Red RC

December 2, 2019

40th Annual U.S. Indoor Champs – Report

The 40th Annual U.S. Indoor Champs were held in Cleveland, Ohio this past weekend, attracting nearly 400 entries. The Modified Touring class was lighting the track on fire with ballistic fast laps and it was shaping up to be a battle of the local boys vs. the international drivers. The local boys would strike first with Sam Isaacs securing the TQ spot. Second qualifier and current 1/12th Scale World Champion, Alexander Hagberg was poised to not let Issacs run away with the win. With things getting off to clean start, two laps into the race Hagberg would unfortunately clip a curb sending him off the track. A couple of turns later, the field would bunch up allowing Isaacs to build up a huge lead with the rest jockeying for position. Before the end tone, local Drew Ellis worked his way up to the second spot and Canadian Keven Hebert rounded out the top three.

Continue reading the report here

December 1, 2019

Samix Enduro 6mm offset aluminium hex adapters

Coming from Samix and made for the Element RC Enduro trail trucks are new aluminium hex adapters with 6mm offset. The wheel adapters are machined from high-quality aluminium and they are available in gun metal, blue or black anodising all of which feature machined silver edge details. The adapters are a direct fit and they come in sets of four including pre-installed set screws.

View another image here

December 1, 2019

SWorkz S12-2 2WD buggy kit – Coming soon

SWorkz have released a first teaser image of their forthcoming new S12-2 1/10th scale 2WD buggy kit. No official details on features and specifications are available yet, however the drawing seems to depict a buggy that lacks a front shock tower which could be a hint on a completely new front end design compared to the previous S12 series cars. We bring you more information on the kit and its details once they become available.

Source: SWorkz [sworkz.com]

December 1, 2019

OfficinaRC T4 2020 crash chassis helper

OfficinaRC have introduced their crash chassis helper for the Xray T4 2020 touring car. The 3-D-printed part was developed to be attached to the front bumper upper brace and it helps to brace the bumper against the front bulkhead in the event of a crash, preventing damage such as bent aluminium or delaminated carbon fibre chassis. The part is a direct fit and available from now on.

View more images here

November 29, 2019

Klinik RC Cat L1 simple battery cradle

Klinik RC have introduced their new simple battery cradle for the Schumacher Cat L1 4WD buggy. The design works with full size shorty up to 6000mAh and LCG packs utilising the full forward battery position which is considered to be the most popular among the L1 racers. The cradle is CNC milled from 3mm carbon fibre and allows changing batteries very simple and easy. Included in the set come two battery cradles, four hold down O-rings, 3x14mm screws as well as a decal sheet.

View another image here

November 29, 2019

Xray T4’20 alloy & brass rear chassis braces

Xray have announced the release of two rear chassis braces, machined from aluminium or brass, for the all-new T4 2020 mid-motor touring car kit. The T-shaped braces are designed in a way that allows to access a total of four stiffness settings by using variable amounts of screws and shims to attach the brace in longitudinal and transversal directions. While the lightweight aluminium is mainly used to stiffen up either the carbon fibre or aluminium chassis, the 15g brass variant also helps to fine-tune the weight balance with the brass T-brace being of help especially for higher grip track conditions. The braces are available separately and they include all needed screws and shims.

View the 15g brass brace here

November 29, 2019

Savöx SB-2262SG Monster HV brushless low-profile servo

Savöx have introduced their new SB-2262SG Monster Series HV brushless low-profile servo for 1/10th and 1/8th scale applications. Offering up to 30kg-cm of torque and a speed of down to 0.065s the high-voltage compatible brushless motor servo provides exceptional performance for all demanding electric and nitro applications while weighing in at only 65g. A machined aluminium case with heatsink design middle section and the overall construction, that was taken over from the SB-229X series servos, ensure high durability. The servo is usable with up to 8.4V input voltage and it sports an all-black receiver wire for stealthy looks.

View another image here

November 29, 2019

7075.it Inferno MP10 closed switch cover

Made for the Kyosho Inferno MP10 1/8th off-road buggy is 7075.it’s closed switch cover. Machined from high-quality aluminium and coming with an anodised surface finish for wear and looks, the laser-etched part replaces the standard switch cover with a closed variant for all drivers that scrapped the standard switch over a DIY “plug” solution.

Source: 7075.it [7075.it]