Red RC » Products

February 14, 2013

Racers Edge Twin400 charger

The Racers Edge Twin400 is a dual output 200-watt per channel DC only multi chemistry balance charger. Featuring a compact footprint that allows you to stack the batteries you are charging in a secure c-channel battery rack, a bright LED backlit LCD screen that is at an inclined angle for easy charge monitoring, independent USB charge port and a sleek aluminium carrying case that adds extra protection from the elements. Racers Edge Prime Chargers are capable of handling all of your charging needs while offering features you can’t find anywhere else. A full aluminium case with heat sink and built in cooling fans keep temperatures in check while the amps are flowing. Built in balance software, a complete lineup of adapters, along with their unique Pro Bullet Harness, takes care of everything in your stable. There’s even a blank lead for your own customization. The Twin400 is capable at charging at 10amps at 200watts per channel. Discharge current is 2 x 25watts up to 5amps. 1-6cell lipo and 1-15cell NiCd/NiMH.

View more details & images here

February 14, 2013

AKA 1/8th medium inserts

AKA have updated their medium insert with the addition of fluting on the inside, just like the world championship winning soft “Red” insert. This makes the medium insert slightly softer than the original, yet still yields the same characteristics needed in a firmer foam. Fitment for all 1:8 buggy tires and standard AKA short course tires.

Source: AKA [raceaka.com]

February 14, 2013

JConcepts 1/8th truck Black Jackets & Stackers tires

JConcepts have released their Black Jackets and Stackers threads for 1/8th scale truck. The Black Jackets, constructed from very small square pins, provide additional grip on loose conditions with a light amount of dust and debris across the surface. The tread spacing near the outside rows are slightly open allowing maximum flexibility to adhere to smooth and slick surfaces providing a reasonable flex contact patch. The Stacker reveals a heavy center lug design which are supported at the lower base with extra rib features and tiny fillets which provide a heavy forward gripping force. Directional slashes cut into the tread soften the lugs to absorb bumps and also increase the lug flexibility to accommodate loose conditions. The outer rows are a medium to hefty size lug with alternating positioning to drive forward and side-bite while the Stacked rows actively react with one another to lower the overall wear of the tire. The side-lugs are finished off with a hard angle to ease the transition from forward to side-bite while maintaining a linear feel without edginess in the turns.

View the Stackers truck tires here

February 13, 2013

Avid standoffs & bushings for Associated big bores

Avid have released stronger new standoffs with a replaceable Delrin pivot bushing to coincide with the release of the new 12mm Team Associated big-bore shocks. Avid aluminium shock standoffs are made of black anodized 7075 aluminium and have a wide base to prevent bent shock mount screws from de-railing your bid for TQ. The pivot bushings can be replaced to help keep a tight fit and not wear out your aluminum shock caps. Fits the latest generation B4.2, B44.2, T4.2, SC10, SC10B and past generation cars like B4.1, B44.1, T4.1, etc. and they come in 4 Lengths, short, standard, standard +0.030 and standard +0.090.

Source: Avid [avidrc.com]

February 12, 2013

JConcepts MBX7 Silencer body shell

New from JConcepts comes the Silencer body shell for the Mugen MBX7 buggy. Intended especially for high speed tracks such as the one found at the 2012 IFMAR World Championship in Buenos Aires, the body was designed from the ground up and features a narrowed, Finisher stance cockpit for better fuel tank access, a smoother high-speed transition and increased flow around the engine heat-sink. A deep recess around the heat-sink area with dual channeling out the rear provides air escape along with rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires. The extended runner features are placed on the rear-end of the body enhancing the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over the pipe, fuel tank and electrical/linkage make up the main pods. The body comes clear, including window masks and decal sheet.

Click here to view more photos

February 12, 2013

ProTek Supreme Power 100C LiPo batteries

A Main Hobbies introduce the ProTek Supreme Power 100C LiPo battery packs. Build from the latest high-performance cells and coming in several specifications including 1S and 2S pan car spec packs, two standard 2S and one ‘shorty’ pack as well as a saddle pack for split type chassis configurations. Also new are three 4S LiPo packs for 1/8th scale classes. Capacities range from 5800mAh with the 1S pack over 3000mAh to 7000mAh 2S and 3500mAh to 6700mA 4S packs.

Source: A Main Hobbies [amainhobbies.com]

February 12, 2013

Sprint RC Lola 2013 1/8th body

Sprint RC introduce the new 1/8th Lola 2013 body shell. The EFRA-homologated (#31534) body features a new reinforced front area design, reinforced super stiff side pods and an innovative rear end with very tall side dams. Made from high-quality lexan material the Lola 2013 also sports a super low and narrow cockpit section for better airflow around the engine head.

Source: SRC [sprintrc.it]

February 12, 2013

Panaracer 64dp pinion gears

Panaracer introduce specially designed 64dp pinion gears for the use in electric touring car models. They are CNC-machined from the best possible materials, are a perfect match for the Panaracer spur gears and are available in a range of 22T up to 50T.

Source: Panaracer