Red RC » Products

June 4, 2013

JConcepts SC10B Hazard wheels & Rips front tire

JConcepts have introduced the Hazard 12mm hex wheel for the front of the SC10B. A powerful new look that combines the winning combination of a 10 spoke design, bead-lock appearance and center lug nut detail with a hint of inspiration from yesteryear. The Hazard will make an immediate impact on the performance of the SC10B by widening the stance by 6mm in overall width bringing it up to the SCT ROAR maximum legal limits in dimensional width. By nature, Short Course vehicles have a high center of gravity and tend to feel light or tippy in high-speed sections so there is no better way to improve on-track stability than to add width, and with the Hazard wheels, sweeping through the high-speed corners gets a little easier. Also new for the SC10B the Rips front tire has optimized a 5 rib front tire design by altering the rib depth, attack angle and multiple radius corners to give 2wd SCB racers a smooth new option. Tiny ribbing has been added on the upper sidewall to provide a fresh edge during hard and high impact corners.

Click here to view the Rips front tire

June 4, 2013

Xray XCA 15T 1st gear pinion

Xray introduce this high-strength 15T 1st gear pinion for the RX8 car. It is made from 7075-T6 aluminium and machined on special gear machines for the ultimate in precision and true running. A fine internal threading allows easy installation on XCA clutch bells and each pinion is etched with the tooth number for easy identification. The new 15T variant rounds up the already existing range of pinions with a smaller version.

Source: Xray [teamxray.com]

June 4, 2013

Yaiba Racing TLR 22 alloy C-hubs & steering rail

Yaiba Racing soon release two new option parts for the Team Losi Racing 22 platform in the form of front aluminium C-hubs and an aluminium steering rail. The C-hubs improve the rigidity and durability of the front end and come with 5° of build-in caster. Included in the set are 2mm shims to allow for easy wheelbase changes. Also new is an aluminium steering rail that is designed to replace the kit’s plastic part. The rail features updated inner steering link positions to improve the Ackermann geometry over the standard part. Both the C-hubs and the steering link are available very soon.

Click here to view the steering rail

June 4, 2013

Serpent S100 & S120 power pod parts

Serpent introduce new option parts for the S100 and S120 pan cars in the form of updated rear bearing blocks and a carbon fibre X-brace. The motor pod parts are CNC-machined from 7075-T6 aluminium, they come grey anodised and increase the stiffness of the car’s rear end when combined with the carbon fibre X-brace. The parts fit all earlier models of the S120 and S100, and are included in the S120-LTX and S100-LT kits.

Click here to view the other new parts

June 4, 2013

NVision 3S 3200mAh & 2500mAh LiPo packs

New from nVision come two LiPo battery packs in the form of a 3S 3200mAh pack and a 2500mAh receiver battery. Starting with the 3200mAh 11.1V 3S pack, the power source comes in a protective hardcase and is build from 45C high-performance cells. It comes pre-wired with a Deans-style connector and is ideal for 1/10th Traxxas trucks, many off-road vehicles and also run 1/8th buggies on 6S configuration. The second new battery is a 2500mAh receiver pack in 2S2P configuration. Sporting dimensions of 53x30x30mm the pack weights 100g and comes pre-wired with a JR-compatible universal connector.

Click here to view the other new battery

June 4, 2013

Yuki Model Digital Battery Capacity Checker

CN Development & Media introduce the Yuki Model Digital Battery Capacity Checker for 2S to 7S LiPo battery packs. The device can make use of EH and XH balancer plug equipped packs and measures and displays the pack’s overall voltage, single cell voltage, highest and lowest voltage cell and the remaining pack capacity.

Source: CN Group [cn-group.de]

June 4, 2013

LRP VTEC G32 pre-mounted TC tyres

LRP introduce their new VTEC G32 asphalt touring car tyre. It marks the next evolution step of the X30 and comes mounted on a redesigned rim that is made from a new shock-resistant material for vibration free and true running. Available in sets of four the pre-glued wheels include LRP’s white insert and are the handout tyres for the 2013 German championships and the outdoor season of the LRP-HPI-Challenge.

Source: LRP [lrp.cc]

June 4, 2013

Vision Racing SCTE 2.0 carbon fibre options

Vision Racing introduce three new option parts for TLR’s Ten-SCTE 2.0 4WD short course truck in the form of a centre diff brace and two different length steering drag links. All parts are cut from 2.5mm quasi-isotropic carbon fibre and while the diff brace makes for a stiffer and more rigid centre of the chassis the steering links are used to adjust the Ackermann angle of the front tyres in order to fine-tune steering characteristics.

Click here to view the other new parts