Red RC » Tires

December 29, 2017

JConcepts Triple Dees 1/8th truck tyre

JConcepts have introduced their new Triple Dees 1/8th truck tyre. Based off of the iconic Double Dees design the tread was developed for loose and tacky track conditions that require small pin designs. Starting with finely spaced square mini lugs, the JConcepts design team spent considerable time proofing this design. Centre bar structure is important for wear characteristics and an overlapping and blended centre bar was created. The bar draws up the side of the pin to maintain all important support but the main stance is low so the tyre maintains its clean-out ability during acceleration. The main-stay of the design is the angled and sharp pins which spread across the carcass in an open pattern touching off the track surface like no other. Near the side-wall the pins have been trimmed and angled to give racers a smooth driving experience as they enter and exit tacky turns or slightly rough terrain. Available in grippy compounds such as blue, green and long-wear R2 the new tyres are packaged in reusable packaging for freshness and convenience and they come including grey Dirt-Tech inserts.

Source: JConcepts [jconcepts.net]

December 28, 2017

JConcepts Fling Kings tyres & Dragon 2.6” wheels

Made for the use with JConcepts’ Sling King Mega Truck body shell as well as comparable vehicles are the new Fling Kings 2.6” Mega Truck tyres and Dragon 2.6” wheels. The Fling Kings is the first true to scale, RC Mega Truck tyre, specifically designed to throw mud, dirt, gravel and grass just like the real thing. They are designed for the new JConcepts 2.6” Dragon wheel, making them even more scale in appearance. The bead of the tyre features a 3-step surface which provides a massive amount of area for glue to rest giving the utmost security for full-throttle mud runs. No details were spared on these mud runners, the V-type tread is replicated to a T and the top of the tread carries a slight recess adding a little touch of depth to the appearance. The soft blue compound which is recommended for dirt, grass and asphalt feels noticeably mushy and sticky and has expanding characteristics and tend to “pizza cutter” during flat out high-speed runs. The gold compound feels harder to the touch, excels on polished or hard surfaces and expands less during high-speeds. Fling Kings tires are complete and include open cell “React” inserts to support the grippy tyres.

Continue reading here

December 21, 2017

Pro-Line Sling Shot 4.3” Pro-Loc sand tyres

Made for Traxxas’ X-Maxx 1/8th scale truck are Pro-Line’s new Sling Shot 4-3” Pro-Loc sand tyres. These tires have been developed from the ground up for extreme X-Maxx punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. The tyre features Pro-Line’s proprietary Pro-Loc technology that creates an ultra-secure bond to the company’s Impulse Pro-Loc X-Maxx wheels while still being removable when required. The reinforced tyre bead fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tyre rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security.

Source: Pro-Line [prolineracing.com]

December 21, 2017

Pro-Line Inversion 1/10th buggy front tyres

Pro-Line have introduced the new Inversion 2.2” 2WD and 4WD buggy front tyres. The tyre is essentially an inverted Positron tread design that has been developed for tracks where ghost pins or almost slicks are ideal. The Inversion features directional grooves much deeper than the Prime tyres combined with a rough textured tread surface for amazing grip even in dusty conditions. New to the tyre is a flatter profile for an improved contact patch over previous tyres. The Inversion is available as a 2WD and a 4WD front variant in both M4 super soft and MC clay compounds.

View the 4WD front tyre here

December 19, 2017

Nemo Racing 1/8th buggy tyre stick

UK company Nemo Racing has introduced the new tyre stick for 1/8th buggy tyres. A clean, simple and effective solution to holding and storing 1/8th scale off road buggy tyres, the tool is made by hand in Germany utilising high quality lightweight aluminium material with a chunky knurled nut for the best grip on loose wheels. Weighing in at just 26g per stick, they are a lightweight and compact tyre storage solution and are sold as singles.

Source: Nemo Racing [nemoracing.com]

December 18, 2017

VP-Pro VP-601 pre-mounted 1/10th MT tyre

Coming from VP-Pro is their new VP-601 pre-mounted 1/10th monster truck tyre. Of a new rubber compound the tyre combines grip and durability with the on-road tread making the tyre best used on sealed surfaces such as asphalt and concrete but also hard-packed clay. The tyre sports a 123mm diameter, 68mm width and it comes on 12mm hex Y-spoke rims.

Source: VP-Pro [vp-racing.com]

December 7, 2017

Raceform Lazer Jig carpet/astro tyre conversion kit

Raceform have introduced a carpet and astro tyre conversion kit for their Lazer Jig 1/10th scale buggy tyre gluing tool. The set includes all needed parts to convert the jig from the original soft dirt tyre specification to utilise the somewhat harder artificial surface tyres. The set includes a new pressure plate and mounting hardware, it works with all standard carpet/astro 1/10th buggy front and rear tyres, and it is available separately or including the original Lazer Jig.

View another image here

December 4, 2017

Hot Race Tyres announce updated buggy tyres

Italian company Hot Race Tyres have introduced a new sidewall design for their 1/8th buggy tyres. The updated design features a reinforced sidewall with the new structure greatly improving the tyre performance even in very hot ambient temperatures while reducing the tread wear at the same time. The update is a running change with the new tyres hitting stores this week.

Source: Hot Race Tyres [hotracetyres.com]