Coming from Mibosport is their new Team Wear T-shirt collection. Available in Navy, Military Green, Irish Green, Blue, Purple and Orange colour the shirt features a flashy Mibosport logo that is printed on high-quality heather style shirts. The tees are available in all popular adult sizes from now on.
KO Propo have introduced their new Electric Switch 3, an electronic on/off switch for nitro and gas-powered RC cars. The compact device measures 39.2×17.5×9.5mm and it weighs in at 10g. A two digit LC display allows to monitor the current and minimum receiver battery voltage and a LiPo protection mode ensures Lithium-Polymer-based batteries will not get deep discharged during operation. In addition the internal CPU will ensure maximum safety by preventing sudden connection looses due to voltage drops or overload. The translucent case ensures good visibility of all operation parameters and two mounting lashes make installation easy. The switch works with most transmitters and receivers and it is available from end of September.
View a list of the specifications and more images here
Coming soon from Blitz is their new GT3 body shell for 1/8th GT vehicles. Designed for 323mm to 328mm short wheelbase chassis with a track width below 313mm the body is of a more compact appearance. The included rear wing will provide exceptional downforce for improved car control at low and high speeds. The body is available in a standard 1.0mm and a lightweight 0.8mm variant including light decals, window masks and wing mounting hardware.
Arena RC Racing have released a first teaser image of their forthcoming 1/10th 4WD touring car. The shaft-driven kit seems to target the competition market as it features front and rear swaybars, a floating servo mount, and widely adjustable suspension components. No official information apart from the image is available yet but we keep you up to date on the progress.
Source: Arena RC Racing [facebook.com]
Muchmore have announced the release of their new 1800mAh 6.6V LiFe receiver battery pack. The hump-style pack is usable with all vehicles that require brick-type batteries with the Muchmore pack measuring 56x30x32mm and weighing in at 88.5g. The battery is usable with all standard voltage receivers and servos and it comes pre-wired with a universal receiver plug an JST-XH balancer connector.
Source: Muchmore [muchmoreracing.net]
Exotek have introduced more option parts for the Team Associated B6.1 buggy. First up is a 2-colour rear hub set. Coming in a stealthy 2-colour anodised finish, the hubs are 1g lighter than the AE alloy items thanks to careful cutting and shaping and they offer additional ballstud mounting positions. They also include 2mm roll centre alloy spacers to match the stock geometry of the Associated alloy hubs and the updated design works as either the left or right hub, giving more camber link hole options. The alloy hubs require the use of shorter ball studs such as ASC91047 or ASC91752.
Coming from MiniPro is a 2WD chassis version of their chassis dynamometer system. The device allows to measures the RPM, kV, voltage, current draw, power and torque output of vehicles up to 370mm wheelbase and 370mm width. This dyno is ideal for motor analysis, ESC and boost adjustment, brushless sensor adjustment, gearing calculation, tire selections, and much more. It is coupled with to a knurled roller via a pulley and belt to accelerate the inertial flywheel. The electronic board takes the flywheel’s inertia, measures the rate it takes to accelerate and calculates the output power and torque of the vehicle. The dyno repeatedly measures and calculates power in small increments to produce an accurate graph on a PC of the engine’s power characteristics. The vehicle is stopped onto the dyno with adjustable belt stripes, allowing to use a multitude of different chassis such as 1/10th formula, 1/10th and 1/12th pan cars. The dyno is available including or without flywheel unit and it us usable with MS Windows 7, 8 or 10 PC systems.
Source: MiniPro [minipro.com]
Motiv RC have introduced a set of aluminium can screws for the MC2 series of brushless motors. On top of weight savings, these screws will eliminate a portion of the eddy current brake or non working magnetic field on the motor. The screws are of 2.5mm thread and are 42mm in length. The three combine for only 1.5g in total weight which is less than half of their steel counterparts.
Source: Motiv RC [motivrc.com]
