Red RC » P Off Road

January 2, 2023

STRC Traxxas TRX-4M Brass Option Parts

ST Racing Concepts has released a range of brass option parts for the new Traxxas TRX-4M. These brass components helps with the performance of your TRX-4M by adding weight strategically at the lower portion of the vehicle, while increasing the durability of your TRX-4M as well. The brass Caster Blocks and Steering Knuckles features the stock geometry with bearing holes drilled after black coating for the most accurate and precise tolerance for the stock bronze bushing or if you upgrade to ball bearings. The Brass Hex Adapters features an +1mm off-set for a slightly wider stance on your TRX-4M and an increase in weight with disc weight behind the hex. The Brass Diff Cover not only adds more weight to the axle for stability, but also helps strength and align the internal gears inside the axle.

View individual parts here

December 31, 2022

Neumann to run ORCA electrics in 2023

ORCA has announced the signing of top off-road racer Jorn Neumann as a factory driver for 2023. The multiple European Champion will use the company’s electronics and motors in his new cars, announced on his new brand iminent following the announced of his Schumacher departure. Announcing the signing of the German, ORCA said, “ORCA RC is proud to announce our new factory Team Driver Jorn Neumann. Starting January 2023 Jorn would be using ORCA’s electronics and motors that would see him further develop and provide feed back and advice when on track. With Jorn’s involvement mainly in the off-road scene, ORCA hopes to be pushing more boundaries and more success in the off-road categories. See you all on track.” Neumann added, “I am very happy to join the Orca team. From 2023 I will be using Orca ESC and motors in my cars. I would like to thank Frankie and Michael from Orca. My first race will be the Köngener Indoor Masters next weekend.”

Source: ORCA [orcarc.com]

December 31, 2022

Avid HB Carbon Arm Inserts

Avid Racing has released carbon arm inserts for HB Racing’s D2 Evo2 1:10 Buggy and D8T/E8T Evo3 1:8 Truggy. The 1.5mm inserts offer another great tuning feature by reducing the flex and twist in the arm. A common setting is to run them just in the front or just the rear to dial in the feel of your buggy or truggy. The left and right inserts are interchangeable and come complete with stainless-steel installation screws.

View more images here

December 30, 2022

Schumacher Racing 2023 Apparel

Schumacher is gearing up for the new season with the addition of new apparel for 2023. The ‘Mono’ line includes a black hoodie and t-shirt with white Schumacher branding front and back as well as on the sleeve. The t-shirt is made with 100% certified organic cotton while the hoodie is made in an improved thicker 65% Cotton 35% Polyester material. Also added to the range is a fleece lined bobble hat. Ideal for the winter weather, it comes in grey with black embroidered branding to front and back.

View t-short and hat here

December 29, 2022

JConcepts Relapse 1:8 buggy & truck tyres

JConcepts has released the new Relapse tyre for both 1:8 Buggy and 1:8 Truggy. The Relapse is a tyre derived from research and development put into tires such as the Detox and Rehab. Those results were incorporated into a new design optimised for indoor and outdoor track success while delivering more forward bite than the original incarnations. The JConcepts speed laboratory started with the centre section of tread for more horizontal pin contact. The design revolves around the centre structure which has medium to small sized, dense lugs arranged in a stacked and horizontal configuration. The lugs have strategically placed cuts and grooves to allow flex in dust to perform when the track is in a deteriorating condition. The outer portion of the tread fits together like building blocks, with shapes placed together that nest well but also work together to flex laterally to provide steadfast side-bite. The tread tapers off cleanly to the outer sidewall giving a smooth transition during hard cornering.

View tyre features and more images here

December 29, 2022

JConcepts Monster Truck engine accessory set

JConcepts has added this engines accessory set to their range of Monster Truck offerings. Having a finely detailed vehicle is part of the enjoyment and allowing builders to build their favourite vehicles of today and yesteryear. The new engine accessory set contains a host of parts, pieces, and hardware to make dream creations a reality. The injection molded parts, designed by JConcepts, replicate carburetor and injection assemblies commonly used in high performance engines and seen on many of the monsters of the 1980’s, 1990’s, and 2000’s.

View more images here

December 28, 2022

Avid Motor Bearings & Ceramic Motor Bearings

Avid Racing has released an updated motor bearing lineup designed to improve performance and increase lifespan in RC motors. They use chrome steel rings that are polished to a mirror-like finish to reduce noise and vibration, and maintain a very tight ABEC7 tolerance to minimise play in the bearing. In the ceramic versions, they use silicone nitride ceramic balls (Si3N4) for a smooth, slippery surface. All the motor bearings also feature a nylon cage instead of metal, which prevents expansion under heat for improved performance. Additionally, Avis use high-speed oil for low-friction rotation and metal shields to reduce contact on the races and protect against debris.

Source: Avid [avidrc.com]

December 27, 2022

Vision Racing 22 5.0 Front Alu Camber Block w/ sway bar mount

Oregon’s Vision Racing has released a new Front Aluminium Camber Block w/ Sway bar Mount for TLR’s 22 5.0 1:10 2WD Buggy. The all in one front aluminium camber block for the TLR 22 5.0. Includes all 3 camber mounting holes. Incorporates the swaybar mount into it. The two vertical screws allow you to take out the up and down slop which is common with the smaller sized sway bars.

View more images here