Coming from Flash Point R/C is a new 1-piece wing button for the Mugen MBX8, Team Associated RC8B3.1, and Xray XB8. An alternative to the stock plastic two-piece wing buttons the part is manufactured in the U.S.A. from 3mm aluminium sheet, anodised black, and machined with the FP logo. It is lightweight, durable, and helps support the wing during hard impacts all while making wing mounting a little bit easier to to less parts being used.
Protoform have released a first teaser image of their forthcoming new body shell for the competitive 1/8th scale GT on-road classes. The Hyper-SS is supposed to be a “game changer” according to Protoform with with the teaser promising a low profile design that could assist handling for both nitro and electric-powered cars. Full details will become available soon.
Source: Protoform [racepf.com]
This past weekend was the first round of the hugely popular Worksop Series that once again had a full entry of drivers across the four classes of 2WD, 4WD, 2WD Stadium Truck and Vintage Buggy. As always it was round by round qualifying as the racing format, with the best two results from four rounds of qualifying counting towards the final position. Qualifying in 2WD saw a dominating performance by Neil Cragg, taking TQ in all of the four rounds to take pole position from Jonathan Skidmore and Richard Lowe. In 4WD it was a similar story with Neil Cragg taking TQ, ahead of Jonathan Skidmore and Tommy Hall who lined up 2nd and 3rd respectively. The 2WD stadium truck class saw Andy Wesson take pole ahead of Nick Gurnell and Lee Talbot. The Vintage classes had Rob Fox leading the way in 4WD and Paul Kemp in 2WD.
Continue reading the report here
GL Racing have introduced new optionals for their GLF-1 micro formula car in the form of a brass chassis and add-on brass chassis weights. Starting with the chassis, the main plate is machined from high-quality material and it weighs in at 31g, which adds weight to the lowest possible part of the car for improved handling in high-bite or bumpy track conditions. A black surface coating prevents the chassis from corroding while gold colour logos and edge details add visual impact. Also new are two brass balance weight sets that are usable with the standard carbon fibre or the above brass chassis. Two sets are available, one with a pair of 3.5g and 4g weights each and a set with four 2g weights. They can be simply attached using small screws.
The final round of the BRCA 1/10th IC & GT8 Nationals was held at Brooklands Raceway in Kent last weekend. Despite a poor weather forecast many drivers made the trip with points and final championship places up for grabs. Saturday was wet and rainy all day with only a few drivers venturing on to the track but most preparing wet cars for race day. No rain at driver’s briefing but a damp track made qualifying interesting. Round 1 of 200mm Touring saw Mark Green take TQ with 15 laps, Matthew Cook came in 2nd and Stewart Mcleod in 3rd. In 220mm TQ Devendra Mahatme scored 14 laps with Phil Edwards and Jamie Paton behind. GT8 Q1 TQ was Christopher Slater from Gareth Bell and Craig Woods.
Continue reading the report here
Coming from RC Maker are several new chassis weight options for the Awesomatix A800 touring car. First up are the Weight Shift LCG chassis weights for the front and the rear of the car. The weights help to adjust the feeling of the car as they feature three different mounting holes that allow to run them in an inner, middle or outer setting with the inward setting increasing the car’s response, offering less chassis roll while the outwards setting increases overall traction with more roll. In addition the weights can also be run at an asymmetric setting to fine-tune left-to-right weight balance. The sets also include carbon fibre shims for shimming the weight off the chassis to increase flex but the weights can also be screwed directly to the chassis without any shim to reduce flex. The Weight Shift sets are available separately for the front and the rear and they are usable with the Awesomatix A800X, EVO, MMCX, and MMX kits.
Exotek have announced the release of a new heavy duty aluminium front pivot for the TLR 22 series of 2WD buggies and trucks. The part was machined to be lighter of weight than the optional TLR alloy pivots and it retains the stock LRC geometry of the kit plastic pivots. The arm mount comes black anodised with silver chamfered accents that go great with stock plastic or factory alloy parts.
SWorkz have announced the addition of multi-time Danish National Champion, Pelle Culmsee to their team. The former HB Racing pilot will campaign SWorkz’s 1/8th nitro and electric platforms at both national and international events while also relying on Picco engines and TPro tyres. This is what Pelle has to say:
I am really looking forward to working with my mechanic Michael Marcussen together with the SWORKz factory team and the big Danish SWorkz team! I appreciate this new experience and the new challenge!
Source: MW RC Cars [mwrccars.at]
