Red RC » Products

October 3, 2013

MIP SCTE Pro4mance front linkage set

Following the release of the new camber link sets for the TLR’s SCTE 4WD short course truck MIP introduce corresponding steering links. Just like the camber links the steering linkage set makes use of highly durable Dubro rod ends and genuine Lunsford titanium turnbuckles. The parts make for a lowered weight and higher precision resulting in quicker and more precise steering response. Included in the set is suitable hardware in the form of screws, conical washers and aluminium nuts.

Source: MIP [miponline.com]

October 3, 2013

CRC Gen-X 10 SE & Xti Altered Ego kit

Calandra Racing Concepts introduce two new car kits in the form of the Gen-X 10 Slider Edition and the Xti Altered Ego full car kit. Designed for the World GT class the proven Gen-X 10 received a make over to become lighter, narrower and more adjustable. The Slider Edition or SE in short now features CRC’s Slider rear pod plates for steeples, easy ride height adjustment. The chassis offers multiple battery positions using locators and sports additional slots for custom placement of 1S packs. Included with the kit comes CRC’s Encore shock and the Pro-Strut front suspension and all carbon fibre parts are now also made using a new quadaxial, high-modulus material for added toughness and rigidity..

Click here to continue reading

October 3, 2013

Protoform G6-T oval race body

This season saw the Cup Series introduce their highly-anticipated new generation of body styles. With increased brand identity, a stylish new look and ultra-competitive racing, interest in the Cup series is once again on the up-swing with fans, manufacturers and media. It’s only natural that Protoform would bring this exciting look to 1:10 scale oval racing. The all-new Protoform G6-T race body reflects all the details of the real racers while adapting it for the ultra-high downforce demands of today’s carpet oval race cars. The G6-T features ample wedge built right into the body, but can also be adjusted with different trimming angles for stock classes. Trimming slightly under the trim line also makes the body ideal for cap tire racing. The G6-T is produced with the best in quality .030 polycarbonate. It’s equipped with spoiler mounting hardware, protective film, window masks and a decal sheet and will also fit most popular 200mm sedan chassis.

View more images of the G6-T here

October 2, 2013

MIP SCTE hard springs & lightweight camber rods

MIP introduce new option parts for the TLR SCTE short course truck as well as MIP Pro4mance converted trucks in the form of a 3-pair spring kit and lightweight camber links. Starting with the spring set, it includes three spring pairs of higher spring rates as the standard springs for a wider range of tuning options. The colour-coded springs fit both the SCTE 1.0 and 2.0 and are also available separately. Also new are the Pro4 Lite camber links. The turnbuckle set makes use of durable Dubro rod ends and genuine Lunsford titanium turnbuckles to make for both light and strong camber rods. The parts are a direct replacement the stock camber rods, scrub around an ounce of weight and improve the handling and control of the truck. Included are four front and rear turnbuckles, eight rod ends as well as mounting hardware.

Click here to view the camber rod set

October 2, 2013

CSO One Super-V flex chassis conversion kit

CSO introduce the Super-V flex chassis conversion kit for the CSO One touring car kit. The set includes a new flexible chassis plate with large milled-out sections to improve roll flex during cornering. Along with the updated chassis comes a corresponding upper deck, again with machined sections to increase flexibility. Included with the set comes a new middle layshaft mount that separates the mount from the top deck, as well as aluminium centre pulleys, new steering posts, a middle reinforcement post, new suspension mounts with added mounting points for the inner split blocks, as well as a new motor mount for a wider range of pinion gear choices. The set is rounded out by a fan mount for 35mm and 40mm units. It is understood that the set also fits the Xray T4 (2013 Spec) touring car.

Click here to view more photos

October 2, 2013

MIP Traxxas Race Duty CVD drive shafts

Now MIP’s Race Duty CVD drive shafts are offered in both steel or aluminium for many Traxxas vehicles. The new Steel line is comprised of aircraft grade steel bone for higher output machines, along with a strong steel X-Duty axle. The aluminium line makes use of light weight hard-anodised aircraft grade 7075 aluminium bones for less rotating mass, along with the steel X-Duty axle. The fusion axle is strictly designed for two-cell LiPo batteries with both versions of the drive shafts offer a maximum of durability and added rigidity over the stock parts. The CVDs are available for Slash, Nitro Rustler, Nitro Stampede, VXL and 4×4 trucks.

Source: MIP [miponline.com]

October 2, 2013

Xray T4 2014 electric touring car kit

Xray introduce the T4 2014 electric touring car kit. Still called the T4 platform the 2014 spec kit features a range of new and updated parts that heavily separates the ’14 version from the previous kit. First up is the 89mm wide 2.2mm carbon fibre chassis that comes with pre-drilled holes for optional parts such as chassis weights, motor guard, battery holder or battery straps. Also part of the newly designed chassis is an updated motor and layshaft mount – both separate parts now to eliminate unwanted tweak. The layshafts mounts are of a captured design to allow the layshaft bearings to stay in place even with the top deck screws removed. The chassis flex is now additionally adjustable using a sturdy aluminium post that can be screwed onto the motor mount.

Click here to continue reading

October 2, 2013

RT black aluminium servo arms

New from Reckward Tuning come single and dual arm servo horns for the use with many 1/8th off-road and on-road vehicles. They are made from high-quality aluminium, come black anodised and they sport two and four holes for the steering and throttle/brake linkages respectively. The clamp-type design makes for a secure fitment even when the going gets tough and the arms are available as 23T, 24T and 25T servo spline variant.

Click here to view more photos