September 2, 2014

Yeah Racing Tritronic 60A brushed speed controller

Yeah Racing Tritronic 60A brushed speed controller

Along with the release of their Hackmoto V2 brushed motors Yeah Racing also introduce a suitable speed controller in the form of the Tritronic 60A ESC. Made for 1/10th scale applications with 2S to 3S LiPo packs or 5 to 9 cell NiMH batteries the speed controller features dust and water protection, a 5V/2A BEC system, and three running modes including FWD/Brake and FWD/Brake/Reverse. With its 60A rating the speedo allows to run brushed motors down to 12T with a 2S LiPo pack and it will become available separately or as a combo set including a Hackmoto V2 brushed motor.

Source: Yeah Racing [yeahracing.com]


September 1, 2014

Yeah Racing Hackmoto V2 540-size brushed motor

Yeah Racing Hackmoto V2 540-size brushed motors

Yeah Racing introduce the new Hackmotor V2 540-size brushed motors for all die-hard “vintage” technology fans. Coming in several winding options, such as as a mild modified 13T and a spec racing 23T variant, there are also three very high turn 35T, 45T and 55T motors available. All feature black cans with high-strength magnets, vented motor heads with large solder tabs and cooling towers for the brushes as well as dual ball bearings. The motors are fully rebuildable and available now.

Source: Yeah Racing [yeahracing.com]


August 29, 2014

JQ Products THEeCar steel centre dogbones

JQ Products THEeCar steel centre dogbones

New from JQ Products come steel centre dogbones for THEeCar 1/8th E-buggy. Made to replace the standard aluminium dogbones, the parts offer improved durability when running extreme power setups or on tracks with very high traction and/or large jumps. The driveshafts are a lot less prone to bend under heavy loads and available now.

Click here to view the rear dogbone


August 29, 2014

Arrma Kraton 6S BLX speed monster truck

Arrma Kraton 6S BLX speed monster truck

The Kraton 6S BLX speed monster truck is Arrma’s second 1/8th scale kit following the introduction of the Typhon 6S BLX buggy. The truck builds on a black anodised aluminium chassis plate and features a heavy duty 3-diff drivetrain, long suspension components, aluminium big bore shock absorbers and front and rear anti-roll bars from stock. Universal driveshafts transfer the power of the 6S compatible sensorless brushless motor to the multi-spoke rims with dBoots MT tyres. All electronic components such as the high-torque steering servo and the 180A speed controller are full waterproof while being protected by an inner roll cage at the same time. The truck comes ready-to-run including a 2.4GHz radio system and a pre-decorated bodyshell with a green/carbon or blue livery.

Click here to view more photos


August 29, 2014

LRP NiMH receiver & 1/18th micro batteries

LRP NiMH receiver & 1/18th micro batteries

LRP have new receiver and 1/18th micro battery packs available. Starting with the receiver packs, the XTEC 2/3A NiMH batteries are available in straight or hump configuration and with your choice of JR/universal or BEC compatible plugs. The 5-cell packs are built using high capacity 1600mAh cells and are usable for on-road and off-road applications alike.

Click here to continue reading


August 29, 2014

Novarossi Fast Fuel Gun

Novarossi Fast Fuel Gun

Available from mid-September is Novarossi’s new Fast Fuel Gun. Lighter and offering a higher flow rate the fuel gun helps to speed-up refuelling for faster pit stops. Included with the fuel gun come two suitable stays to place the gun on when not in use.

Source: Novarossi [novarossi.it]


August 29, 2014

Reedy WolfPack Gen. 2 LiPo batteries

Reedy WolfPack Gen. 2 LiPo batteries

Reedy release the next generation of their popular WolfPack LiPo battery packs featuring increased capacities for even longer runtimes and more overall power. Coming as 7.4V variants with 3300mAh to 7500mAh capacity, as 11.1V 4500mAh as well as 14.8V 4000mAh and 5400mAh pack, all batteries features Reedy’s moulded hardcase for maximum crash protection in sizes that fit the most popular car configurations. Wires now exit the case through a rubber gasket which protects the wire’s insulation while helping to prevent moisture from entering the case. High-quality cell manufacturing and construction techniques result in reliable operation and maximum cycle-life. The Gen. 2 LiPo batteries come equipped with beefy silicone wires and a reliable, low-resistance T-plug connector. An integrated balancing harness with a XH connector is included.

Click here to view the other new batteries


August 29, 2014

VBC release new Firebolt DM option parts

VBC release new Firebolt DM option parts

VBC Racing have four new option parts for the Firebolt DM buggy available in the form of aluminium steering bellcranks, a hard-coated aluminium idler gear and two sets of rear suspension mount spacers. Starting with the aluminium steering bellcranks, the parts are machined from lightweight 7075 aluminium and they offer improved stability over the stock levers for a more direct steering response and added durability. The parts come red anodised and are a direct replacement.

Click here to continue reading


Mibosport
VP Racing
T-Works