Coming from Dash is the new Ai V2 programming card for all Ai series electronic speed controllers. The upgraded hard- and software makes for a high degree of user-friendliness while allowing for quick and easy ESC programming without the need of a PC.
Austrian brand Ramp have announced the release of new option parts for the Xray XB4 and XB2, as well as the Team Associated B6.1 and B74 buggies. First up is a carbon fibre shorty LiPo mount for the XB4 buggy. The design allows to use it with both 18.5mm tall LCG and standard height 25mm packs while adjustable battery stops do away with unsightly foam blocks to secure the battery in its current position. The set contains a carbon fibre strap, two battery posts, screws and clips. Also new are new design carbon wing protectors for the Xray XB2 and XB4 as well as the Team Associated B6.1 and B74 buggies. The protectors offer a large contact surface for less stress on the wing during upside down action, while four different mounting screw positions allows to adjust stiffness and overall downforce.
RC Maker have introduced their new Slimflex topdeck for the Awesomatix A800X mid motor MMCX chassis. Designed to reduce the profile of the topdeck, it has been optimised to improve the flex characteristics in low traction asphalt and carpet conditions. It increases the overall torsional flex of the chassis both front and rear resulting in more overall grip. The flex can be altered by either using ST019 screw or removing it from the topdeck. Together with the use of the screws under the motor mount, owners can access a large range of flex characteristics, just like the standard topdeck, but with increased “overall” flex throughout the whole footprint. The rear brace is designed to act as a spring, restricting bulkhead flex at this point but not totally removing it like the standard topdeck. RC Maker recommend using their Med Flex Link, or Flex Dampener on the front of the front bulkheads to remove and excess “over-flexing” of the bulkheads. Additional flex can also be obtained by cutting the rear carbon tab on the topdeck with a Dremel, to increase the length of the flex point to further, increasing flex in the rear of the car. Recommended uses of the Slimflex topdeck include low to medium traction carpet with aluminium chassis, low to medium traction asphalt with carbon chassis and high traction asphalt with aluminium chassis.
Kyosho have announced the soon release of the stock racing specific Ultima RB7SS 1/10th scale 2WD buggy kit. The buggy build on the proven RB7 but includes some useful optionals for the highly competitive 17.5T stock motor class such as a lightweight aluminium ball differential, aluminium driveshafts and alloy front wheel axles. Also included are a slipper eliminator hub for the spur gear, a 0.6mm lightweight body shell and a revised rear suspension geometry for optimised roll characteristics. However, all parts are compatible with the standard RB7, allowing for easy parts carrying and the ability to use the stock specific parts in the “modified” buggy. The kit is rounded out by a low-friction 48dp aluminium pinion gear, as well as X-Gear springs, diff and high-graphite grease. The kit is meant to hit stores this July.
Coming from Team Associated are three new 7.8×3.5mm washers in 0.5mm, 1.0mm and 2.0mm thickness. The spacers are machined from high-quality aluminium and they come blue anodised for wear and looks. They work great as rear hub spacers – for adjusting the wheelbase – on the RC8B3 and RC8T3 series vehicles but are also usable on 1/10th scale kit. The 10-piece sets are available separately from now on.
Coming from Samix and made for the Element RC Enduro trail truck is an aluminium inner and outer driveshaft set. Machined from high-quality aluminium the outer centre driveshaft bodies and inner splines are direct replacements for the standard parts, improving rigidity and durability while adding visual impact. The combo sets include all needed parts to replace the inner driveshaft bodies and they are available in black, green or grey colour.
Yeah Racing have announced the release of their new angled 2S balance charge cable. Utilising all-black wires for a professional look, the harness also makes use of angled heavy duty connectors that ensure high durability and the ability to easily change the battery side connectors from 4mm to 5mm without tools. Included come a pair of 4mm and 5mm bullet-type connectors with the balance side being pre-wires with a 2mm bullet and an industry-standard 3-pin XH connector.
Source: Yeah Racing [yeahracing.com]
Leadfinger Racing now offers a new look for the Team Associated B74 1/10 scale 4WD buggy with the A2 Tactic body shell. The lid not only adds a sleek new look to the ride, but is designed specifically by LFR while keeping the traditional racer in mind. First off, the windshield has been laid down for less rake and the cab pushed back to give the buggy more low profile styling. The combo gives the B74 a super slick and fast look that maintains a lower centre of gravity through out the entire car. Like the A2 Tactic designs before it, the top of the cab has an added roof vent. To help keep everything planted, the rear of the cab has the traditional LFR swoop that disburses air flow to the wing. Added downforce ailerons on the top rear of the side pods also help give the car a balanced feel during high speed straights, cornering and over all jump handling. The body comes in clear with window masks and stickers provided as well as two clear Tactic wings included.
