Red RC

May 10, 2019

Coelho Top Qualifier at ETS Austria

Bruno Coelho is the Top Qualifier at the fourth round of the Yokomo Euro Touring Series in Austria, the Xray driver becoming the first double pole sitter of Season #12. After enduring a tough weekend at the first asphalt race of the ETS season in Madrid last month, the ETS Daun winner secured an important TQ on the championship’s first ever visit to the tight and technical ERC Wiener Neudorf track. Making the gamble to save new tyres for the last of the four qualifiers, Coelho duly delivered the fastest time of the day in Q4 helped too by the wind that caused drivers so much issues earlier in the day having dissipated for the late evening run. Having gone into the final qualifier with TQ runs from Q1 and 3, Ronald Volker tried to make the most of part run tyres, as a result of his Q2 errors, but it came to an end when he became the latest victim of the entry onto the straight and rolled his Yokomo. Taking a P2, also on new tyres Alexander Hagberg managed to move ahead of Marc Rheinard to secure third on the grid with Lucas Urbain completing the Top 5 starting positions for tomorrow’s finals.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Volker bounces back in Q3

After spinning out while on TQ run in the second round of qualifying, Ronald Volker bounced back to top Q3 at the Yokomo Euro Touring Series in Austria. The Yokomo driver produced the quickest run of the day so far, with a 0.289 of second advantage over the Xray of Alexander Hagberg with Q2 pace setter Bruno Coelho completing the Top 3 despite being on used tyres. Second fastest in each of the opening two qualifiers, Marc Rheinard was looking strong to go one better, but in a similar error to that of Coelho in Q1, he rolled coming onto the main straight on lap 12 of 17. The only driver to manage a 17-second lap for the round, with any chance of a result gone the Infinity driver pulled up. Volker’s second TQ run means only Coelho can deny him pole for Saturday’s finals with the Portuguese driver having the advantage of being on new tyres while Volker will be on used.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Coelho tops Q2 from Rheinard

Having rolled out of contention for a TQ run in the opening qualifier at the ETS in Austria, Bruno Coelho has delivered an error free TQ performance on his second attempt. The Xray driver topped the times by 4/10ths from Marc Rheinard, the Q2 pace 3/10ths slower than the opening time set by Ronald Volker. Again leading away the field, Volker looked to be on target for 2 out of 2 as he pulled clear in the early laps but on his fifth lap he spun out in the chicane and spinning again on the following lap the Yokomo driver decided to pull off. This promoted Rheinard to the top of the timing screens but ultimately two bad laps from the Infinity driver was enough to allow Coelho to come out on top. Behind, Lucas Urbain backed up his P5 in Q1 with an impressive drive to claim 3rd ahead of Yannic Prümper, Akio Sobue and Freddy Südhoff.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Volker takes opening qualifier at ETS

Ronald Volker has taken the opening round of qualifying at the fourth round of the Yokomo Euro Touring Series in Austria. With the Championship making its first trip to the technical ERC Wiener Neudorf track, Volker maintained his practice form in the difficult conditions to top the times ahead of No.2 seed Marc Rheinard. With a roll coming onto the main straight eliminating reigning Champion Bruno Coelho from the TQ hunt, it was Xray team-mate Alexander Hagberg who completed the Top 3 ahead of Akio Sobue, Lucas Urbain and Yannic Prumper. Describing the track during practice as ‘the most difficult track I’ve been to so far’, ETS Madrid winner Freddy Sudhoff had an error fill Q1 which left the Awesomatix driver 10th behind Coelho. With bad weather showing in the Vienna area for Sunday, it is going to be a busy Friday for drivers with the schedule being brought forward to run all four rounds of qualifying today to hopefully allow enough time to run all triple finals tomorrow.

Continue reading this report here or view our complete event coverage here.

May 10, 2019

Xray XT8 1/8th nitro truggy kit

Xray have introduced their new XT8 1/8th nitro truggy kit. The kit builds on the proven XT8 platform but features refinements in the suspension and chassis area. First up is the new front suspension geometry with updated C-hubs and steering blocks. The latter are of an new design with interchangeable Ackermann plates and moulded-in threaded bushings for the kingpin screws. New to the “2019” model are also updated C-hubs to accommodate the updated steering blocks as well as CV-design driveshafts front and rear to replace the previous universal-type shafts. The chassis was updated to work with the included “soft” radio tray which is the best solution for low to medium bite track while an optional hard radio tray is available when running on high bite surfaces or in high ambient temperatures. For the rear of the truck, Xray have included a new lightweight 1-piece wing mount that is about 40 percent lighter for a lower centre of gravity and optimised overall weight balance. A new wing mount brace helps to prevent gearbox breakage as it connects the wing mount and chassis braces that help to transfer impact energy towards the chassis. Also part of the kit is an updated 7075 alloy shock rear shock tower to accommodate the new rear wing mount, updated rear uprights with larger outer bearings make for improved reliability and upgraded shock absorbers with soft compound bottom-ribbed volume compensator membranes help with suspension efficiency. The kit is rounded out by new aluminium clutch shoes as well as 2.6mm front and 2.8mm rear swaybars.

View a list of the new features here

May 10, 2019

Bittydesign FWD body shell – Coming soon

Bittydesign have released a first teaser image of their forthcoming new body shell for growing 1/10th FWD touring car class. Full details and more images will become available in time for the release which is scheduled for June.

Source: Bittydesign [bittydesign.net]

May 10, 2019

Xray GTX8 4-shoe clutch set

Coming from Xray and made for their GTX8 1/8th scale nitro GT kit is a 4-shoe clutch set. The design makes for improved throttle feel and engine response and it allows for super-easy clutch setting, ranging from soft to hard settings, ensuring optimised performance on different track conditions and with different driving styles. The 4-shoe clutch also features smaller, lighter internal parts, and the design allows for more balanced clutch bell engagement compared to the traditional 3-shoe design. The clutch setting can be tuned with the adjustment nut to control the engagement point as desired. The complete set includes the flywheel, graphite clutch shoes, a medium hardness clutch spring, assembly screws, flywheel collar, flywheel nut and pressure sleeve.

Source: Xray [teamxray.com]

May 10, 2019

Muchmore MRX482 Sanwa-compatible receiver

Muchmore are busy adding more radio equipment to their line up with the latest being the Sanwa-compatible MRX482 2.4GHz receiver. The compact design “antenna-less” receiver unit measures 23.6×18.4×28.4mm and it weighs in at 7.3g. The 4-channel receiver is Sanwa Normal, SHR and SSR mode compatible and it is usable with 3.5V to 8.4V input.

Source: Muchmore [muchmoreracing.net]