Red RC » Products

August 25, 2012

HPI Plazma 6500mAh 95C LiPo & safe case

The HPI Plazma range of battery packs is growing with the release of this new pack. Fitting within all accepted maximum pack sizes, allowing it to fit in any competition touring car, buggy, short course truck and other types of racing car, the 95C power rating will give you plenty of acceleration while the 6500mAh rating will allow you to fully utilise the power of the pack throughout a 5-minute race. It also features a real Dean’s connector and a universal balancing plug for simple maintenance. For charging your LiPo batteries with complete confidence there is the new HPI Plazma Pouch LiPo safe case. The case is flameproof and provides superior protection for your pit area and home from overcharged or damaged batteries.

View the LiPo safe case here

August 24, 2012

Durango DEST210 Race Ready RTR

The DEST210 Race Ready RTR from Team Durango is an out-of-the box racing Stadium Truck. After months of development and testing, they are proud to bring you their Race Ready RTR 2WD off-road Stadium Truck. Complete with Electronic Speed Controller (ESC) and 13.5 brushless motor from World Champions ‘Speed Passion’, Team Durango’s RTR DEST210 is ready to race, and win, from the moment you take it out of the box. Team Durango Race Ready RTR trucks are an ideal introduction into the amazing and exciting hobby of RC car racing.

View more images here

August 24, 2012

µ-Pro Photon optional servo mount set

A new product from µ-Pro is this optional servo mount set for the T.O.P. Racing Photon EX. This optional servo mount set would secure the servo only at the center line of the main chassis. This would optimize the left-right balance of the the chassis flex characteristics. The set comes complete with all the additional parts and fasteners to mount your servo.

View the complete se thee

August 24, 2012

T-Work’s HN & OFNA X3 Sabre options

Some new parts from T-Work’s for the HongNor & OFNA X3 Sabre. First up is a quick change engine mount option for the car, a complete set which includes all the required fasteners and shims needed to mount it. Secondly is a 3.5mm steering ackerman plate set. There are 3 different types A, B & C, with type A short, type C long and B the same length as the original. Also type C gives a different turning effect. The plates themselves are CNC machined from 7075-T6 aluminium and are 0.5mm thicker as well as harder than the original.

View the ackerman plate set here

August 23, 2012

Schumacher SupaStox GT12 differential

The new Schumacher SupaStox has taken the GT12 class by storm with these small cost effective racers a big hit around the indoor circuits. Now they are glad to bring you an item that Schumacher were first made famous for 30 plus years ago, a diff. The Schumacher engineers have once again come up with a superbly designed item made from high quality components which will allow many many runs without a rebuild. Strong solid steel axle combined with an alloy hub/wheel carrier, steel short axle and precision ball bearings allows simple tightness adjustment without the need to disturb the tension when removing the wheel.

Source: Schumacher [racing-cars.com]

August 23, 2012

KM H-K1 alu middle plate mount set

For the H-K1 EvoII from KM Racing is this aluminium middle plate mount set. Suitable to be mounted with carbon or copper middle plate, the supplied copper plate will move the centre of gravity more to the bottom and to the centre. The new parts are suitable for H-K1 EvoII chassis only.

Source: KM [km-rc.com]

August 23, 2012

Xray hard coated aluminium wheel nut

Xray have released this hard coated aluminium wheel nut for their range of 1/8th offroad vehicles. Ribbed for secure tightening on the axle they are sold as a pair.

Source: Xray [teamxray.com]

August 23, 2012

HPI/HB Hauler Bag

This HPI/HB Hauler Bag is roomy enough for a 1/8 scale buggy or touring/drift car and all required accessories, it’s sturdy enough to withstand the rigors of international travel. Using high-impact, corrugated black plastic sheets to form the interior of the HPI/HB Hauler Bag means that it’s light and maneuverable, so it’s easy to get where you need to be. The bag features inline skate-type wheels and an extending carry handle so it’s easy to transport through crowded airports or even just across the parking lot and into your favorite RC track. Tough carry handles at each end and a long shoulder strap give you more carrying options. The zippered top shelf has loop-style tool holders or can easily fit a tool organizer. The selection of side pockets includes a huge side pocket that can hold an extra-large setup board, an end pocket for instruction manuals or magazines, and two pockets on the opposite end that can hold cleaning spray cans and diff or shock oils. The main body of the HPI/HB Hauler Bag features a full-side zippered opening that rolls up and is secured with hook-and-loop fasteners to stay out of the way of the 5 corrugated plastic drawers.

View more images of the bag here