Red RC » Products

May 18, 2019

Element RC Enduro Sendero RTR trail truck

Associated Electrics have introduced their all-new Enduro Sendero RTR trail truck, the first vehicle out of their new Element RC line of high-quality ready-to-run vehicles. At the heart of the Enduro is Element RC’s revolutionary Stealth X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional. The transmission features the ability to adjust the rear drive ratio independently from the front drive across three levels: stock overdrives the front end 5.7%, option 1 provides a one-to-one drive ratio front-to-rear, and option 2 overdrives the front end 11.83%. Feeding the power to the tires are 3-piece telescopic driveshafts with an extruded aluminum center section, universal front drive axles, and hardened steel ring and pinion gears. With the Enduro drivetrain, delivering useful power will not be an issue.

Continue reading here

May 17, 2019

Xray RX8 wire anti-roll bars

Xray have announced the release of new wire anti-roll bars for their RX8 1/8th on-road kit. Adding to the 2.6mm front and 2.8mm rear kit swaybars are 2.0mm to 2.8mm front as well as 2.6mm and 3.0mm rear variants that allow to fine-tune the car’s roll characteristics for a variety of surface conditions. The anti-roll bars come laser-etched for easy identification.

View the rear swaybar wires here

May 17, 2019

Yeah Racing XV-01 long carbon fibre rear shock tower

Coming from Yeah Racing and made for the Tamiya XV-01 kits is a long carbon fibre rear shock tower. A replacement for the standard plastic part the carbon fibre item offers improved stability and strength as well as added visual impact. Machined from high-quality carbon fibre the tower comes including mounting hardware.

Source: Yeah Racing [yeahracing.com]

May 17, 2019

T-Works tyre additive applicator pen

T-Works have introduced their new refillable tyre additive applicator pen. Offering 25ml of volume the pen can be filled with your choice of tyre traction compound with the wide applicator brush ensuring evenly soaking of the tyre surface. The semi-transparent design ensures easy recognition of the remaining fill level.

View more images here

May 17, 2019

Tekin introduce RS Gen3 1/10th speed controllers

Tekin have announced the release of their new RS Gen3 and RS Gen3 Spec 1/10th scale brushless speed controllers. The RS Gen3, with an 8.5T motor limit, brings a suite of enhanced features including better power handling and improved tuning features that give racers a host of adjustments. Standard features include an updated HD solder post design for easy soldering, a high-voltage BEC and HotWire compatibility for extensive tuning. Next generation components put more power at the driver’s disposal and new firmware make the RS Gen3 Tekin’s smoothest, best-driving RS ever.

Continue reading here

May 17, 2019

Tamiya GF-01TR 1/14 Monster Beetle Trail

Tamiya have released a first image of their forthcoming Monster Beetle Trail truck based on the new GF-01TR chassis. The classic Tamiya Monster Beetle is an iconic RC kit and this version takes the classic body, shrinks it to a smaller scale, and mounts it on a variant GF-01 chassis called the GF-01TR. The GF-01TR fits the gear-driven GF-01 chassis with reduction gears, also known as portal axles. This modification allows the hobbyist to better transverse trail terrain as it lifts the bottom of the chassis to better clear obstacles that could high centre the vehicle and render it stuck. No word yet on a release date but as the box art seems pretty much done the kit should hit stores in the near future.

Source: Tamiya [tamiyausa.com]

May 16, 2019

JConcepts P2K YZ-2 body buggy body shell

JConcepts have introduced their new P2K body shell for the Yokomo YZ-2 2WD buggy. An evolution of the P2 body, the “K” is sleeker by removing rear down-force features to allow the buggy to turn on the tightest circuits and carpet and astroturf surfaces where traction is always plentiful. The entire centre section of the cab on the P2K has a channel based design to flow directly over the middle of the vehicle to stabilise the at-speed handling. The front of the cab, important to performance, includes the P2 position with heavily recessed front windshield. The JConcepts edge treatment remains on the side-capsule area for air-flow direction by the cab and pointing the force to the rear wing area. The chamfering stands out as a JConcepts design feature on every new shell, the P2K has those elements and in great positions for decals and paint allocation. The P2K takes into account, spur covers and drops over the kit supplied setup. Rear louvers tuck into the rear stance of the shell which can always be customer trimmed for a slight amount of heat escape. The body included two S-type rear wings for durability, rear traction and high-speed tracking.

View more images here

May 16, 2019

Ultimate Racing EFRA 2141 & 2142 exhaust systems

Coming from Modelix Racing are the updated Ultimate Racing EFRA 2141 and EFRA 2142 Off-road Super Strong exhaust systems. On both sets the location of the pressure tap has been modified for better performance and both come with the Fast-Lock pipe and manifold connecting system for easy and reliable connection of the exhaust pipe and manifold. Performance-wise the EFRA 2141 pipe provides a precise and linear throttle response in the low to mid RPM range with great top end speed while offering an easy to control power curve for very demanding tracks with sharp corners and hard to clear jumps. The EFRA 2142 set provides a precise and linear throttle response in the higher RPM range with a great top end speed, making it the perfect choice for big tracks with long straights where high top speed is needed.

View the EFRA 2142 system here