Red RC

October 30, 2019

RC Carbon Cavalieri D819 IBR rear shock tower

RC Carbon Cavalieri from Germany have introduced their new IBR rear carbon fibre shock tower for the HB Racing D819 and D817v2 buggies. Machined from high-quality aluminium the shock tower utilises three different wing mounting positions, allowing to mount the win in +7mm, +11mm and +15mm positions which allows to fine-tune overall downforce and car behaviour during jumping. It is understood that the shock geometry matches the standard shock tower.

Source: RC Carbon Cavalieri [carbon-cavalieri.com]

October 30, 2019

JConcepts NCTS Rd4 Midwest Carpet Nats – Report

The final round of the inaugural JConcepts NCTS was held at Thunder Road RC Raceway in Waite Park, Minnesota over the weekend. The popularity of carpet and turf racing is definitely on the rise and without any doubts whatsoever, racing on artificial surfaces is clean, consistent, and drivers always have a good amount of grip. As the NCTS season 1 comes to an end, the organisers are convinced that the carpet wave will carry strong into 2020 and beyond. For the season finale, the hype was high as many of the team drivers have been raving about the facility and they are completely right. The layout was actually very cool. It was a reflection of itself if you were to split it down the middle. With the jumps and features laid out in a manner that challenged drivers, it wasn’t an easy track to get around going 100 precent. However, cruise around at 80 percent, it was very easy. The double vertical chicanes haven’t been done in a while, but definitely, required precision and commitment to get the hot laps. The jumps were quite easy, which promoted close racing and many laps of battling on the track that ultimately made for a wonderful race experience. Overall, it was a fun layout that favoured cars with balanced setups that inspired confidence and control.

Continue reading the report here

October 30, 2019

Speedzone Evolution LiPo battery packs

Speedzone have announced their new Evolution brand, designed for and dedicated to competitive racing. Made to broaden Speedzone’s exposure in the competitive RC car racing scene, the first product offerings for the brand are 1S, 2S standard and shorty 130C LiPo packs. The 6000mAh 7.4V LCG pack measures 139x47x22.5mm and weighs 294g. The 5200mAh 7.4V shorty pack measures 96x47x25mm and weighs 228g, and the 8100mAh 3.7V pack measures 93x47x18.5mm and weighs in at 160g. All packs were designed to produce high voltage with low internal resistance and utilize 5mm bullet connectors.

View the shorty LiPo packs here

October 30, 2019

Balestri Top Seed at 1:8 World Championships

Dario Balestri has got the defence of his 1:8 Onroad World title off to a strong start by becoming the Top Seed for qualifying at Steel City RC Speedway in California. The Infinity driver capped off today’s seeding practice by posting the fastest time of the day in the fourth & final round with a considerable advantage over second fastest for the round Toni Gruber. Behind the Italian, Naoto Matsukura made it an Infinity 1-2 in seeding being the only other driver to top the time sheets when he went fastest in the third round. Having a tough day by his normal standards, Simon Kurzbuch would manage to complete seeding in the Top 3 but openly admitted the gap to his great rival Balestri was quite a big one. Having surprised with his second fastest time in the opening seeding round, JJ Wang is the 4th seed ahead of young Italian talent Jonathan Gandin with former Champion Tadahiko Sahashi completing the Top 6.

Continue reading this report here or view our complete event coverage here.

October 30, 2019

Matsukura fastest in 3rd round of seeding

Finally there was a change at the top of the timing sheets at the 1:8 World Championships as Naoto Matsukura set the pace in the third round of seeding. Having suffered a heavy crash in the previous round, the Infinity driver came back to set the fastest 3-consecutive laps of the day ahead of a much improved Simon Kurzbuch. Having been the benchmark up to now, Dario Balestri would set the third fastest time ahead of fellow Italian Alessio Mazzeo with Jesse Davis and Robert Pietsch completing the Top 6.

Continue reading this report here or view our complete event coverage here.

October 29, 2019

Balestri continues to set the pace at Worlds

Dario Balestri continues to set the pace at the 1:8 World Championships with the Infinity driver topping the second round of seeding practice at Steel City RC Speedway. Slightly slower track conditions saw Balestri go fastest over 3-consecutive laps as Japanese drivers came to the fore with Infinity team-mate Takaaki Shimo putting in the second fastest time ahead of Shoki Takahata and 2013 World Champion Tadahiko Sahashi. While Carmine Raiola had an improve run setting the fourth fastest time, for some of the expected title contenders it was a tough round. Simon Kurzbuch was only 28th as he struggled with his car traction rolling, a problem which also left Dominic Greiner uncompetitive for the round. Star of the last 1:8 Worlds, Naoto Matsukura had a spectacular exit from the round when his steering came off as he turned off the straight resulting in his car being firmly buried under the track barrier.

Continue reading this report here or view our complete event coverage here.

October 29, 2019

Balestri tops opening seeding round

Dario Balestri has picked up from where he left in free practice yesterday to go quickest in the opening round of seeding at the 1:8 Onroad World Championships in California this morning. The Infinity driver set his fastest three laps before getting caught out by the extra high morning traction with a roll that chunked at rear tyre and ended his run a minute & a half early. Behind the reigning Champion, JJ Wang surprised even himself with the second fastest time, the Mugen driver running in the heat before that of Balestri. Making a return to World Championship action after some time out from the sport, Steven Jovanovic was another surprise at the front of the times sheets as he posted the 3rd fastest time for the first of the 4 rounds of seeding practice. Next up it was Dominic Greiner in fourth place followed by Silvio Hachler and 2011 World Champion Robert Pietsch. For 2015 World Champion Simon Kurzbuch the extra traction caused him problems and his Shepherd made contact with the Steel City RC Speedway barriers leaving him 8th fastest.

Continue reading this report here or view our complete event coverage here.

October 29, 2019

Factory Team logo T-shirts

Associated Electrics have introduced their new Factory Team logo T-shirts. These white tees are an American-made blend of soft 100 percent cotton and available in six sizes of S to 3XL. The redesigned Factory Team logo is on the front, marking its wearer as a hop-up expert.

Source: Associated Electrics [associatedelectrics.com]