Red RC » Products

July 30, 2015

Team Associated Apex Lexus RC F BL LiPo combo

Team Associated’s Apex Lexus RC F Brushless ready-to-run car is coming soon in the LiPo combo package including the 423-S 35W compact balance charger and the Wolfpack 3300mAh LiPo battery. The car comes fully assembled and with factory-installed Reedy brushless power. Additional features include the XP water-resistant speed control and XP 2.4GHz radio system. The front and rear sealed metal gear differentials are connected together with a tough aluminium drive shaft and imperfections in the road are managed by four adjustable fluid-filled, coil-over tuned shocks. The high-grip, treaded racing tyres are mounted on scale replica Lexus RC F 20-spoke hex-drive wheels featuring detailed brake rotors and callipers. Topping it all off is the factory-finished Lexus RC F body that replicates every detail of the most powerful of Lexus production cars.

Click here to view the features and more photos

July 29, 2015

Schumacher Cougar KF2 mid motor conversion

New from Schumacher comes the mid motor conversion for the Cougar KF2 2WD buggy. The conversion moves the motor cluster back by 19mm and puts the LiPo battery in front of the motor. The included carbon fibre chassis accepts all motor positions, standard, low grip and mid as well as all LiPo layouts. The shift gives the KF2 more rear traction and allows the power to be transmitted easier into forward bite and acceleration. This means that racing on low and medium traction conditions such as dirt and sandy/dusty astro just got easier. The chassis accepts normal height shorty LiPos, to maximise traction on very low grip conditions a low profile battery could be used. The body requires a small modification to clear the spur and side gear cover and a modified body is readily available.

Source: Schumacher [racing-cars.com]

July 29, 2015

Shepherd Velox V8 aluminium middle shaft

Shepherd have introduced another option part for the Velox V8 1/8th on-road car in the form of an aluminium shaft for the use on the middle bearing block. Compared to the standard shaft the aluminium part saves about 65 percent of weight, resulting in improved acceleration. The shaft comes hard-coated for wear and is available now.

Source: Shepherd [team-shepherd.com]

July 29, 2015

NT1 graphite radio plate flex brace

Coming from Xray and made for the NT1 car is the graphite radio plate flex brace. The part is cut from 2.5mm carbon fibre and designed to stiffen the front end of the car which can help to calm down the car in high-bite conditions.

Source: Xray [teamxray.com]

July 29, 2015

Brandon March triples at Indoor Electric Champs

The 1st annual North American Indoor Championships were held at Sparks Park in Columbus, Ohio and the event brought in approximately 160 entries across the ten classes that were offered. In Modified 2WD Buggy, Brandon Marsh took the TQ and in the A-main he was able to lead from start to finish to take the win while Brandon Weiland and Eric Clark came in second and third respectively, making for a Team Associated podium lock-out.

Continue reading the report here

July 29, 2015

Yokomo YZ-2 graphite front suspension parts

New from Yokomo come graphite suspension parts for the YZ-2 1/10th 2WD buggy. Available are front suspension arms in flat and gullwing specification, C-hubs as well as steering blocks all of which are made in a harder graphite-reinforced composite that was developed with this year’s IFMAR World Championships at the Japanese Yatabe Arena in mind. As for the different design front arms the flat type was developed to offer maximum stability while the gullwing arm gives more steering.

Click here to view the other new parts

July 29, 2015

Yokomo 2WD drift car aluminium steering knuckle set

Made for Yokomo’s Drift Package cars with RWD option is the new aluminium steering knuckle set. The knuckles feature five different upper camber link positions and four different steering Ackermann points to allows for a wide range of steering scrub, trail, kingpin angle and Ackermann adjustments including positive and negative Ackermann settings. Included in the set are the left and right steering blocks, 1050 bearings and new wheel axles.

Click here to view another photo

July 28, 2015

T-Works D812 & Cobra lower shock mount pins

T-Works have new lower shock mount pins for the HB D812 and Serpent Cobra buggies available. Cut from titanium the parts offer a low weight and a high rigidity and the D812 pins also act as anti-roll bar mounts. The shafts come in sets of four pieces.

Source: T-Works [rc-tworks.com]