Red RC » Products

May 9, 2014

Tamiya TB Evo.6 & TB-04 Pro II

Tamiya Japan released first images of their forthcoming TB Evo.6 and TB-04 Pro II shaft-driven 4WD touring car kits. Seen as renderings some time ago, the TB Evo.6 marks the latest evolution step of the company’s competition TB Evolution line of chassis. Based on a 2.25mm carbon fibre chassis and coming with a 2mm upper deck, the kit features a transversally mounted motor to overcome the negative “torque steering” effects of a longitudinally mounted motor. Other features include low-profile aluminium shock absorbers, aluminium shock tower brackets, a floating servo mount and suspension components taken over from the TRF418 kit. The TB Evo.6 is set for a release around end of June.

Click here to continue reading

May 9, 2014

SkyRC nitro engine heater

SkyRC now have a nitro engine heater available. Fitting all .19 to .26 nitro engines, the heater is powered by a 12VDC power source such as respective battery packs or a power supply and it pre-heats the engine to 60°C to 70°C within 10 minutes. Pre-heating a nitro engine will result in less “pinch”, the engine is easier to start and both the engine and glow plug will wear less compared to a “cold” start. Made from tough fabric an upper access port allows to insert a glow plug igniter or thermometer. Included with the heater comes a XT60 DC adapter wire.

Source: SkyRC [skyrc.com]

May 9, 2014

Exotek SRX2 Ti front axles & alloy shock posts

Exotek have new option parts for the Serpent SRX2 buggy available in form of titanium front axles and aluminium shock posts. First up are the Flite-series titanium front wheel axles. They are almost as strong as steel shafts but weight in at only 4.3g while the stock steel axles weight 7.6g a pair. Using the lighter shafts reduces unsprung weight as well as rotational mass resulting in quicker direction changes. Also new are the front and rear 12mm shock absorber posts. Coming in pairs the parts are machined from high-quality aluminium, they are orange anodised and offer a thicker mid section for added durability.

Click here to view the other new parts

May 9, 2014

PSM B5 series shock standoff set

German company PSM introduce a new optional part for the Team Associated B5 line of buggies in the form of aluminium shock standoffs. Machined from 7075-T6 aluminium and coming in a shiny silver finish, the parts are designed to replace the stock standoffs with a more durable, lightweight and cooler looking alternative. Included in the set are four standoffs and four optional spacers for the use with PSM’s V1 or V2 carbon fibre shock towers.

Source: PSM [psm-rc.com]

May 9, 2014

Pro-Line Electron VTR 2.4″ buggy rear tyre – Preview

Pro-Line Electron VTR 2.4" buggy rear tyre – Preview

Pro-Line soon have the Electron VTR 2.4″ 1/10th buggy rear tyre available. Coming in PL’s M4 super soft and MC clay compound, the tyre sports a mesh-type tread with supporting dots and a specially designed carcass. The indoor and outdoor clay track tyre fits Pro-Line’s new VTR range of wheels and will become available very soon.

Source: Pro-Line [prolineracing.com]

May 8, 2014

F.V.S.S. Ghost bodyshell stiffeners

F.V.S.S. introduce their new Ghost bodyshell stiffeners. Made from carbon fibre rods and steel eyelets, the stiffeners prevent the body from becoming deformed in the event of a crash or under heavy load but still allow a certain amount of flex increasing the steering response of the car. Each set includes 6 body stiffeners and 12 specially designed clips for easy and convenient mounting to the body.

Click here to view a photo of the parts in place

May 8, 2014

Sanwa M12 40th Anniversary edition radio

To celebrate their 40th Anniversary, Japanese manufacturer Sanwa introduce a special edition of the M12 top-of-the-foodchain radio system. Coming in a special piano lacquer design, with an engraved serial number plate and new offset steering wheel, the radio highly differs from the standard M12. It is understood that the set will include a total of three receivers including a RX-471, RX-472 and a RX-471 Dual-ID-Ver. Also included is a transmitter battery pack and a suitable charger.

Source: Sanwa [sanwa-denshi.co.jp]

May 8, 2014

TRR RaceStuff BD7 & TRF418 aluminium chassis plates

TRR RaceStuff have new aluminium main chassis for the Yokomo BD7 and Tamiya TRF418 available. Both are CNC-machined from high-quality 2.0mm aluminium, they are of a symmetrical design and come with a natural finish without any anodizing. The BD7 chassis is a TRR first while the CDE2.1 for the TRF418 is an updated version of the already existing CDE2.0 with the new version sporting a highly machined design to scrub around 25g of weight.

Click here to view the Tamiya chassis