Red RC

November 25, 2019

RC Maker brass floating battery mounts & battery weight

Coming from RC Maker are new brass optional parts such as floating battery mounts for the Awesomatix A800, Yokomo BD9 and Xray T4 as well as a 33g LCG battery weight plate. Starting with the floating battery mounts, reducing external factors on chassis flex has always been RC Maker’s mission. Chassis flex is one of the most important and sensitive tuning options today, and thats why the company strongly believes it must take all measures to reduce the impact that the electronics may have on chassis flex. The battery is roughly 300g, with a fully flat base contacting the chassis. This, even though it may be loose on the car, will have a detrimental impact on chassis flex. RC Maker’s new brass battery holders float the battery off the deck, and drastically reduce the impact the battery has on the flex of the chassis. The Awesomatix specific mount attaches to all of the Awesomatix model battery mounts, both factory and aftermarket. The Awesomatix mount is also usable on the Xray T4 2017 to 2020 models using optional, non-plastic battery mounts. The Yokomo variant installs directly to both standard plastic, and optional aluminium Yokomo brand battery mounts.

Continue reading here

November 25, 2019

HRC Racing LiHV Racing Pack batteries

HRC Racing have announced the release of their new 7.6V LiHV Racing Pack high-performance high-voltage LiPo batteries. Available as 8500mAh and 6000mAh variant, both batteries make use of Graphene technology high-quality cells for exceptional power output and a low internal resistance. The hardcase battery packs utilise 5mm bullet-type connectors, they include balancing harnesses and they will hit stores soon.

View the 6000mAh pack here

November 25, 2019

Tebo & Bornhorst successful at Buggyland USA race

Thunder Alley Raceway of Beaumont, California held the inaugural Buggyland USA race this past weekend, attracting nearly 170 entries for the usual USA mix of Open, intermediate and Sportsman nitro and electric off-road classes. In Open Nitro Buggy it was Tekno RC’s Jared Tebo with the overall TQ and he would also come out on top in the 45-minute A-main event after a flawless run, leaving behind 4th place qualifier, Mugen’s Ryan Maifield in 2nd while CJ Jelin (Kyosho), runner-up after the qualifiers, would round out the top 3 result. Joe Bornhorst and Tanner Denney would round out the top 5 results.

Continue reading here

November 24, 2019

Bezerk RC B6.1 series carbon fibre shock towers

Coming from Bezerk RC are new carbon fibre front and rear shock towers for the Team Associated B6.1 series of buggies. First up are the option rear towers for the B6.1 and B6.1D. With the laidback gearbox gaining popularity on track surfaces more in line with a standup gearbox, the trend among many B6.1 drivers is to shave the front of the rear arms and move them forward by up to 4mm. This modification creates a lot of sweep angle on the camber links which in turn can restrict the arm’s ability to wind up on power taking away grip. By relocating your camber link further forward to the tower this adds more forward traction. The B6.1 tower is a lower height variant of the B6.1D tower that is overall taller.

Continue reading here

November 24, 2019

Awesomatix A800MMX 1/10th electric touring car kit

Awesomatix have introduced their new A800MMX 1/10th scale mid motor electric touring car kit. Further pushing the standard within the industry, Awesomatix created the MMCX mid-motor platform back in 2018, previously only available as conversion kit, featuring a farther forward centre pulley, equal length belts, and a longer suspension arm design. These features also characterise the new MMX full car kit and yield significant performance enhancements for all types of racing surfaces and grip levels. The primary improvements are the motor mount and top deck design, which offers fully symmetrical flex and a multitude of flex possibilities. By using special ST019 top deck screws to secure the top decks to the motor mount, there are several flex settings and combinations possible from very stiff to very soft, from aggressive to calm, and even from “fixed” to “moving” action. Additionally, the two piece design provides increased stability and longevity of the top deck itself. To further improve on the flex characteristics of the car, the designers created the new AM08-3 shock holder for the front end of the car. This shock holder is no longer connected to the bulkheads and allows more caster flex, and thus a more rigid damper position. The newly designed motor mount remains in the centre of the car, but a new design moves the motor 0.5mm further inwards to improve the left/right balance with today’s modern lightweight batteries. This also further reduces the polar moment of inertia. In addition to the new AT120XB 20T alloy pulley, Awesomatix added an advanced ball bearing anti-skip unit into the motor mount, directly under the pulley, to reduce the risk of belt skip. New for the MMX kit is an update to the pulley securing bolt that has been changed to M2.5 size and will use a 1.5mm hex driver.

Continue reading here

November 23, 2019

Jeff Hamon is Nitro Top qualifier in China

With EP now over, attention turns back to Nitro, which will run through the rest of Saturday and all through Sunday. With the nitro action again taking place under flood lights it was the perfect conditions to set a fast time but drama in the fastest heat as the car of Meen Vejrak, who was on TQ pace, start to spew smoke out the rear of the bodyshell for about 2 laps before going off at the end of the straight and going on fire. A dragging battery cable seemingly the culprit but the car is completely destroyed from both the fire and the impact. This misfortune allowed Jeff Hamon to take over at the front and claim the TQ spot ahead of another Thai Maxima driver Charlee P, with top seed Kim Ki Heung in 3rd, Motor King in 4th and Meen Vejrak with his Q2 time giving him P5 for tomorrow’s 45 minute A-main. Jeff felt he had a slipping clutch throughout his run but said it stayed consistent for the entire run. Happy with a change he made to softer springs, he thinks for the final the car is easy to drive and apart from setting the clutch properly will work out strategy closer to the race time.

Continue reading this report here or view our complete event coverage here.

November 23, 2019

Axon Core high-performance ball bearings oils

Coming from Axon is their new line of high-quality Core ball bearing oils. The lubricants are available in three different viscosities, helping to get the most out of new or used ball bearings. First up is the medium viscosity oil, a full synthetic lube that offers best possible life span, pressure resistance and heat resistance, making it ideal especially for nitro racing cars. Next up is the low viscosity soft oil that also offers very good heat and wear resistance while allowing to achieve higher speeds due to its lower viscosity. High pressure resistance ensures smooth bearing operation even at high rotational speeds. Last but not last comes the ultra-low viscosity super soft oil that offers near water-like flowing capabilities, making it ideal for all ultra-high performance applications such as 1/12th and 1/10th formula racing. It needs to be used more frequently, however it helps to extract the best performance out of a bearing due to offering the lowest natural drag. All lubricants come in new leak-proof bottles for convenient storage and application.

Source: Axon [team-axon.com]

November 23, 2019

Coelho & Quek are SIGP Champions

Bruno Coelho has taken the overall win in the Modified class at the 2019 SIGP in Xiamen, China. The Xray driver took his 2nd win in A2 to complete the perfect weekend and claim the SIGP title and with it the 20,000 RMB prize money. Never really challenged in the deciding second A-main, it was Akio Sobue who took the runner up spot ahead of Dominic Quek and Meen Vejrak, but in A3 it was the Thai driver that took the win, as Coelho started from the back of the grid, with Akio finishing in 2nd, the result meaning that Vejrak would finish 2nd overall with Sobue completing the podium. Asked about the deciding A2, Coelho said it was a very similar race to A1 with the time spent waiting on the grid the only reason for concern forcing the World Champion to be quite cautious on the opening lap. Once up to speed he could pull a gap to Sobue and once control the race.

Continue reading this report here or view our complete event coverage here.