Red RC » Products

January 23, 2012

Nosram Pure 2 modified brushless motor

Nosram introduce the Pure 2 modified brushless motor. Newly designed from scratch the BL motor features a CNC-machined 7075-T6 aluminium can with cooling cut-outs to keep the running temperature low, comes with a 12.5mm sintered rotor and oversized ball bearings. Nosram’s PreciSensor system allows for easy timing adjustments using inserts and the motor will be available as 4.5T, 6.5T and 8.5T variant first with 4.0T, 5.0T and up to 10.5T versions to follow.

Source: Nosram [nosram.com]

January 20, 2012

STRC Traxxas 2WD green anodised aluminium parts

ST Racing Concepts introduce the green anodised aluminium parts series for the Traxxas 2WD Short Course truck. These parts will certainly be a hit for those wanting to hop-up their favourite energy drink theme short course truck or add some durability and great looks to their machine. Available are steering knuckles, front caster blocks, rear hub carriers, steering bellcranks, front bulkhead, shock caps, front and rear skid plate as well as lock-pin hex adapters. Most of the parts fit the Traxxas Monster Jam replicas also.

Source: STRC [teamstrc.com]

January 20, 2012

Buku Speed Tune clutch

The Buku Speed Tune clutch is the world’s first and only clutch for nitro RC vehicles that lets you independently tune the spring tension for each shoe without removing the motor or clutch bell. There is no need any more for pulling out the engine, breaking down your clutch, and picking a spring for each shoe. Each clutch shoe is equipped with a special Aramid fibre pad that is extremely wear resistant and that causes virtually no wear to the clutch bell. The extremely low wear rate and uniform friction characteristics of the Komposite fibre pads with no wear to the clutch bell create a very consistent and reliably performing clutch.

Source: Buku [bukupower.com]

January 20, 2012

Dynamite Passport UltraForce 200W charger

Dynamite’s Passport UltraForce produces up to 200W of charge power with AC/DC input voltage and an array of features that certain to catch the eye of even the most avid of RC enthusiasts. The UltraForce pumps out up to 10 amps of continuous current and up to 5 amps of discharge current. The charger sports an anodised black aluminium faceplate with brushed aluminium accents, easy-to-use push button navigation and enough power to sufficiently charge high capacity batteries with 1-3C charge rates.

Click here to view the features

January 20, 2012

LRP Vector X20 brushless motor

LRP introduce the Vector X20 modified brushless motor. Developed completely from scratch it is designed for highest efficiency and maximum power output. The result of the new design is more power and higher rating at improved temperature characteristics and lowest friction. A novelty of the new technology is the dual axis balanced 12.5mm sintered worksteam rotor resulting in an absolutely precise running and increased efficiency. The larger sized ball bearings and LRP’s PreciSensor system also contribute to the performance of the motors. The CNC-machined 7075-T6 aluminium housing sports optimised cut-outs for best heat absorption and lowest running temperatures of the motor that are available from 4.5T to 9.5T with 4.0T, 5.0T and 10.5T variants will complete the line in the near future.

Click here to view more pictures

January 20, 2012

Xray XB808 & XB9 FRP mud protectors

Xray introduce the CNC-machined FRP mud protectors for the XB808 and XB9 line of 1/8 scale off-road buggies. Designed to protect the rear arms, driveshafts and shock absorbers from rocks, dirt and mud the parts are ideal when running in wet and dirty racing condition. Developed for direct installation the protectors do not require body trimming or the drilling of additional holes.

Click here to view a picture of the mounted protectors

January 20, 2012

Kyosho Inferno GT2 Race Spec

Kyosho’s Inferno GT2 1/8 scale on-road cars receive a Race Spec upgrade and now sport a hardened main chassis plate, composite chassis stiffeners, KE25 big block engine with polished tuned pipe and header, and a 3-piece racing clutch that works the updated 2-speed transmission. Included in the ReadySet called package are also Kyosho’s latest KT-201 computerised 2.4GHz radio system, KS-200 high-torque metal gear servos and your choice of a Corvette 2007 C6-R or Audi R8 LMS body shell. Both cars will be available from March.

Click here to view more pictures

January 20, 2012

VBC Racing T3 chassis kits

VBC Racing introduce two new chassis kits for the Xray T3 2011/2012 electric touring car. Available as flex and stiff variant the kits include new designed 88mm wide chassis plates of 2.0mm or 2.5mm thickness, redesigned 2.0mm/2.5mm top deck, redesigned front and rear shock towers with additional shock angle adjustment positions, graphite front bumper plate with transponder mount, motor guard, adjustable battery stops and a new ball-raced low CG steering system CNC-machined from 7075 aluminium. Depending on the variant the chassis plates come plain or heavily machined to give the desired torsional characteristics with the flex version is being best used on asphalt and low-grip surfaces and the stiff version on high-grip tracks such as carpet and high-traction asphalt.

Click here to view more pictures