T-Work’s Racing have released this new skin decal for the new Airtronics/Sanwa MT-4 transmitter. Available in 3D graphite or shiny graphite versions, it is easy to apply, will stay in good condition for a long time and when you want to remove it, it wont leave any nasty residue. Supplied pre cut on an A4 sheet.
Source: T-Work’s [rc-tworks.com]
CRC have released a number of new products starting with these new molder spur gears. The new spur gears use a 16 ball design to increase contact surface so your diff nut requires less tension to keep the diff from slipping. Less tension on the diff parts means more racing and less rebuilding. These new gears also use 3/32″ balls rather than 1/8″ to keep the rotating weight down and not sacrifice punch by adding the extra balls. Available in 76, 80, 88 and 96T. Also new is the rear top plate which closes in the rear pod, making for a stiffer, stronger pod. This does add some weight as you will have to replace the micro left bulkhead with another motor plate, but is especially helpful in modified where the extreme horsepower can cause some flex. This also makes the rear bottom plate more resistant to breakage during crashes. Finally there are new carbon fiber camber gauges that allow you to quickly and accurately set your camber. Works on 12th and 10th scale cars with measurements from 0.5 to 3.0 in 0.5 increments.
Quaggies have now expanded their range of Waterproof RC Dirt Bags to cater for the fast growing RC Crawler niche. These new sized bags are specifically designed with the crawling enthusiast in mind and are perfect for transporting their crawlers to and from their trail. As with all our RC DirtBags, the new RC Crawler Bags are 100% waterproof, mud proof, oil and fuel proof, helping to keep your clothes, car seats and car boot/trunk clean and dirt free after a crawling session. Designed to enclose just the bottom half of the model only, keeping tyres, dirty chassis and running gear enclosed and away from its surroundings during transportation, whilst allowing air to circulate around the rest of the car whilst your expensive Motors and Electronic Speed Controllers cool down safely and naturally.
Source: Quaggies [quaggies.com]
Speed Power have introduced two new LiPo packs, the first is this 6500mAh 7.4v battery with a 65C rating, while the 2nd is a similar 6200mAh pack with a 65C rating. This stick pack configuration features the now obligatory hard casing for impact protection, with both batteries featuring bullet connectors.
By popular demand JConcepts is bringing the Rulux 12mm hex design to the SC10, SC10 4×4, XXX-SCT and similar wheel offset applications. Rulux wheels are 1:1 inspired and no detail has been missed with these beauties as the Rulux wheel incorporates a lug nut and spoke affect that emulates the real thing. Wheel profile, interior and exterior ribbing and spoke design were all areas of focus while creating the combination of durability, clearance, functionality and appearance. To use the 12mm hex wheel on the SC10 or XXX-SCT it requires an inboard hub conversion for the front and JConcepts new hex adapter at the rear. Precision machined and blue anodised aluminium features a clamping style design that combines durability and functionality.
View the rear hex adapter here
DE Racing has released a new ‘Trinidad’ wheel for the Team Losi Ten SCTE 4wd short course truck. These wheels include all the same features of our ‘Trinidad’ line with a bolt on OEM fit and are currently available in black, but will be released in silver and white very soon.
Source: DE Racing [deracing.net]
New from Factory Team is this optional C tower in 2.5mm carbon fibre to be used with the aluminium rear hubs. Used by Ryan Cavalieri and Ryan Maifield at the 2011 Reedy Race of Champions on the B4.1 buggy, it lowers the outer link positions for lower roll center providing more rear end stability. Suitable for the B4, B4.1, B44, T4, T4.1, SC10.
Source: Associated [rc10.com]
Serpent have released these new shock caps for their S811 Cobra buggy and truggy. Made from 7075 T6 aluminium, they are further hard anodised to be more durable with less wear in the pivot area. Laser engraved with Serpent logo.
Source: Serpent [serpent.com]
