September 8, 2010

Speed Passion GT2.1 EX series ESC

Speed Passion GT2.1 EX series ESC

Speed Passion have announced the release of their brand new GT2.1 EX series, ideally designed for 1/12th scale applications and 1/10th WGT racing. It feature the all new “Auto-detect” power input that automatically selects the number of cells and there are no need to use a voltage booster or external receiver battery pack even using the single cell LiPo battery. It has the ultra-low profile heat sink design that is flush with the case and it will fit all the 12th scale bodies and 10th scale WGT bodies without any rubbing problem. It is also a perfect fit for 2WD off road buggy which need to be very low in height in order to fit their body.

View more details here


September 7, 2010

X-Power dNano tires, motors & more

X-Power dNano tires, motors & more

X-Power continues to release new products for dNano racers. First up are the foam racing wheels available in four compounds, very soft, soft, medium and hard. The foam tires are pre-mounted and glued to lightweight racing wheels, eliminating the possibility of lost tires during important racing heats. Also new is two new motors, the XTreme for high speed & elevated torque. It has 40-50% more speed and 30% more torque than the previously released ‘hot’ motor and the Radical Black for super torque & elevated speed. It has 35-40% more speed and 40% more torque than the ‘hot’ motor. Additional items include 1:43 scale racing stickers, optional spoiler kit, easy adjust differential & conversion kit as well a much more.

View more of the products here


September 6, 2010

Yokomo YZ-114SPB charger & discharger

Yokomo YZ-114SPB charger & discharger

Yokomo have released the YZ-114SPB, a performance fast charger and discharger. Able to charge the usual range of batteries including LiPo and LiFe, you can monitor the balance of the pack by checking the voltage in each cell through the now built in balancer port. It can be run on DC12V or AC100V, is supplied with all the cables you will need including the temp sensor and comes in the standard silver version of trick looking carbon version.

View the carbon version here


September 6, 2010

Hype RC 1/10 motor cooling systems

Hype RC 1/10 motor cooling systems

New from Hype RC are these 1/10th motor cooling systems for electric motors with cans of 36mm or 44mm diameter. The orange anodised heat sink is supplied with a cooling fan that operates on 5V to 7.2V.

Source: Hype RC [hype-rc.de]


September 6, 2010

Losi SC wheel balancer adapter set

New from Team Losi for their 1/8th tire balancer is this Short Course wheel balancer adapter set which converts it into a 1/10th SC wheel balancer. Designed to balance all manufactures wheels it can be mounted quickly and comes supplied with everything needed to make the conversion.

Source: Losi [losi.com]


September 4, 2010

Intellect 3.7V 5600mAh 50C 1 cell pack

Intellect 3.7V 5600mAh 50C 1 cell pack

New from Intellect is this 3.7V 5600mAh 50C 1 cell pack. Perfect for oval, 1/12th and any class that requires 3.7 volts, it use a new chemistry for longer run times and higher capacity as well as a long cycle life. Sporting a hard case, it is ROAR legal and comes supplied with bullet connectors.

Source: Team Epic [teamepiconline.com]


September 3, 2010

Speedzone 5800mAh 50C 2S LiPo pack

Speedzone 5800mAh 50C 2S LiPo pack

Speedzone have released a 7.4v 5800mAh 50C in a hard case pack, perfect for all applications. Direct connected Deans connectors come standard along with a standard balancing port. With a rating of 50C and nearly 600 seconds of run time at a 35amp discharge, this pack delivers enough power and run time to suit everyone’s needs.

Source: Speedzone [speedzoneusa.com]


September 2, 2010

Peak Racing PowerPro Charger

Peak Racing PowerPro Charger

Peak Racing have announced the release of their new PowerPro Charger. Whether your charging LiPo, LiFe or LiMa or even NiMH or NiCd this charger has got you covered and will keep your cells in proper order cycle after cycle. Charging at up to a maximum of 6A with up to 6 cell NiMh/NiCd and 2 cell LiPo/LiFe, it can handle just 4A for 7-10 cell NiMh/NiCd and 3-4 cell LiPo/LiFe. Discharging current is between 0.1A-1A and it has an adjustable discharge voltage cut off. Featuring up to 10 saved user profiles, its laser blue LCD display lets you easily find your way around the menu.

View the full specifications here


Mibosport
VP Racing
T-Works