Red RC » Products

September 16, 2013

Sweep Silicone high viscosity ball differential grease

Sweep introduce their new silicone grease for ball differentials. It is of thicker viscosity than standard diff grease making it stick to the pressure plates longer increasing their lifespan and that of the diff balls. The grease is also good for the use on thrust bearings as well as sealed bearings and is recommended for any heavy-duty application where high pressures or loads are occur. The grease works in a large temperature range of -30°C up to 200°C and has a good resistance to moisture and water.

Source: Sweep [sweepracing.com]

September 14, 2013

Xray XB9E 12T pinion gear

Xray have added to their line of high-performance pinion gears for the XB9E with the release of this 12T version. Manufactured from special steel for toughness and durability, precise tolerances assure unparalleled concentricity. Precision-cut teeth with chamfered edges the pinion comes with the M4x4 set screw.

Source: Xray [teamxray.com]

September 13, 2013

JConcepts Nissan Armada SC body

New from JConcepts comes the radically looking Nissan Armada short course truck body. The exterior of the Armada is built to cater to racer demands. Aggressive, high-impact headlight and grille treatment has an unmistakable straight-on look. Included in the front hood design are reverse louvers which are built-in to allow two air-escape passages. The famous Nissan fender treatment has an additional raised section which allows plenty of front tire clearance under load. The raised section is double purpose and also functions as an additional air escape feature while the low-profile roof line helps maintain a low centre of gravity allowing the SUV to transition the turns like a JConcepts heritage truck design. Two, rear, easy to trim, Hi-Flow cut-outs chiseled between the SUV rear windows along with upper access for ream-able hole cut-outs complete a polished air release package. The body comes with decal sheet and window masks and is a direct fit on Slash, SC10, XXX-SCT, SCT-E and SCT 410 trucks with others may fit with additional trimming.

Click here to view more photos

September 13, 2013

Team Associated low-friction ball cups

Team Associated have new low-friction ball cups available for all cars that use the company’s standard #7230 ball cups. The redesigned cups help to free-up the front and rear suspension to let it work more efficiently. Included in the set are 12 rod ends.

Source: Team Associated [rc10.com]

September 13, 2013

Exotek F1 & Pan Car heatsink

Exotek introduce this heatsink for the use with pan and F1 cars. The special design allows the air to flow through the large fin section while the back of the heatsink gives enough clearance for high axle F1 or low axle 1/12th cars. The low-profile design also gives adequate body clearance and vented openings allow ‘open can’ motors to breath. The heatsink is machined from 6061 aluminium, comes in blue or black colour and simply clips onto the motor with no fasteners needed.

Click here to view more photos

September 13, 2013

Yokomo B-Max2MR Ver.2 announced

After introducing the updated B-Max4 III a couple of days ago Yokomo now announce the soon release of the new B-Max2 Ver.2 2WD buggy. Included in the kit will be some of the option parts Yokomo have to offer for their 2WD platform as there is the recently introduces aluminium chassis with composite side pods, aluminium idler gears for the transmission and steel diff gear internal. The chassis will greatly improve handling especially on medium to high grip surfaces while the idler and internal diff gears make for better durability and also a more efficient drivetrain. The buggy that can be built in mid or rear motor configuration will hit the stores from End of September.

Click here to view more photos

September 12, 2013

Pro-Line Pro-2 2wd SC kit

Pro-Line have announced the release of their Pro-2 SC kit combing their highest quality and best performing SC accessories into one box to create the ultimate Short Course Truck. The Pro-2 SC Performance Chassis is 3mm thick Hard Anodized 7075-T6 aluminium and extends the full length of the truck for maximum durability and keeps everything in-line and extremely low for optimum performance. The Performance Transmission has been a popular upgrade for many other vehicles and has now found a permanent home in the Pro-2 SC. The oil-filled, tunable differential coupled with the steel top shaft, idler gear and internal diff gears offer durability and proven performance.

View more details & images here

September 12, 2013

Tamiya Egress 2013 4WD buggy kit

Tamiya America today released first information on the Egress 2013 4WD electric off-road buggy. The re-release of the 1989 buggy builds on a long wheelbase Avante-type carbon fibre chassis and includes newly designed parts such as ball differentials, universal driveshafts and fibre-reinforced parts in order to make the buggy ‘2013-ready’ in terms of durability and overall rigidity. Included with the kit comes a full ball bearing set, a clear polycarbonate body shell with Egress sticker sheet and black lightweight rims with pin tyres. There is no official release date yet but according to Tamiya America the item is ‘coming soon’.

Source: Tamiya [tamiyausa.com]