Red RC » Products

November 21, 2012

Yaiba Racing B4 option parts

Yaiba Racing is a new Japanese brand aimed at releasing new products for competition RC cars, on and off road. Their products have been designed and tested by their experienced design-engineer and produced in Japan. The first products are for the Associated B4 and include a new machined motor plate with heatsink. Made from 3mm thick 7075 aluminium, the special heatsink design allows for more heat dissipation and weight reduction. Next up is the battery plate thumb nuts, also made from aluminium, and a complete set of 12mm clamping hex wheel hubs which stay in place when removing your wheels. Finally there is a big bore shock mount kit for the B4, SC10/T4 and B44 that allow you to attach the 12mm big bore shocks to the current range of off-road cars of Team Associated.

View the other new parts here

November 20, 2012

Motonica P81 RS3 1/8th chassis

Motonica have announced the release of their new P81 version RS3. The main new improvements include the new chassis plate, new rear shock absorber body and front shock absorbers shafts and a new servo saver Ackerman plate. The new chassis aims to increase grip and add more steering while the new shock absorbers body is longer, resulting in more traction and more steering of the car, while the new Ackerman helps offer smoother driving and more steering.

View more images here

November 20, 2012

LRP 4500mAh 40C/80C 11.1V pack

A new VTEC Competition Car Line 3S battery is ready, the 4500mAh 40C/80C 11.1V. It features higher C-rate for more power and higher capacity for longer run times. This is achieved through the use of even better, thinner and more efficient cells. The latest materials and an optimised electrolyte make the high-end battery ready for the use in 1/10 onroad and offroad cars.

Source: LRP [lrp.cc]

November 20, 2012

Elangears Elan-R compact charger

Elangears have released the follow up to their EL-01D compact charger with the release of the Elan-R. The updated device sports a clearer orange LCD screen and more power. Powered by DC 11V – 16V it now has a charging output of 0.1 to 15A and a discharge current of 0.1 to 7A making it a significant update on the previous version.

View another image of the Elan-R here

November 20, 2012

Team Orion Vortex R10 Stock

Racers were asking for a stock version of Team Orion’s successful Vortex R10 Pro speed controller and the Vortex R10 Stock is the result. Now you can squeeze the extra power out of your stock racing motors, while keeping total control with the awesome throttle and brake feeling of their US National winning ESC software. The R10 Stock has been factory programmed with the 0° timing software, which is optimized to give the best possible performance when using 0° timing.

Source: Team Orion [teamorion.com]

November 19, 2012

Team Titan Blitz R18-V2 shell

The Blitz R18-V2 is based on the Blitz R18 which was announced in 2011. The V2 version features lower front to provide more steering, a lower rear side give better top speed and quick response when changing direction and they have stiffened the surface to make the body structure stronger. There is 3 different thicknesses ranging from 1.2mm for the best durability, 1.0mm for the best balance of performance and durability and a 0.8mm version for the best performance. They expect the shell to be homologated for the 2013 season.

Source: Team Titan [team-titan.com.tw]

November 17, 2012

Hitec H4 DC/DC multicharger

Hitec announce their new H4 four port DC multicharger. Housed in a sleek aluminium case with backlit graphic display and four computer controlled 120W ports the charge can make use of NiMH, LiXX and Pb batteries. The 8A independent ports can also be paired into two 240W outputs for even more charging power. The charger sports the usual line of safety features, is upgradable with the latest firmware and PC-interface capable using Hitec’s own HPP-22 PC interface.

Source: Hitec [hitecrcd.com]

November 17, 2012

S-ePower Electrical Switch

The S-ePower Electrical Switch is an electronic on/off switch with build-in LiPo battery low-voltage cut off to protect receiver batteries from damage. It features an integrated battery indicator, large power switch and dimensions of 39.2×17.5×9.5mm and weights 11g. The switch is useable in a voltage range of 5V to 10V and is able to handle a peak current of 14A. Designed by Japanese company KO Propo it is a direct for the S-Workz S350 PSP radio tray and also fits many other vehicles.

Source: S-Workz [sworkz.com]