Red RC

January 25, 2020

Cavalieri doubles up in second round

After a win in the opening round of racing at the Reedy Offroad Race of Champions, Ryan Cavalieri became the first driver to double up at OCRC Raceway with a win over defending champion Jared Tebo. Starting from 6th on the grid, Cavalieri worked his way to the front in his Sworkz getting by on lap 3 after a mistake from pole sitter Cole Tollard. While he had the faster car and looked set to challenge Cavalieri for the lead on a few occasions, bobbles prevented Tebo from making it two out of two with Ty Tessmann completing the Top 3. The other winners of Round 2 would be 17-year-old Broc Champlin who got by long time leader Ron Devoll with a well planned and executed pass on the final lap. Finishing second to Rivkin in Round 1 after an early mistake having started from pole, Ryan Maifield convert a P4 start into a win reversing the Round 1 result as Rivkin came home second followed by pole starter Tommy Hinz who had led for the opening four laps.

Continue reading this report here or view our complete event coverage here.

January 24, 2020

Tebo opens Reedy title defence with first round win

Reedy Race Champion Jared Tebo has opened his title defence with a win in the first race of the 26th running of the iconic event. Starting from pole position with Ty Tessmann alongside, Tebo and the Canadian would go at it for the full 5-minutes with Dakotah Phend joining the battle for what was the most exciting race of the opening round. A mistake by Tebo would allow Tessmann to go to the front until he then had a moment handing the lead back to Tebo. In the end the Top 3 would cross the line covered by less than 3/10th of a second. In the second encounter, Spencer Rivkin took the win over Ryan Maifield, Maifield having started from pole position but dropped down the order after any early mistake in the centre rhythm section. The third race saw the No.4 starting Ryan Cavalieri avoid contact between early leader Shin Adachi and young French driver Clement Boda and once in front the Reedy Race’s most crowned champion pretty much controlled the race.

Continue reading this report here or view our complete event coverage here.

January 24, 2020

Team Associated DR10 RTR drag race car

Team Associated have introduced their all-new DR10 RTR drag race car. The DR10 drag race car is based on the 9-time ROAR Short Course National Championship winning truck and utilises a moulded low-centre-of-gravity chassis, metric hardware, 18 precision ball beatings, a 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch as well as an adjustable suspension. Other features include a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as AE’s all-new DVC Dynamic Vehicle Control receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 is available as ready-to-run package and also in LiPo combo specification including a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug.

View lists of the specifications and features and more images here

January 24, 2020

Sanwa SV-D2 drift car speed controller

UK Sanwa distributor Schumacher has introduced the new SV-D2 brushless speed controller especially designed for drift car racing. The SXR, SSL and Program Box Gen2 compatible ESC is Code 10 programmable using the Sanwa M17, M12S, M12S-RS, EXZES ZZ, and MT-44 transmitters and beside a drift car optimised firmware it also sports a new capacitor mount that allows for neater wiring even when using the optional cooling fan unit. The controller measures 31×36.8×19.5mm, it weighs in at 39.1g and is available now.

View another image here

January 24, 2020

Rêve D 3mm & 3.5mm steering knuckle stoppers

Rêve D have introduced their new 3.0mm and 3.5mm diameter steering knuckle stoppers for RWD drift cars. Coming as pairs the machined aluminium shafts allow for precise steering end point adjustment, make limiting the overall steering throw easy and preventing the wheel from chattering. A task usually taken by set screw the alloy steering stoppers also look a lot more professional while offering higher precision. The stoppers are available as 2-piece sets and the are the perfect match with Rêve D’s #RD-001 ASL front knuckle and #RD-002 ASL front lower arm.

View more images here

January 24, 2020

Arrowmax Medius T4 FWD conversion

Arrowmax is the latest manufacturer to release a FWD conversion kit for pre-2020 Xray T4 touring cars. Making use of their own Medius mid-motor mount design, the AM conversion allows to revive older spec T4 4WD chassis by scrapping the rear drivetrain and converting them into state of the art front-wheel drive tourers. The mid motor design ensures balanced handling, an efficient drivetrain and a lower overall centre of gravity. Included in the set is a new main chassis, a heavy brass front bumper mount, spilt upper decks, a new design floating servo mount as well as miscellaneous other accessories that allow for a full conversion. The chassis set is available in a carbon fibre chassis or an aluminium main plate variant, the latter is best used in medium-high to very high-bite track conditions.

View the aluminium chassis conversion here

January 24, 2020

Rêve D Absolute 1 brushless drift car motor

Following a first teaser image Rêve D from Japan have announced the soon release of their all-new Absolute 1 brushless drift car motor. Developed for the use in high-grip drift car racing, the motor uses an all-aluminium high airflow can for best possible heat dissipation while the setup ensures high top RPM without sacrificing high torque characteristics and a linear throttle feel which is important for racing on P-tile, asphalt and carpet surfaces. The motor will become available in a 10.5T and a 13.5T variant from mid to end of March.

View another image here

January 24, 2020

Yeah Racing Maxx 17mm alloy wheel hex set

Coming from Yeah Racing and made for the Traxxas Maxx monster truck is a 17mm aluminium wheel hex and spacer set. The 7075 alloy construction allows to securely tighten the wheels without having to worry about warping the original plastic part and causing binding. The set includes four aluminium wheel hexes, four wheel spacers as well as set screws and it is available in red or black anodising.

View more images here