Exotek have introduced new carbon fibre and aluminium option parts for the Xray XB2 2WD buggy. First up is a 2.5mm carbon fibre bottom plate fitting both the carpet and dirt spec kits. Quasi weave construction insures proper stiffness while the lightweight material makes this chassis weigh in at only 84 grams, 42 grams lighter than stock. The bottom plate is a direct replacement for the stock part.
SRP Quality Products have introduced their new 6000mAh 100C Stock Spec LiPo battery pack. Specially developed for stock racing classes the 2S hardcase battery utilises 100C high-performance cells with a low internal resistance and a flat discharge curve for maximum power over the whole run. The pack weighs in at 295g, it makes use of standard 4mm connectors and comes including a pre-wired balancer wire with XH balancer and Deans-type power connectors.
Source: SRP [srpqualityproducts.com]
Coming soon from KO Propo is the Servo Model Selector, a device that allows to store up to five different model pre-set memories in compatible servos. The model selector is usable with RSx, RSx2 and BSx2 servos and it requires the use of KO Propo’s ICS Servo Manager software for an initial setup of the values with the actual pre-sets being easily accessible by just using the Servo Model Selector.
Coming from Xray and made for the NT1 1/10th 200mm nitro on-road car is a rear graphite chassis stiffener. Designed to eliminate flex around the engine area the brace comes in handy especially on high-bite tracks as it couples the radio plate mount and the 2-speed bulkhead, resulting in a reinforced rear chassis section. Included with the stiffener comes suitable mounting hardware.
Source: Xray [teamxray.com]
Brilliant RC have introduced their new C-18 R 1/8th scale on-road bodyshell. Available in a standard non-cut but also pre-cut variants for vehicles such as the Shepherd Velox V8, Mugen MRX-6, Serpent 977, Xray RX8 and ARC R8.0, the body is manufactured in Germany from finest 0.75mm polycarbonate with well distributed material thickness making for best durability and performance. The body’s shape ensures a very good overall traction in combination with a lot of steering, resulting in a super smooth but fast handling. Coming with window masking sheet and decals, the EFRA homologated body (#31545) will also be legal for the Pro Stock Series and it is available very soon.
T-Works have introduced their new tyre additive bottle with heavy duty applicator. The sponge applicator will withstand even highly aggressive traction sauces such as the Mighty Gripper V3 with the 50ml bottles being ideal to mix own additives or to control the amount of sauce taken with you during travelling. Included with the bottle comes a range of coloured dots to allow for easy marking.
Coming soon from Trinity is the 24K Certified Plus stock racing brushless motor. Based on the standard 24K the Certified Plus went through specific checks to ensure maximum performance. First up the motor’s rotor asymmetry is being checked which is meant to be a crucial part in building a fast motor. Typically a rotor shows asymmetry values of 0 to 30 plus with Trinity’s Certified Plus motors not exceeding a 4. On top of this each motor comes with red-sealed ceramic bearings and pre-set timing specially dedicated for 2-cell off-road, 2-cell on-road touring or 1-cell 1/12th scale applications. The Certified Plus range of motors will include 13.5T and 17.5T variants, they come with dyno printouts and are available soon.
Source: Trinity [teamtrinity.com]
Coming from Fast Race and made for Mugen’s MBX7R buggy are coloured battery boxes. Constructed from ABS material the compartments easily take straight-type LiPo receiver battery packs while an incorporated channel makes for easy wire routing towards the receiver box. The battery box comes in fluorescent yellow or red as well as plain black colour with two screws allowing for easy battery access through the detachable lid.
