Red RC » Products

January 7, 2011

Nitrosisters Xray X10 235mm conversion kit

Nitrosisters have released this 235mm conversion kit for the Xray X10 200mm chassis. Supplied with lightweight hub extensions and made of 7075-T6 aluminium, they key into the hubs for a precise, wobble free fit every time and also have a locating ring for the wheel to centre on. Each hub extension is 15mm wide, bringing your stock Xray X10 to 230mm which allows the driver to tune the rear track width with shims to get just the right width for the body of choice. The wide front end plate included two sets of front end holes, the inner set is for 200mm bodies while the outer set is for bodies with wheelbase from 220mm till 225mm. The included adjustable turnbuckles are made of titanium.

Click here for more information

January 7, 2011

CRC 2011 LiPo pack line-up

Calandra Racing Concepts has been very busy in the lab brewing up some powerful LiPo packs for 2011. All the batteries are specially built to their high standards of performance and durability. They mold their own cases, layup the lithium polymer chemical and assemble the cells to produce race winning packs that out perform all others, on the track and on the test machines. Unlike the many sticker manufactures that simply re-label some off the shelf LiPo cell, they make performance batteries, not just decals. The new line-up includes a 6300mAh 50C 3.7V 1S pack, a 5600mAh 65C 3.7V 1S pack, a 5600mAh 65C 7.4V 2S pack and finally a low price 6100mAh 55C pack which is pre wired with deans connector. All packs are ROAR approved.

Source: CRC [teamcrc.com]

January 7, 2011

KM H-K1 aluminium servo saver set

New for the H-K1, KM Racing have introduced this all aluminium hex type servo saver. Machined from high quality aluminium and anodised gold, the new system offers longer life and reliability over the standard plastic version. The set includes the bearing shaft, both upper and lower servo saver parts and spring.

Source: KM Racing [km-rc.com]

January 7, 2011

Xray NT1 lightweight gear diff pins

New from Xray for the NT1 are these aluminium hard coated pins for the gear differential. For serious racers who are conscious of weight savings, these diff pins are 64% lighter than the standard versions. CNC-machined from premium lightweight Swiss 7075 T6 aluminium, the hard-coating gives extra durability and long life. Sold in a pair.

Source: Xray [teamxray.com]

January 6, 2011

S-Workz UFO buggy wheel

S-Workz have introduced their new UFO 1/8th scale buggy wheel. Available in 2 colours, yellow and white, the new wheel is lighter, bigger in diameter and is stronger thanks to their new ribbed design on the inner face of the wheel. Available now in sets of 4.

View more images of the wheels here

January 6, 2011

Yeah Racing plug holders, tire holders & steering wheels

Yeah Racing have released a number of new products starting with a range of glow plug holders. The version shown above is for holding 4 turbo plugs, but there is a version for standard plugs as well as versions for single plugs, both standard and turbo. All are available in anodised blue and black. Next up is an aluminium tire holder for 1/10th scale EP and GP cars, a handy system to keep full sets of tires together. Available in black, blue and orange. Finally there is a range of aluminium transmitter wheels suitable for Futaba, KO, Sanwa and Spektrum radios that come in anodised blue, dark blue, purple, green and red.

View the other parts here

January 5, 2011

Serpent Cobra rear uprights & diff coupler

Serpent have released a number of new parts for their S811 Cobra starting with these new rear uprights. Made from 7075 T6 aluminium they are very light and durable and offer a superb bearing fit and support. Grey anodised and laser engraved, they are available in left and right versions. Also new for the Cobra is this differential coupler in spring steel that enables the use of an extra 13x19x4mm bearing. The extra bearing on the coupler creates a more durable package.

View the diff coupler here

January 5, 2011

Thunder Power RC Z3R-S brushless motors

Thunder Power RC have introduced their all-new Z3R-S Stock Spec and Z3R-M Modified 540-Class sensored brushless motors for cars, trucks, buggies and more. The Z3R-S Stock Spec motors are available in 10.5T, 13.5T, 17.5T and 21.5T winds, while the Z3R-M Modified motors are available in 3.0T, 3.5T, 4.0T, 4.5T, 5.5T, 6.0T, 6.5T, 7.5T, 8.5T and 9.5T winds, all ROAR approved and ready to race at sanctioned events and beyond. Z3R motors are easy to maintain and tune with a fully rebuildable design and are supported by a full line of replacement and option parts, including ROAR approved tuning rotors, that keeps them optimized and on the track. Each motor is constructed from high-quality materials including a balanced, high-strength neodymium rotor, high-temperature coated copper wire and plated copper solder tabs, while features including easy-to-set adjustable timing from 0—50 degrees and fast-switching, high-temp sensors make it easy to maximize performance. Designed and developed from the ground-up, tested rigorously and race-proven in the hands of top racers world-wide including Paul Lemieux and others, Z3R 540 brushless motors are built to deliver maximum performance and reliability and are backed by Thunder Power RC’s industry-leading 2-year warranty and 2-years of 50% off damage replacement program coverage.

Click here to view the endbell