July 12, 2013

Gens Ace IMars2 DC multi-chemistry charger

Gens Ace IMars2 DC multi-chemistry charger

New from Gens Ace comes the IMars2 DC multi-chemistry charger. Micro computer controlled and coming with a 32 digit backlit LCD display the device is able to charge and discharge 1S to 6S LiXX, 1 to 16 cell NiXX and 2V to 24V Pb batteries. The charger’s menu is controlled via four buttons and the 100W charge circuitry allows charging rates of up to 10A. The white case is equipped with an XH balancer port and 4mm output connector tubes while the software offers several charge modes and adjustable LiXX cell voltage settings.

Source: Gens Ace [gensace.com]


July 10, 2013

Much More Power Master Mini Evo

Much More Power Master Mini Evo

Much More introduce this compact power supply called the Power Master Mini Evo. It offers up to 10A of constant current, features an adjustable output voltage of 12.2V to 14.0V and an 5V/1A USB charging port. The device measures only 160x70x45mm, weights 377g and is equipped with a single cooling fan, new output terminals and overload, short circuit and overheat protection. Available in black or blue colour it is ideal to power chargers, tyre warmers, pit lamps and many more.

Click here to view another photo


July 9, 2013

Hitec X1-200 Touch multi-chemistry charger

Hitec X1-200 Touch multi-chemistry charger

Hitec introduce the X1-200 Touch DC multi-chemistry charger. The device is designed for the use with a 12V power supply and features a 3.2-inch high resolution touch screen, an integrated balancer and optimized operating software. The charger offers a 200W power circuit and up to 12A of charging and 2A discharge current. Included with the charger comes a universal balancing board, alligator clips and a T-type charging cable.

Click here to view more pictures


July 9, 2013

Vampire Racing 2S LiPo receiver battery packs

Vampire Racing 2S LiPo receiver battery packs

New from Vampire Racing come LiPo receiver battery packs for 1/8th and 1/10th scale nitro vehicles. Available as standard-size 2500mAh hump and 2300mAh straight pack the 2S packs offer a voltage of 7.4V ideal for the new breed of HV-compatible receivers and servos. The semi-hardcase packs come with a protective inner shield and sport a stealthy black heat shrink tube for cool looks and best possible protection of the cells in all racing conditions. Both battery packs are pre-wired with a balancer connector and JR/Futaba-compatible universal plug.

Click here to view the other new pack


July 4, 2013

SkyRC Cheetah 60A motor & ESC combo

SkyRC Cheetah 60A motor & ESC combo

SkyRC introduce the Cheetah 60A sensored brushless motor and speed controller combo set. Based around a 60A speedo the set targets cost oriented 1/10th and 1/12th scale stock racers. The controller is useable with 2S to 3S LiPo batter packs, offers a 6V/3A BEC system, optional fan unit, direct solder tabs, an integrated on/off switch and easy programming via the included programming card that allows the adjustment of parameters such as cut-off voltage, brake and punch settings. Part of the set is also a rebuildable sensored brushless motor with 12.5mm rotor, vented can design and pre-soldered connector tubes. The combo set is available with your choice of a 8.5T or 10.5T to 21.5T stock motor.

Click here to view more photos


June 25, 2013

Nosram Pure 2 brushless spec motors

Nosram Pure 2 brushless spec motors

Nosram have released a line of Pure 2 brushless spec motors. Based upon the extremely successful Pure 2 modified motors, the Nosram crew has developed special spec racing motors that are designed for great performance combined with the perfect control needed for stock racing. Available in 10.5, 13.5 & 17.5 they feature an advanced spec racing magnet, XTEC X20 coolmax housing, dynamic balanced worksteam rotorm optimized racing stack and waterproof preciSensor system. The motors comply with rules set forward by IFMAR, EFRA, ROAR, JMRCA, BRCA & DMC.

Source: Nosram [nosram.com]


June 25, 2013

Patrick Hofer takes 4wd at Swiss Rd3

Patrrick Hofer takes 4wd at Swiss Rd3

Round 3 of the Swiss electric offroad nationals were run last weekend in Obernau (Switzerland) on a multi-surface track combining Astroturf, carpet and wood. On Saturday Associated/Reedy driver Patrick Hofer started showing his domination in the 4wd practice and was a lap ahead of 2nd in qualifying, taking the TQ spot in the 4wd class. In 2wd he placed his B4.2 2nd. During the finals it started to rain so some drivers saw a chance for the win but Patrick’s B44.2 seemed unbeatable on the slippy track and so he won both finals and secured the overall win in 4wd modified ahead of Peter Forster (Yokomo) in 2nd and Patrick Vogt (Durango) in 3rd. In 2wd modified he finished 2nd.

Thanks to Patrick Hofer for the report.


June 25, 2013

Wild Turbo Fan cooling fans

Overtake RC Wild Turbo Fans

Wild Turbo Fan have announced their new range of cooling fans for RC cars. Available in a wide range of powers and sizes, there is a 25mm ESC Fan (RPM 20000 @ 7.2V) with dual ball bearings, a 30mm motor fan (RPM 22000-24000 @8.4V) in deluxe or economy version, 30mm Twin Fans (RPM 22000-24000 @8.4V) with a single connection for both fans and finally a 40mm motor fan (RPM 15000 @ 8.4V) with either ball bearings or bushings.

View the other fans here


Mibosport
VP Racing
T-Works