Red RC » Products

December 20, 2021

Pro-Line extended body mount kit

This Pro-Line body mount kit includes adjustable body mounts so you can fit more body options onto your Arrma Granite 4×4, Big Rock 4×4, Senton 4×4 & Vorteks 4×4. Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security, and styling of Pro-Line’s innovative screw on body mounting system. This body mount system opens new body options, like tall SUV-style bodies, that you didn’t have before due to the tall posts included with this system.

View another image of the mounts

December 20, 2021

Infinity IF14-2 flex shock towers

For the Infinity IF14-2, Creation Model have released a new line of flex shock towers. By reducing the rigidity of the shock tower connecting point to the upper bulkhead, the stiffness around the bulkhead section is reduced and the overall chassis flex is increased. When used up front it can result in a calmer initial steering response with the reduction in initial stiffness helps smooth out cornering and can help reduce tyre wear. In the rear it allows for smoother rear rotation. The rear tower comes in regular and horizontal body post versions.

View the rear towers here

December 20, 2021

T-Works 1/10th truck wheels

From T-Works comes these wheels suitable for the TLR22T 4.0 as well as the Associated T4.3, T5M and T6.1, Tekno ET410 and Yokomo YZ-2T F&R. Featuring a 12mm hex, they are available in both yellow and white and come in either a pack of 4 or 8 pieces.

View the other wheels here

December 18, 2021

Bittydesign Hiberya-M 1/10 M-chassis body

Bittydesign have released their 3rd body shell for the 1/10 M-chassis class. Having recently launched the Hiberya 190mm FWD body, today they introduced the Hiberya-M for the 1/10 Mini class. The shapes are inspired by a real car racing in the TCR championship and have been adapted to the proportions and measurements necessary for use with the most common M-chassis models on the market. The design phase took several months to finish every single detail, the attention to detail was obsessive in order to propose a body that could optimise aerodynamics and at the same time remain true in its proportions and aesthetics.

View more angles of the Hiberya-M here

December 17, 2021

Zuykov 1/10 TC setup station

Zuykov, new brand of Russian TC driver Denis Zuykov have released amongst other things, this TC setup station. The idea behind this product is that the kit contains everything you need to set up your car including camber, caster, toe, EPA, droop and ride height. The scale for the camber setting is not at the bottom as usual, but at the top of the setup wheel. This scale is closer to the eyes and its location is much more convenient. Each setup wheel uses 2 bearings for a smooth movement and a scale at the top allows for minimal movement of the bottom over the setup board, greatly increasing accuracy. The top plate can be used on cars up to 210mm wide, adjustable from 40mm out to 40mm in. For owners of Awesomatix A800 the kit includes measuring caster blocks. Thanks to the scale on the side of the setup wheel, the caster and camber can be adjusted simultaneously without the need for a calipers. To change the length of the turnbuckle, there is a 3mm and 4mm wrench in the box.

View more details & images of the setup station here

December 17, 2021

Infinity IF18-2 lay down shock stays & flat tip set screws

Creation Model have released this pair of LD lay down front shock stays for the IF18-2. Made with 2.5mm thick carbon fibre and available in standard and wide versions, the LD stay offers a position one step lower than the conventional tower that is included in the kit while the centre position is the same as the lower hole. It’s designed to be lower so that it does not interfere with the body even when a modern body is installed. Also from Creation Model is this M5x4mm set screw with flat tip which is ideal for fixing the GP car muffler to the muffler stay.

View the other new items here

December 17, 2021

T-Works titanium adjustable camber screws

These new adjustable camber screws from T-Works have been machined from high quality titanium. Lightweight and strong they come in two different versions, 4x15mm and 4x18mm, and are sold in pairs. The ends accommodate a 2mm hex driver.

Source: T-Works [rc-tworks.com]

December 17, 2021

Pro-Line 1973 GMC Sierra 3500 Dually clear body

Introducing the 1973 GMC Sierra 3500 Dually Clear Body for 12.3″ crawlers from Pro-Line. Now you have a crawler body specifically made for dually rear wheels like Pro-Line’s Carbine wheels. The Sierra 1 ton dually is an iconic truck for pulling trailers, campers, or anything you can imagine and now you can recreate your dream rig on your 12.3″ crawler. This body is fully licensed by GMC and has all the details you expect including the extra-wide rear fenders to fit dually rear tires. This body comes clear and includes detailed decals, window masks, and overspray film so you can fully customise the look of your truck.

View more images of the GMC Sierra 3500 here