Red RC » Products

March 20, 2014

Yeah Racing 60mm Shock-Gear dampers

Yeah Racing introduce a 60mm shock absorber set based on their Shock-Gear oil-filled 50mm and 55mm dampers. They are designed to fit many 1/10th rally cars and feature threaded aluminium shock bodies, blue anodised aluminium upper caps, lower caps and spring pre-load nuts, they come with a full array of shock springs and a set of standard and conical hole pistons to adjust compression and rebound characteristics. Other features include titanium-nitride coated shock shafts, anti-leak O-rings and different volume compensator options.

Source: Yeah Racing [yeahracing.com]

March 20, 2014

Muchmore Fleta ZX 13.5T fixed timing brushless motor

Muchmore’s Fleta ZX 13.5T Type-W brushless motor is now also available in a fixed timing version. The hand-out motor of the 2013/14 ETS Pro Stock class builds on the same design as the conventional stock motors but comes with a fixed timing endbell making it ideal for zero timing club races, regional and national championships alike.

Source: Muchmore [muchmoreracing.net]

March 20, 2014

Exotek B5M battery strap & FlexFit cap

New from Exotek Racing comes the ‘Flite’ carbon battery strap for the Team Associated B5M buggy and a Navy FlexFit hat. Starting with the battery retainer, the part is cut from high-quality carbon fibre, it weights in at only 6g and replaces the stock composite strap with a more rigid part. The direct replacement strap is useable with stock and aftermarket thumbscrews. Also new is the adult-size FlexFit hat with embroidered Exotek team logo to show your passion to everything Exotek. The cap is available in S/M and L/LX sizes.

Click here to view more photos

March 20, 2014

Kyosho 69 teeth 48 pitch spur gear

Kyosho America introduce a 69 teeth 48 pitch spur gear for the use in stock and spec brushless classes. The smallest spur gear to fit the current 1/10th slipper clutch allows the lower ratios typical for this type of racing and it is made from high-quality composite material for low weight, high strength and low running noise.

Source: Kyosho [kyoshoamerica.com]

March 19, 2014

Reds Racing 2014 R5 engine range

RedsR5TTeamEdition-3

Reds Racing have new R5 buggy engines available in the form of the R5T Team Edition and the R5 Racer. The 2014 versions both feature a new front ball bearing with improved sealing and better durability, a redesigned crankcase with wider fins close to the exhaust makes for better cooling and the power plants also come with a new combustion camber insert and cooling head. The R5T Team Edition is hand-tuned by Mario Rossi and comes with a silicone-filled, balanced and tuned crankshaft, rear ceramic bearing, RDC hard-coated backplate, 5-port sleeve with exhaust port booster and a long needle carburettor. Before leaving the factory the engine is hand inspected and compression checked for maximized performance.

Click here to continue reading

March 19, 2014

Speed Power E801B 1/8 electric buggy

Speed Power introduce the E801B 1/8th scale electric off-road ARTR buggy kit. The vehicle builds on a tough aluminium chassis with 3-differential shaft drivetrain, it features aluminium suspension mounts with moulded inserts for easy setup adjustments and it comes with aluminium shock towers and spring steel CVD driveshafts. Included are also hardened steel main, crown and spur gears, big bore shock absorbers with rubber boots, a carbon fibre differential and steering support plate as well as a clear polycarbonate bodyshell. The buggy comes factory assembled and without the needed RC components, speedo, motor and batteries.

Click here to view more photos

March 19, 2014

MCD Racing camber & ride height gauges

MCD Racing have new setup tool for large scale cars available in the form of a camber and ride height gauge. The camber gauge allows measuring the wheel’s camber angles in a -10 to +10 degree range while the ride height tool measures in a 20mm to 70mm range. An extended arm allows to virtually measure on all parts of the chassis for improved usability and precision. The tools are made from high-impact plastic and work with 1/5 and 1/6 scale cars, buggies and trucks.

Click here to view the ride height gauge

March 18, 2014

RB One, XB8 & MBX7 airfilter foam sets

RB have two new nitro airfilter foam sets for the RB One as well as the MBX7 and the XB8 available. The foam pieces offer improved airflow and a high degree of filtration to maximise performance and airflow. Included are 12 inner and 12 outer foams per set.

Source: RB [rbproducts.com]