Red RC » Products

June 25, 2019

Yokomo introduce new Racing Performer offroad springs

Coming from Yokomo are additional 1/10th scale buggy and truck springs as part of their Racing Performer range of option parts. Available very soon are three new front and two new rear springs with the front items being 1mm longer than the previous springs for improved vehicle control during cornering. They come in soft (high grip dirt), medium (astro/carpet) and hard (4WD carpet) variants while the rear springs will offer additional setup possibilities especially on high-grip surfaces with hard (astro/carpet) and soft (high grip dirt) variants being available.

View the other new springs here

June 25, 2019

TMG Speed B74 low rear shock tower

TMG Speed have announced the release of a low rear shock tower for the Team Associated B74 buggy. Machined from high-quality carbon fibre the tower has more adjustability than the stock part and it makes for slightly increased droop which will improve bump handling. The shock stay is available now.

Source: TMG Speed [tmgspeeduk.com]

June 25, 2019

T-Works 34mm universal 4-shoe clutch set

Coming from T-Works is a universal 34mm 4-shoe clutch set for 1/8th buggy, truggy and GT kits. It contains a machined aluminium 34mm diameter flywheel, alloy clutch shoes as well as 4-piece sets of 0.9mm and 1.0mm clutch springs to fine-tune the clutch’s behaviour. Also included are the clutch nut, drive cone and clutch screws. All parts are also available separately for spares or repair.

Source: T-Works [rc-tworks.com]

June 25, 2019

C-Pub professional on-road body stickers

C-Pub from France have announced the release of their new body shell stickers for 1/8th and 1/10th scale on-road bodies. The stickers are professionally printed on ultra-light liner material and they are fuel-proof without the need for a clear protection layer, making them very light weight with a set of 1/8th scale body stickers weighing in at only about 8g. In addition the stickers are very thin, allowing easy wrapping around contours and curves. The stickers allow to create colourful body shell designs in minutes and they comply with ETS body colour rules. The stickers are also very easy to apply as the glue allows to shift the decals around and it only cures once the stickers are in place and pressed on. In addition to the readily available designs C-Pub also offers custom designs.

View a decorated 1/8th scale body here

June 24, 2019

ZooRacing Zoodiac 190mm GT body shell

The Zoodiac GT body shell for 190mm touring cars is ZooRacing’s latest high performance 1/10th scale on-road body shell and the brand’s first go on the popular GT market. The goal was to create a stylish yet efficient body with advanced aerodynamics while still offering a somewhat scale look to ensure the body meets all current GT/USGT class rules. The lid features a low-slung silhouette to which sports sculptured fender sections that give plenty of room even for larger GT class tyres while the low-profile front hood section optimises the airflow around the fenders and towards the huge windscreen. The latter is designed to offer a slight cab forward design for best possible airflow towards the rear trunk section and rear wing. Going towards the rear of the body, the newly designed side pods not only add to the overall structure of the shell, they also add visual impact and help to balance the overall downforce by offering a slight upwards sweep. The somewhat simple rear trunk lid design helps with undisturbed airflow towards the rear wing, that was designed to meet all GT class rules. The wing is moulded with two cut lines, a standard 10mm section and a taller “outlaw” marking for increased downforce.

Continue reading here

June 24, 2019

Xray 1/12th pan car solid rear axle set

Coming from Xray and made for their X12 series of 1/12th scale pan cars is a solid rear axle set. It replaces the standard diff for a spool axle that improves acceleration and steering in high-traction conditions while offering a low weight, perfect balance and vibration-free running. The axle is made up using a carbon fibre axle shaft and an aluminium wheel hub system and it is also usable on other brand cars.

Source: Xray [teamxray.com]

June 24, 2019

T-Works MP10/9 brass C-hub inserts

T-Works have released a brass C-hub insert set for the Kyosho MP10 and MP9 buggies. The included inserts allow to access the hub’s 0 t0 3 settings while offering a higher weight and increased strength. The added weight is beneficial especially in bumpy conditions or when seeking traction on lower grip surfaces. Laser-etched markings allow for easy identification and the parts are usable for the new MP10 as well as the older specification MP9 TKI4/TKI3 and MP9E and MP9E Evo kits. In addition to the complete set T-Works also offers 2-piece sets of the individual inserts.

View the individual inserts here

June 24, 2019

Mugen MTX6 series adjustable front one-way

Coming from Mugen and made for the MTX6 series of 1/10th scale 200mm nitro touring cars is an adjustable front one-way set. The special design of the one-way allows to combine the exceptional braking performance of a front differential with the cornering speeds of a one-way, allowing to access the best of both worlds all while giving full adjustability using different viscosity oils. Generally a 500k fluid will be standard with softer oils being recommended for smaller, more technical and low-traction tracks while harder oils giving an advantage on larger or higher-grip tracks. The set includes machined alloy one-way housings, a moulded pulley, as well as outdrives and mounting hardware.

Source: Mugen [mugenseiki.com]