Red RC

April 10, 2019

Team Associated B74 Team Kit 4WD buggy

Following a couple of prototype images, Team Associated have introduced their all-new B74 1/10th scale 4WD buggy kit. The off-road RC car racing scene has taken a turn over the past couple years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated’s Area 51 were quick to address this trend in the 4WD class with the RC10B74 Team Kit. This completely new chassis design, equipped with a long list of features, is designed to give you the winning edge. Competition levels are more extreme than ever, with several manufacturers producing competitive racing platforms. The RC10B74 was designed with focus on performance and durability. New features like the easy-access, quick-change differential height make tuning for different track surfaces and ride heights quicker than ever. 7075-T6 aluminum bulkheads and arm mounts provide precision and durability, while the updated shocks with increased stroke length allow for more consistent jumping and landing. Also included, an all new rear hub assembly with a modular vertical ball stud mount and axle height insert system to allow the finest roll center adjustments possible. With many other new features, the RC10B74 Team Kit gives you all the performance and adjustability necessary to keep you racing at the front of the pack.

View a list of the features and more images here

April 9, 2019

Arie Manten wins at Dutch IC Track Nats Rd1

The Dutch NK 1/8th On-road Nationals kicked off at the fast and scrubby circuit in Rucphen at the MAC Banbrekers club. It was unclear whether some of the usual suspects would show up or not. John Ermen and team-bud Robbin Hertong went off to France which increased the chances of various drivers on an early season victory. Young Jesse Keller took up the challenge against some of the old dogs and proofed to be able the withstand the pressure with a nice pole. As the race unfolded one car after the other ran into a number of problems. While Jesse raced to an early lead he soon had to retire as he trusted his old 451 receiver just one race too many. With Roy Bakker, Arie Manten and Ben Jamini as well as Benny Ciere and Joey Sorber moving up the ranks, Martin Zevenhoven was faced with a rare main bearing failure on his normally trustworthy O.S. engine. After several flame outs he thought “enough is enough” and decided to enjoy the sun while watching the upcoming showdown.

Continue reading the report here

April 9, 2019

Ronnefalk doubles at HB Racing European Race Days

The 2019 HB Racing European Race Days were held this past weekend at the ARCF42 track near Lyon, France. The event saw the attendance of world class drivers such as David Ronnefalk and Cole Ogden that not only competed but also gave help to racers. Other celebrities included Philippe Neidhart and Didier Boulmier as well as Nano and Jean-Marc Betticher. The track layout was amazing but very challenging even for the international drivers while the weather forecast was quite gloomy but the rain only fell on Sunday for a few minutes. In the Nitro buggy class, the race format was three 15-minute finals. The finals were a 3-horse battle between David, Cole and Hampus Berg. Cole won the opening final as David made a big mistake in the chicane and had to retire with a few minutes to go. After his DNF in A1, David was in control of things and he was able to win the last two finals and secured the overall victory. Cole came in 2nd and Hampus finished in 3rd. Over in the E-Buggy class it was Cole Ogden with the overall TQ, however after the four A-main events it was David with his second win this weekend from Cole 2nd and Hampus 3rd.

View the E-Buggy podium here

April 9, 2019

CJ Jelin wins at SoCal Shootout

The Pro-Line track in Banning, California played host to the 2019 SoCal Shootout recently. Xray’s Kyle Turner took the TQ in the 1/8th E-Buggy class and he would battle with Kyosho’s CJ Jelin for the win, but a wrong tyre compound choice, an off-setup left and a couple of mistakes meant he had to let CJ go for the win with Kyle coming in 2nd. TLR’s Dylan Nelson came in 3rd to round out the podium.

Source: Xray [teamxray.com]

April 9, 2019

X-Grip multi-functional pliers

European X-Grip distributors Mikimodel have introduced new multi-functional pliers that are ideal for nearly all scales of RC cars. Machined from 7075 aluminium and coming black anodised for wear and durability, the tool can be used to hold shock shafts while attaching ball cups, it allows to measure screw lengths, indicate screw or wire diameters, mount balls and ball cups and many more.

Source: Mikimodel [mikimodel.net]

April 9, 2019

Ty Tessmann doubles at Big Barn Shootout

The 2019 Big Barn Shootout was held in Chilliwack, BC this past weekend. The track was very large, fast and a challenging layout. This year the event had a lot more entries which made for longer days and stiffer competition, with drivers coming from as far as Ontario and the North western United States as well as western Canada. The higher numbers made the track surface different from last year, it started out smooth and low grip, as the weekend went along the grip came up and the track started to develop some holes and ruts, which made the main events more challenging. Official practice started at 11am on Friday and went until 10pm, this was limited to five practice sessions per class entered and was regulated by punch cards. Saturday was three round of qualifying and it was Xray’s Ty Tessmann who was able to take the TQ in both classes.

Continue reading here

April 9, 2019

Axial Yeti Jr. alloy & steel optionals

Axial have introduced a range of aluminium and steel option parts for their Yeti Jr. off-road vehicle. The alloy parts include steering knuckles, C-hub carriers, a steering rack set, rear axle shafts, as well as rear axle lockers. All are made of high-quality 6061 aluminium and they come hard-anodised for improved wear and looks. Laser-etched Axial logos make the parts stand out. As for the steel items, Axial rolls out 48.5mm front axle shafts as well as a rear driveline. The shafts are machined from durable steel and they come with a hard surface finish for durability. All of the above parts are direct replacements for the standard items and they add strength, precision and last but not least visual impact.

View the other new parts here

April 9, 2019

XRS Alpe Adria Rd1 – Report

The first round of this year’s XRS Alpe Adria was held in Tolmin recently. The race was held in the three classes of Touring Modified, Touring 13.5 XRS and 1/8th Nitro On-road. The weekend kicked off with practice on Saturday with Sunday being race day with two timed rounds of practice as well as four qualifiers for the electric classes and three rounds of qualifying for IC Track. In Touring Stock it was Patrik Pozgaj with the TQ while in Touring Modified Alojzij Osvald came out fastest. 1/8 IC Track saw Nejc Mihelic taking the overall TQ after switching chassis brands during the off season.

Continue reading the report here