Red RC » Products

July 5, 2013

ZZRacing announce more titanium screw sets

ZZRacingTitaniumScrews

ZZRacing expand their range of titanium screw sets for some of the latest on-road and off-road cars available. The screws are light of weight, hard, strong and significantly reduce the change of stripping the hex head due to the material used. For the moment ZZRacing adds sets for the ARC R10’2013, KM HK-1, VBC WildFire, VBC FF Twelve, VBC Flash04, Spec-R R1 and S1, Tamiya F104, Schumacher Mi5, TLR 22SCT and 22T, AE SC104x4 and Yokomo YRF001W.

Source: ZZRacing [zzracing.net]

July 5, 2013

Kyosho Mini-Z, Scorpion XXL & RB6 option parts

Kyosho Mini-Z, Scorpion & RB6 option parts

Kyosho Germany announce the release of several new option parts for the Mini-Z line of cars and buggies, the Scorpion XXL and the RB6 buggy. Starting with the Mini-Z parts, new is the Audi R8 LMS body set for the AWD line of cars. The limited edition item comes chrome plated and is specially made to celebrate Kyosho’s 50th anniversary. It fits all Mini-Z AWD cars. Made for the Mini-Z MB-010 buggies is an anti-roll bar set. Designed for the use on the front and the rear of the vehicle the option part reduces the chassis roll on high grip surfaces in order to improve corner speed and handling. Included are three pairs of front and rear anti-roll bars and mounting hardware.

Click here to continue reading

July 5, 2013

Diggity Designs DC4 conversion kit

The Diggity Designs DC4 conversion kit for Team Associated’s ‘near vintage’ TC4 optimises the use of LiPo batteries and brushless motors by relocating and centralising the battery and electronics closely to the centreline. A new suspension geometry via redesigned shock towers and a lower centre of gravity helps to improve traction and handling as does the tweak free floating servo mount. Narrower and thinner chassis and top plate provides maximum traction on low traction conditions as well as maintaining stability under high traction conditions. The kit targets VTA and USGT racers with the car also being useable in today’s sedan mod and stock classes. Hard and soft chassis and top plates are available as tuning options. The kits is limited to 50 pieces with labelled chassis and kit boxes.

Click here to view more photos

July 4, 2013

SRC 1/8th on-road option parts

Sprint RC from Italy introduce new option parts for the Serpent S977 and several other nitro on-road cars. First up is the C08 gear box set for the S977 that allows the use of smaller 0.8 module gears from Serpent 1/10th kits. Included in the set, that also moves the engine 1.5mm further back, is a new middle layshaft, gear and one-way housings, a 3-bearing clutch housing, clutch shoes and 17/22T pinions. The set is rounded out by updated engines mounts and will make for better acceleration and bottom to mid-range response. Also new are carbon fibre quick change levers for the front and rear axles. They are made from 4mm carbon material and weight only 3g in total, minimising vibrations and improving tyre wear over conventional metal levers. Last but not least come 20 micron hard coated drive shafts. They offer a super low weight and best possible durability and are usable on virtually every 1/8th on-road car.

Click here to view the other new parts

July 4, 2013

SkyRC Cheetah 60A motor & ESC combo

SkyRC introduce the Cheetah 60A sensored brushless motor and speed controller combo set. Based around a 60A speedo the set targets cost oriented 1/10th and 1/12th scale stock racers. The controller is useable with 2S to 3S LiPo batter packs, offers a 6V/3A BEC system, optional fan unit, direct solder tabs, an integrated on/off switch and easy programming via the included programming card that allows the adjustment of parameters such as cut-off voltage, brake and punch settings. Part of the set is also a rebuildable sensored brushless motor with 12.5mm rotor, vented can design and pre-soldered connector tubes. The combo set is available with your choice of a 8.5T or 10.5T to 21.5T stock motor.

Click here to view more photos

July 4, 2013

Yeah Racing touring car body gauge

Yeah Racing now have this 1/10th touring car body gauge available. The part is designed to check body height, rear body height, wing overhang and wing chord/end plates to make sure the body complies with ISTC and BRCA regulations. Made from aluminium the foldable gauge comes in blue or gun metal colour with white markings.

Click here to view another photo

July 4, 2013

S-Workz S104 4WD EK1 4WD buggy kit

At this year’s Nuremberg International Toyfair S-Workz, already known for their 1/8th electric and nitro off-road buggies, showed a prototype of their first ever 1/10th electric 4WD car and now the vehicle nears its public release. The S104 EK1 is based on a very narrow aluminium chassis and sports some very interesting design features such as a front pivot ball suspension, ‘1/8th-ish’ wheel axles with large diameter wheel hex adapters and wheel nuts as well as a forward-biased weight distribution with a rear battery mount for 2S LiPo saddle and 98mm shorty packs. The shock towers are cut from silver-colour carbon fibre with the rear item being of a split design with a lower aluminium camber link brace for added rigidity. Mounted to the damper stays are big bore aluminium oil-filled shock absorbers with mud deflectors to protect the shock shafts and seals. Included with the kit comes an aggressively shaped cab forward body shell with add-on polycarbonate dirt shields for the main chassis plate. It is understood that the kit will hit the stores by the end of August.

Click here to view more images

July 4, 2013

Much More RB6 Wonder body & Fashion wing

Much More RB6 Wonder body & Fashion wing-1

Much More introduce the Wonder body shell and Fashion wing for the Kyosho RB6 2WD buggy. The body sports a distinctive mid-cap design with reduced projection area for less aerodynamic drag, improved straight line speed and a more balanced low/high speed handling. A shark fin around the rear roof section improves straight line stability and jumping. The body is useable for mid and rear motor buggies and comes with a suitable Fashion called wing which is also available separately.

Click here to view more photos