Red RC » Products

September 25, 2018

Ultimate Racing M3X .21 off-road engine

Modelix Racing have introduced the new Ultimate Racing M3X square stroke 3.5cc nitro off-road engine. The O.S.-based power plant is of a 3-port design and was developed to produce maximum power while still offering exceptional tuneability and a linear power band. It comes with a high-quality steel rear bearing and a tungsten-balanced and silicone-filled crankshaft and is meant to be a more budget-friendly alternative to the M3T engine.

View a list of the specifications and another image here

September 25, 2018

HRC Racing TSW Pro Racing body reamer

HRC Distribution have introduced their new TSW Pro Racing body reamer tool. The updated reamer now comes with a screw-on cap to protect both the tool tip while also offering protection for other tools and your fingers. An aluminium handle makes for a low weight while the hardened and gold-coloured tool tip ensures precise body post hole drilling thanks to its sharpness and etched size markings.

Source: HRC Distribution [hrcdistribution.com]

September 25, 2018

Team Associated Reflex 14T & 14B RTR

Team Associated have introduced their new Reflex 14T and 14B ready-to-run off-road vehicles. Both come out of the box already assembled, with a Reedy Power brushless speed control, brushless motor, high-torque digital steering servo, and 2.4GHz radio system. The adjustability offered by the turnbuckles, caster blocks, and rear hubs allow to adapt the suspension setup to various surface conditions. Additional features include three sealed differentials, aluminium steering rack, and lightweight aluminium centre driveshaft. The 14T comes with a pre-decorated truggy body shell while the 14B features a sleek buggy body. Both will hit stores in October.

View a list of the features and more images here

September 24, 2018

RC Cars Cavalieri CAT L1 S2 carbon fibre shock towers

RC Cars Cavalieri from Germany have introduced their new low profile carbon fibre shock towers for the Schumacher CAT L1 1/10th scale 4WD buggy. Shorter than the standard items the shock stays will lower the overall centre of gravity for improved corner speeds and greater overall grip. The towers are cut from 4mm high-quality carbon fibre and they have been successfully tested by 2017 German Junior Champion, Elias Ehrmann.

View the rear shock tower here

September 24, 2018

Xpress Execute XQ1/XM1 anti-tweak battery mount

Designed for the Execute XQ1 and XM1 cars is Xpress’ new anti-tweak battery mount. The multi-piece carbon fibre and alloy construction does away with the need to use reinforced tape in favour of either two carbon fibre hold downs or hook and loop straps. The results are faster battery swaps, improved reliability and also nearly zero tweak issues compared to using tape. The system is usable for all Execute series cars.

View more images here

September 24, 2018

SWorkz S14-3 1/10th 4WD off-road buggy kit

Following a first teaser SWorkz have officially introduced their new S14-3 1/10th scale 4WD off-road buggy kit. The kit takes the S14-2 as a base and features a load of redesigned and improved areas such as the suspension that did away with the front pivot ball design in favour of a standard C-hub and steering knuckle assembly which will greatly improve performance especially when racing on high-bite carpet tracks. All suspension components, including the new front and rear A-arms are moulded from a strong nylon composite material. Also new to the S14-3 is an improved shock absorber system as is the redesigned 7075 aluminium chassis that, in combination with the new carbon fibre upper decks, will improve rear traction. Another area of improvement are the new and unique 5mm axle universal cross driveshafts that are made using the same high-grade steel material SWorkz uses for their 1/8th off-road vehicles. The buggy already prove its competitiveness in the hands of factory driver Micha Widmaier and it will hit stores around mid-October.

View a list of the key features and more images here

September 24, 2018

T-Works introduce new T6.1 titanium hardware

Coming from T-Works and made for the Team Associated T6.1 racing truck are several new option parts such as titanium turnbuckles, titanium ball ends and a screw kit. The turnbuckle kit includes six 64 grade links that are direct replacements for the standard items. Their lightweight yet durable construction will ensure low unsprung masses and high corrosion resistance while adding visual impact. Also new are a 14-piece 64 grade titanium ball end set and a 94-piece 64 grade titanium UFO head screw kit all of which will greatly reduce overall weight compared to the standard steel items while improving the bling factor of your ride.

View the other new parts here

September 24, 2018

Speedzone Silicon Graphene competition LiPo packs

Speedzone have released two new hardcase silicon graphene LiPo competition battery packs. The standard 2S pack is a 6500mAh 120C variant with dimensions of 138.5x47x25mm and it weighs in at 296g. The shorty batterie is a 5000mAh 120C pack that measures 96x47x24.8mm and weighs 208g. Both packs have 5mm bullet connectors and come with the battery leads and standard JST-XH balance plug.

View the shorty pack here