Red RC » Products

July 31, 2018

PSM B6.1 series front shock towers

PSM from Germany have introduced their new carbon fibre shock towers for the Team Associated B6.1 series of 2WD buggies. Available in two variants for the B6.1 and B6.1D, both shock stays offer a refined suspension geometry and +1mm forward shock alignment for improved performance on the specific surfaces. The weight-optimised shock towers sport a reinforced design for optimised durability and low weight and they are cut from high-quality 5mm carbon fibre.

View the B6.1D specific shock tower here

July 31, 2018

Arrowmax 1/32 Mini 4WD rim remover

Coming from Arrowmax is their new professional Tamiya 1/32 Mini 4WD series rim remover. The handy tool allows for hassle-free rim removal on Tamiya’s popular 1/32 Mini 4WD cars and it is made of black anodised aluminium and sports Arrowmax’s signature honeycomb design and black/golden colours.

View another image here

July 31, 2018

Yeah Racing Hackslider mini drifting gyro

Yeah Racing have introduced their new Hackslider mini drifting gyro for Kyosho Mini-Z and 1/10th scale vehicles. Measuring only 15x21x8.mm and weighing in at 3.5g the gyroscope is easily mounted on the small Mini-Z vehicles, utilising the standard connectors or using the supplied adapter wires for larger 1/10th vehicles. The gyro is usable with standard and digital servos, it is fully adjustable, using on-board programming or a third transmitter channel, and it ensures a perfect drift angle through the corners thanks to a pre-loaded, customised firmware.

Source: Yeah Racing [yeahracing.com]

July 31, 2018

Capricorn LAB C8SR aluminium motor spacer

Capricorn have introduced an aluminium motor spacer for the LAB C8SR 1/8th stock chassis and similar cars. The spacer is machined from aluminium and its heatsink design will ensure lower operation temperatures of the motor with the latter also being located closer towards the centre of the chassis for an optimised weight balance. In addition the spacer’s multi-hole design allows to rotate the motor to achieve better access to the soldering terminals.

Source: Capricorn [capricornrc.com]

July 31, 2018

Yokomo release new YZ-4 & YD-2 optionals

Coming from Yokomo are new option parts for the YZ-4 buggy, YD-2 drift car and the Racing Performer motor series. First up are aluminium 8 degrees C-hubs for the YZ-4 4WD buggy. Offering a lower caster angle than stock the hubs increased steering response and tuning capabilities on dirt surfaces. The parts are machined from high-quality aluminium and they come black anodised and with machined silver edge details. Also new is a ceramic ball bearing set for the YD-2 series of drift cars. It includes six 1050 and two 1150 gearbox bearings that will greatly reduce natural friction for improved throttle response and top speed. Last but not least is a precision bearing set for the M3, M4 and D1 Racing Performer motor series. Included are a front and a rear bearing whose high precision will ensure a more efficient performance for better acceleration, top speed and durability.

View the other new parts here

July 31, 2018

Serpent Spyder SDX4 Evo 1/10th 4WD buggy kit

Serpent have introduced the Spyder SDX4 Evo 1/10th scale 4WD buggy kit. Based on the EFRA European Championship winning platform the Evo variant offers a refined design to ensure the buggy is ready to take all sorts of surfaces and track conditions. Motor, battery and speed controller can be mounted in a variety of locations, ensuring wide control over the buggy’s weight bias. The buggy builds on an aluminium main chassis and offers several features to fine-tune the chassis flex, such as a rear carbon fibre chassis stiffener. The 4WD shaft-drive train is equipped with quick-release differential cases, an aluminium motor mount and centre bulkhead as well as a carbon fibre upper diff plate. Alloy suspension brackets, 10° C-hubs, and 0° rear uprights ensure high durability while alloy shock absorbers with 3.2mm shock shafts, X-rings and moulded pistons soak up even harsh terrain. Other features include carbon fibre shock towers and servo mount, gear differentials, and new-style and material ball joins. The kit is rounded out by a sleek body shell and it will hit stores very soon.

View a list of the features and more images here

July 31, 2018

Bittydesign JP8 Ultra Lite Weight touring car body

Bittydesign’s popular JP8 190mm touring car body shell is now also available in an Ultra Lite Weight variant. Designed for carpet and asphalt racing alike the body is moulded using a special process that results in greatly reduced mass with an overall weight of about 68g to 71g being achievable depending on paint, stickers and rear wing. The result is less body roll, better rotation while maintaining an easy to drive feeling and also increased corner speed. The body is moulded from high-quality Lexan polycarbonate material and it comes including overspray film, window masks and pre-cut decal sheets.

View more images here

July 31, 2018

Xray graphite rear gear diff axle shaft

Xray have introduced a graphite axle for their pan car gear diff sets. 50 percent lighter than the standard steel shaft the rear axle will lower the car’s overall weight while offering very smooth and true running for improved efficiency. The graphite part is a direct replacement foe the X12, X10 and X1 gear diffs and it is available now.

Source: Xray [teamxray.com]