Red RC » Products

November 12, 2019

Exotek 30mm & 40mm Fan Blaster alloy shrouds

Exotek have introduced their new Fan Blaster aluminium fan shrouds for 30mm and 40mm fan units. Both shrouds were developed for the use with Exotek’s existing ring-shaped fans mounts and they blast the fan’s air directly onto the motor for maximum cooling effect while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory good looks and extra durable quality. The 30mm shroud was designed for the use with Exotek’s #1718 fan mount while the 40mm variant uses Exotek’s #1756, #1914 or #1718 mounts.

View more images here

November 12, 2019

2019 VRC-Pro Modified class Worlds – Announcement

VRC Racing have announced the 2019 VRC-Pro Modified class World Championships will be held this coming December. During three weeks of action-packed virtual RC racing this year’s worlds will see Nitro and Electric, On-road and Off-road racing as well as everything in between with Rally-X and also Nitro and Electric NASCAR Truck oval racing.

Continue reading here

November 12, 2019

Roche P12 Evo SWB alloy chassis & LH steering knuckles

Coming from Roche are new optional parts for the P12 Evo 1/12th scale pan car in the form of a short wheelbase aluminium chassis as well as hard composite low height steering knuckles. The SWB alloy chassis is cut from 2.0mm material and it comes hard-coated for wear and looks. Using the chassis will improve the car’s performance on tight and twitchy tracks and included in the set comes a carbon fibre front bumper mount. Also new are the low height steering knuckles moulded from a hard composite material. The reduced height of the steering knuckles will allow for a wider range of outer upper arm positions while the hard material improves steering response in high-bite and high-temperature conditions.

View the steering knuckles here

November 12, 2019

Fenix Racing FF7.2F aluminium main chassis

Fenix Racing have introduced an aluminium main chassis for the recently released Fast Forward FF7.2F TC7.2 conversion kit. The chassis was developed in cooperation with Fast Forward and it comes in handy in all high-traction racing conditions as the reduced flex and higher weight compared to the standard carbon fibre chassis will help with overall performance in high to very high grip racing conditions.

View another image here

November 12, 2019

Muchmore Impact FD2 4S LiPo battery packs

Coming from Muchmore are two new Impact Linear FD2 series 14.8V 4S LiPo battery packs with XT60 connectors for 1/8th scale applications. First up is a 6500mAh variant that measures 138x47x47.5mm and weighs in at 545g. It is built using 100C cells and comes pre-wired with XT60 power and XH balance connectors. Also new is a low-profile 5200mAh pack that measures 138×46.5×36.mm at a weight of 452g. Using the smaller capacity pack will kill some runtime but the lower centre of gravity comes in handy especially on higher grip tracks. Like the 6500mAh battery it comes pre-wired with an XT60 power and XH balance connector.

View the 5200mAh battery pack here

November 11, 2019

Arena RC Hyper & Montecarlo wing mounts

Coming from Arena are two new wing mounts for the Bittydesign Hyper and Mon-Tech Racing Montecarlo touring car body shells. The 3-D-printed mounts reinforce the contact area of the wing and body, ensuring higher rigidity, stability and durability. The mounts fit snuggly into the bodies‘ wing mount posts, they come as pairs and are available from now on.

View the Montecarlo wing mounts here

November 11, 2019

MST E92 drift car body shell – Teaser

MST are busy teasing more future 1/10th touring car body shells with the latest being an E92 for 200mm drift car chassis. Resembling a German upper class coupe the 257mm wheelbase body shell is of 194mm front and 198mm rear width and it will hit stores at the end of December.

Source: MST [rc-mst.com]

November 11, 2019

SWorkz S35-3E wide rear suspension conversion

Coming from SWorkz and made for their S35-3E 1/8th scale electric buggy kit is a wide rear suspension conversion kit. The set contains a CNC-machined and hard-anodised 7075-T6 aluminium main chassis, a lower and wider rear shock tower, redesigned arm mount as well as new design rear hubs. The updated rear end geometry will make for increased corner speed and an easier to drive car and it is the setup of choice for most SWorkz team drivers.

View another image here