Red RC » Products

July 9, 2020

R1 Wurks V16 Drag Racing Tuned 3.5T & 4.5T motors

Coming from R1 Wurks are their new V16 Drag Racing Tuned 4.5T 7500kv & 3.5T 9000kv motors. For the past few months, R1 Wurks been testing and gathering datalogs using their Digital 3 ESC, from some of the fastest RC drag racers around the U.S.. That amount of data allowed the company to understand the need for efficient power conversion, with the goal of generating the most power while controlling the amp draw to a minimum. With that goal in mind, R1 Wurkd created a line of custom built motors set for different budgets to make the most bang for the buck. Our base tune starts with the Drag Racing Tuned variant and upgrades go all the way up to the All Out Build. The full build comes with winding resistance measurements, rotor magnetic data sheet, sensor alignment, hand picked stator, full titanium screw kit pro installed and the gold standard in ceramic bearings, all pro installed. Other builds include hand-picked stators, aligned sensors and hand-picked stators, as well as aligned sensors, hand-picked stators and titanium screw kits. Full details can be found on R1 Wurks’ website here.

Source: R1 Wurks [r1wurks.com]

July 9, 2020

Smokem Racing R12 carbon fibre camber link shim set

Coming from Smokem Racing and made for the ARC R12 touring car is a carbon fibre camber link shim set. Made from 100 percent carbon fibre, their design allows racers to adjust the inner camber link position on the ARC R12 with ease. No longer there is a need to completely remove the upper link brace, add or remove spacers but with the shims drivers simply loosen the screws, remove or add shims as needed, then retighten the screws. The set comes complete with four shims in 1.0mm thickness and four shims in 1.5mm thickness.

View another image here

July 9, 2020

Ministry Of Bearing S35-4E fan mounts

Available now from Ministry Of Bearing is are their new carbon fibre fan mounts for the SWorkz S35-4E 1/8th electric buggy. Machined from high-quality carbon fibre the mounts attach to the centre bulkhead, pointing towards the motor can for sturdy and reliable mounting of a motor cooling fan. The mounts are available for 30mm and 40mm fan units and aluminium threaded inserts ensure proper mounting of the fan unit.

View another image here

July 8, 2020

JConcepts B6 series 15.5mm alloy servo horn

Coming from JConcepts and made for Team Associated’s 6th generation buggies and trucks is a 15.5mm aluminium servo arm. One of the critical points of racing comes from the steering servo and proper servo horn. The horn transfers all the torque from the servo to the steering bell cranks and this piece needs to be created with precision and durability. The JConcepts servo horn created for both 23T and 25T count has all the geometry necessary as a direct bolt-on for the B6, T6 and SC6 generation of vehicles. The broad base of the horn tapers to the connection area where the steering takes place. The heavy-duty boss on top protects the ball-end and provides a hefty surface for steering direction. Small ribs have been added on the sides to help strengthen the unit in a twisting fashion and a deep pocket hides the 3mm standard mounting screw. The entire horn has been retouched with chamfer highlight edging and laser etched with JC and the tooth count for high-end looks and authenticity.

View more images here

July 8, 2020

Rusti Design XX4 rear pivot brace

Rusti Design have introduced their new rear pivot brace for the vintage Team Losi XX4 buggy. Made of 5mm carbon fibre sheet the brace prevents the pivot block to be ripped off after hazardous jump landings or hard crashes. The carbon fibre part needs to be assembled with two bolts on the plastic part and it requires to flush the bossing on the rear bumper and longer flat head screws to be mounted on the chassis. Not included are the 4-40 UNC button head screws and 3/16” lock nuts needed for installation.

View more images here

July 8, 2020

RudeBits black 1/8th off-road rear wing

New from RudeBits is a black colour off-road rear wing for 1/8th scale buggies and trucks. At only 50g the wing is very lightweight and moulded from a very flexible material to eliminate the snap affect most similar rear wings have. The wing offers low to medium down force and is adjustable with manufacture rear angled spacers while a position grid on the underside ensures easy accurate hole positioning for fitment to all the current 1/8th scale models. In use the the wing is extremely stable in jumping, eliminating the need of drilled holes as becoming customary at race tracks of late. The wing is available in black colour only.

Source: RudeBits [rudebits.net]

July 8, 2020

Ruddog Race Team T-shirt

Ruddog have introduced their all-new Race Team T-shirt that allows to show your passion to everything Ruddog on and off the track. The shirt is made of 100 percent cotton and it sports the company’s signature black, white and red colours as well as Ruddog logos on the front, back and on the right hand sleeve for instant brand recognition. The high-quality short sleeve T-shirt is available in adult S to 4XL sizes.

View the back of the T-shirt here

July 8, 2020

Team Bomber 1/12th scale pan car kit – Coming soon

Japanese brand Team Bomber, known for their option parts for the Yokomo YRX12 1/12th scale pan car, are currently working on their own competition chassis kit. No official details are available yet beside a teaser image but we bring you more details as their surface.

Source: Team Bomber [teambomber.jp]