Red RC » Products

December 17, 2010

Xray Column – RX8 What? How? When? Part 1

The 49th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, in preparation for the release of their upcoming Rx8 1/8th scale on road chassis, Juraj talks about how due to communism in his home country he was forced to develop and hand make his own 1/8th chassis’ and other equipment and how this all gave rise to the Hudy company and in turn Xray.

In 1984 I redesigned the complete car and I was one of the very first in the world to make a real and complete 4WD drivetrain with fully independent front & rear suspension. I was motivated from full-size rally cars that had 4WD drivetrain systems, and I gave myself a new challenge to incorporate this system into my cars. Of course I did not have access to specialized belts and as such my 4WD system was based on central drive shafts.

Read the full column here.

Source: Xray [teamxray.com]

December 17, 2010

Xray RX8 to release in February

As expected Xray have announced that their all new RX8 1/8th scale on road chassis will be released at the Nuremberg hobby show at the beginning of February and the kits will be available in limited quantity at the end of February. The first batch is very limited, so if want to be one of the first to get get one, you better get your pre-order in now. Part number #34 0000.

Source: Xray [teamxray.com]

December 17, 2010

Xceed RC mechanics gloves

Xceed RC have released these high quality and very strong mechanics gloves. Available as a set or individually in only left or right, they do a great job protecting the hands of the mechanic while refueling and other pit-stops. A padded velcro strap, featuring the Xceed logo, helps adjust the glove to the correct size wrist. Available in sizes from L up to XXL.

Source: Xceed [xceedrc.com]

December 16, 2010

Axial XR10 Machined gears & titanium gear shafts

Axial have released a number of new items for their XR10 crawler, beginning with these machined gears. Precision CNC machined, the complete set of machined gears will reduce your internal rotating mass by over 15% as well as increase strength and efficiency. Axial have also released precision CNC machined titanium gear shafts, which not only increase strength and efficiency but help reduced the internal rotating mass by 40% over the stock Axial XR10 steel gear shafts.

View the gear shafts here

December 16, 2010

Tresrey DEX410 red carbon chassis plate

Tresrey have released this awesome looking red carbon chassis for the Durango DEX410 buggy. About half the weight of the standard aluminium chassis plate, it features kick ups on both the front and rear of the chassis and is a direct replacement for the original. The chassis plate is softer however than the aluminium version and therefore is better suited to low grip conditions.

View more images of the chassis plate here

December 16, 2010

KM H-K1 red clutch shoe

KM Racing have released this new red clutch shoe for their H-K1 200mm chassis. The new material slips less than other versions for better acceleration and is perfectly suited for high grip tracks with lots of corners.

Source: KM Racing [km-rc.com]

December 16, 2010

Torrance Deguzman joins HPI R&D team

HPI Racing is proud to announce the addition of Torrance Deguzman to HPI’s R&D team. Torrance is a Southern California local who graduated from the University of California, Irvine, with a Bachelor of Science Degree in Mechanical Engineering. Torrance was introduced to his first R/C car at the age of ten, and it has always been more than just a hobby for him, it is his passion. He has made that very clear by having over ten years of experience working in the R/C industry, as well as having designed a wide array of vehicles. From two wheels to four wheels, nitro to electric, on-road to off-road, 1/18th-scale to 1/5th-scale and entry level RTR’s to reigning IFMAR World Champion vehicles, Torrance has positioned himself amongst the industry’s finest designers. Torrance had the following to say about joining the HPI Racing family:

HPI is famous for creating fun and exciting products, and it is evident in vehicles such as the Baja 5B, Mini-Trophy, Cup Racer, and all the way back to the original RS4 series. I am honored to have the privilege to be part of the HPI team and to continue this tradition of innovation and originality.

Source: HPI [hpiracing.com]

December 16, 2010

CRC releases for December

CRC have released a number of new parts including this Encore shock shaft extender that replaces the stock ball cup on the end of the shaft allowing you to use any size/length of standard 4-40 ball cup. This allows you to make the shock quite a bit longer to fit on other manufacturers cars. Popular on some 1/10th scale oval cars, these new aluminium shock tower mounts allow you to vertically mount your carbon fiber shock tower to your chassis and also work well for mounting mini servos, such as the JR 3650, flat in 1/12th scale and 1/10th scale pan cars. New for the RC12R5 and similar to the CRC front ride height shim set, this new set comes with 3 pair of shims, 1 pair each of .010″ (0.25mm), .020″ (0.5mm) & .030″ (0.75mm). Team CRC have also created these two molded plastic pinion trees. This all new design sports pinion storage on all 4 sides which allows you to store a huge range of gears. The smaller tree holds pinion gears 18-45 teeth, while the larger tree holds 46-67 tooth gears. Finally CRC have released this simple foam car stand, perfect for under your pan car.

View the other products here