Made for Xray’s latest X10’15 and X12’14/15 cars are these eccentric aluminium inserts for the front lower A-arms. Available as standard, +/-0.5mm and +/-1.0mm variant, the bushings come in pairs and allow to increase or decrease the front track width in order to fine tune the handling of the chassis while adding a bit of durability at the same time.
Source: Xray [teamxray.com]
Muchmore introduce a tailor-fit carrying bag for the new Cell Master Double Accel charger. The zipped and padded bag not only securely stores the charger but also a Power Master World Edition 2 Evo power supply, all needed harnesses and a standard LiPo charging bag, thanks to build-in dividers. An inner pocket takes the manuals while interchangeable cushions protect your precious charging hardware.
Source: Muchmore [muchmoreracing.net]
Following the STC-4 190mm touring car bodyshell Sweep will soon have another TC body available. The teaser image of the forthcoming STC-6 shows a different hood design with two additional ridges that span from the grille section toward the wind screen. The grille itself also is of a slightly different design while additional ridged above the lower louvers give a hint on an updated aero package compared to the STC-4. We bring you more information about the body as soon as we get them.
Source: Sweep [sweepracing.com]
Arrowmax introduce a spring steel turnbuckle set for Xray’s XB4 line of 1/10th off-road buggies. Included are six 51mm and one 44mm long spring steel tie-rod as well as a suitable wrench, also made from high quality steel. The turnbuckles as well as the wrench come laser-etched for easy identification.
Source: Arrowmax [arrowmax-rc.com]
Available now from Team Associated are two brass bulkheads for the B5 and B5M buggy. The bulkheads increase the weight configuration possibilities, adding weight to the front for more steering, or providing chassis balancing. The direct-replacement front bulkheads, which are sold separately, come in standard 25 degrees and 30 degrees of kick-up with the latter increasing corner-entry steering.
Click here to view the 30 degree bulkhead
Yeah Racing introduce this aluminium motor plate for the Axial SCX10 and AX10 crawlers. Machined from high-quality aluminium and coming blue anodised the part is stronger yet lighter than standard cast or billet aluminium parts while the machined cooling fins help to dissipate heat from the motor.
Click here to view another photo
Avid introduce these black colour wing mount buttons for 1/10th on-road and off-road vehicles. They were designed after Avid’s successful 8th off-road wing button, they feature a countersunk screw hole and the same contact surface as the 8th buttons for an improved fitment of the wing and less deformation, resulting in increased rear traction at high speeds. The buttons come as pair, they are CNC-machined from aluminium and laser-etched with the Avid “A” and are usable on most touring cars and off-road vehicles that use M3 screws to fasten the wing.
Source: Avid [avidrc.com]
Xray introduce two new main gears for the XB4 line of buggies. The 78T and 75T gears complement the already existing range of (larger) gears to help with gearing for stock racing classes where smaller main gears are needed to achieve a proper gearing. The gears moulded from a high quality composite material for best possible durability while being light of weight at the same time. Moulded-in size markings help with identification even when the gears are installed in the chassis.
Source: Xray [teamxray.com]
