New from Hudy, this specially developed high-quality engine after-run oil can be used in any nitro engine. It helps protect the engine internals from corrosion and should be used when storing the motor after running. Filled in a handy 50ml bottle, made in Europe.
Source: Hudy [hudy.net]
Robitronic now offers high end competition LiPos for the ambitious racer in multiple different configurations. First up are a pair of hard case 2S stick packs in 6000mAh 60C and 5500mAh 60C versions as well as a 2S 5000mAh 50C Saddle Pack. For 1/8th off road buggies, trudges and monster trucks there is the 14.8 60C hard case pack. It comes pre wired, making it easy to connect directly to your speed controller.
Robitronic have released these new fuel and exhaust coolers. The performance of today’s high powered nitro engines depends on many factors. One of the most crucial but often overlooked influence stems directly from the temperature of the fuel that enters the carburetor, the cooler the better. They offer a selection of fuel and exhaust coolers that efficiently lower the temperature of the exhaust gasses used to pressurize the fuel tank. These coolers are made from aluminum with large fins for excellent heat transfer and are available in black or red and as a complete set or separately.
Source: Robitronic [robitronic.com]
Yokomo have released these optional kingpin spacers for their 1/12th scale R12 and GT500 chassis’. The pack of spacers includes 0.5mm (4), 1.0mm (2) and 2.0mm (2) and allow the user to adjust the ride height be placing them under the steering knuckle as shown in the photo above.
Source: Yokomo [teamyokomo.com]
Pro-Line have released their new Suburbs 2.0 2.2″ M3 (Soft) Off-Road Buggy rear tires. Introducing the next generation in indoor clay and outdoor blue-groove race tread technology from Pro-Line, the Suburbs 2.0 rear buggy tires. This tire represents the culmination of years of research, development and track testing to give you the best traction and the longest wear available. Featuring a taller tread and more pins which provide longer wear and more traction, subtle changes were made to the tread design to make them produce faster lap times on a variety of racing surfaces.
Source: Pro-Line [prolineracing.com]
Pro-Line have released their new Caliber 2.0 SC 2.2”/3.0” M2 (Medium) Tires for Slash, Slash 4×4, SC10, Blitz and Ultima Front or Rear. The Caliber 2.0 SC takes tire technology to the next level by optimizing traction, control, balance and tire wear with its dual-stage design and wider contact patch. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.
Source: Pro-Line [prolineracing.com]
Having brought you a sneak peek at the new Chevy Silverado 1500 Pro-2 body shell, Pro-Line have released Pro-Line have released their new body for the Slash, Slash 4X4, SC10, Ultima SC and Blitz. This body features ultra-low, sleek body lines and distinctive Chevy details that will make your SC truck look good going around the track. 1 piece bolt-on number plates and side dams complete the race look.
View more images of the Silverado here
Boca Bearings is pleased to announce their new and expanded line of MX Engine bearings for radio controlled engines. RC engines have evolved and become even more powerful. Today they use more nitro fuel and come under greater thrust loads than in the past. The nitro content can dry the thin stock bearing retainer very quickly making the whole bearing susceptible to premature failure when subjected to high radial and thrust loads. These MX bearings have a unique and new internal design to increase load capabilities that allows them to work under harsher operations where shafts come under excessive side and radial load. These bearings are available in both a standard high-speed version with either chrome steel balls or races, or as a ceramic hybrid, with ceramic balls and chrome races. For a limited time Boca Bearing will be offering an additional $10 discount on all MX bearing kits. Full bearing kits are available for engines such as Nova Rossi .21/12/15/21/28 size engines, OS 15/18/20/21/25/26/28/30/32/37/40 size engines, Picco 15/21/28/40/45 size engines, Collari, Sirio and more.
Source: Boca Bearings [bocabearings.com]
