Red RC

October 7, 2019

Juan Carlos Canas doubles at Buggyland 6.0

The Buggyland 6.0 race was held this past weekend at the Circuito de Fuencarral in Madrid, Spain. SWorkz’s Juan Carlos Canas would dominate the event with wins in both the Nitro Buggy and Electric Buggy classes. In Nitro however it was Mugen’s Robert Batlle with the overall TQ from Kyosho’s Riccardo Berton and Juan Carlos Canas. The hour-long A-main then saw Robert dropping back the order in the opening stages while Juan Carlos Canas and Kyosho’s Joao Figueiredo battled for the lead, swapping positions several times. After the final pitstop Juan Carlos however was able to take over the lead and extend it to 2.4 seconds on the line, handing him the win from Juao in 2nd. Robert Batlle would complete the overall top 3 another 14 seconds behind.

Continue reading here

October 7, 2019

Elliott Boots sweeps 2019 Reds GP

The Ospy Team track in Gussago, Italy played host to the 2019 Reds GP this past weekend. SWorkz’s Elliott Boots was in control of things all weekend in the Nitro Buggy class as be brought home both the overall TQ and also the win in the 45-minute A-main final. Kyosho’s Mattia Polito came in a close 2nd from SWorkz’s Leonardo Valante who rounded out the top 3 podium result.

Continue reading here

October 7, 2019

RC Discharger Duo & Dual X6 regenerative discharger

RC Discharger have introduced their new “European” version of their iCharger Duo & Dual X6 regenerative discharger. The device allows to simultaneously discharge and charge two 1S to 4S batteries at 40A using the popular Duo or X6 chargers with the recovered discharge energy used for charging and without blocking the two charge outputs. The 3-D-printed case houses the discharger and also acts as a stand for a power supply and the charger and the discharger comes ready to use as a real plug-and-play with optimised wire length for optimised pit space use. Included with the European version comes a LiPo charging and storage bag but no charger.

View a list of the key features and more images here

October 5, 2019

Blitz EK9 190mm FWD touring car body shell

Coming from Blitz is their all-new EK9 190mmm touring car body shell for frontwheel-driven electric touring cars. Designed to not only is of a realistic look, the body also offers exceptional handling thanks to its two wings that provide both stability and downforce with the upper wing being adjustable in its size, allowing to fine-tune the overall downforce available. The body shell comes in 0.7mm standard or 0.5mm lightweight thickness and it includes 2-step window masks and a decal sheet for light and grille details.

View more images here

October 5, 2019

Avid X12 titanium ballstud kingpins

Coming from Avid and made for the Xray X12 series of 1/12th scale pan cars are new titanium ballstud kingpins. The parts, the brainchild of Jason Cheng, are made out of titanium and allow for new style front end setup on the Xray 12th scale. This conversion comes with two 0.5mm and 1.0mm roll centre shims and two e-clips but racer will need to tap their car’s steering block to handle the M4 thread and purchase two additional Xray 4.2mm ball cups (372662). The shim set is also available separately.

View more images here

October 5, 2019

WRC GTX aluminium clutch support disc

WRC Racing have introduced their new aluminium clutch support disc for the GTX 1/8th on-road kit. Machined from tough Swiss 7075-T6 aluminium the part is of a lightweight design for reduced rotational masses while the nickel coated surface ensures greater durability and high performance over a longer time.

Source: WRC Racing [wrc-racing.com]

October 4, 2019

Muchmore multi shock maintenance clamp

Muchmore have introduced their new multifunctional shock maintenance tool. The pliers grip different diameter 1/8th and 1/10th scale shock shafts and shock bodies for easier ball cup attachment and removal as well as easier upper and lower cap assembly. Also incorporated into the design is a pin that allows for easier pivot ball insertion and removal while machined 4mm and 5mm holes hold euro-style connectors during soldering. The tool is made of high-quality aluminium and it comes black anodised for wear and looks.

View more images here

October 4, 2019

Yeah Racing 4-Tec 2.0 aluminium optionals

Coming from Yeah Racing and made for the Traxxas 4-Tec 2.0 are several new aluminium optionals. First up is an aluminium motor mount that is a direct upgrade for the standard plastic item. The mount offers improved rigidity and better heat dissipation for longer gear and motor life. The part is machined from high-quality aluminium and it comes blue anodised and with laser-etched markings.

Continue reading here