws. As for the ball stud sets, each contains 17 ball ends, including one spare ball stud of each size. All sets are available through JTP webstore here.

View the other sets here

April 4, 2017

Flash Point magnetic 17mm wheel wrench & wheel nuts

Flash Point R/C have introduced their new magnetic wheel wrench for 17mm wheel nuts as well as a matching wheel nut set. Starting with the wheel wrench, the lightweight tool has a built in magnet and one end of the wrench’s handle is open and allows to remove the set-screws that hold the pin and wheel hex on the driveshaft. The wrench combined with the new Flash Point wheel nuts makes changing tyres quicker and easier as the chance of loosing a wheel nut during wrenching is greatly reduced. As for the magnetic wheel nuts, the captured and knurled fasteners have a small steel screw and nut that ensure the nut securely rests in the above tool. The wheel nuts are captured to keep dirt out of the axles and are knurled to lock the wheel nuts in place during long main events. The wheel nuts are designed to fit any 1/8th buggy and truck that use a 17mm wheel hex and they are available separately as 4-piece sets or even as a combo set including the magnetic wheel wrench.

View the wheel nut set here

April 4, 2017

Serpent F110 SF3 1/10th formula car kit

Serpent have introduced the latest incarnation of their successful F110 platform, the SF3. The car is based on a new, black anodised 2.5mm aluminium main chassis plate that sports carbon fibre extensions for the electronics such as receiver and speed controller. The battery is placed in a longitudinal position that, in combination with the slightly backwards mounted electronics, makes for an agile handling and a responsive car. Up front the previous 2-part lower wishbones have been replaced by a single carbon fibre plate. Included with the kit comes with realistic front and rear wings that have been updated by using a more flexible yet stronger composite material. The kit, that does not include body, tyres, gears and electronics, will hit stores very soon.

View the features and more images here