September 17, 2018

Drake & Bornhorst win at Southern Indoor Nationals

The 2018 Southern Indoor Nationals were held in West Monroe, Luisiana this past weekend. The event was held in several 1/8th Nitro and Electric as well as a single 1/10th Open SCT class and in Pro Nitro Buggy it was Mugen’s Cole Ogden with the TQ from Tekno RC’s Ryan Lutz. Pro Nitro Truggy was TQ’s by Tekno’s Ryan Lutz with teammate, Joe Bornhorst in 2nd. Over in Pro Electric Buggy the top 2 again were taken by Ryan Lutz and Joe Bornhorst. Onto the finals and in Pro Nitro Buggy it was Mugen’s Adam Drake with the win in the 45-minute main final, some 5.6s in front of Joe Bornhorst while TQ Cole Ogden had to settle for 3rd overall, a lap down.

Continue reading the report here


September 17, 2018

Sebastian Winterstein wins at Bavarian Champs

The Bavarian Championship was held at the Buggy Club Mitterkreith this past weekend. In the 1/8th Nitro Buggy class it was Mugen’s Sebastian Winterstein with the win from SWorkz driver Tim Kraus in 2nd and HB Racing’s Guido Erler in 3rd.

Source: Mugen [mugen.eu]


September 17, 2018

Hoppe & Kröger win at German 1/8th IC Track Nats

This past weekend the German 1/8th IC Track Nationals were held at the Minidrom Ettlingen track in the South of the country. The crowd saw an exciting Class 1 final as it was a close battle for the victory between Lars Hoppe and Oliver Mack from the beginning of the race. Due to different fuel and tyre strategies the lead swapped numerous time during the final. Lars opted to change only the outside tyres at the third pitstop while Oliver changed all four tyres about mid-race. Before the final round of pitstops Oliver took over the lead with fresher tyres but Lars stayed behind closely. Lars entered the pits for his last stop first and a super fast pitstop of Thilo Tödtmann put some pressure on team Mack. A few laps later Oliver had his last pitstop and he returned to the track just behind Lars. For the final laps the distance was only a few meters but Lars put his head down and crossed the finishing line in first position to take his maiden German Championship title with Oliver Mack coming in 2nd and Merlin Depta rounding out the podium. In the Class 2 it was young David Kröger with a great drive in the final after winning the semi-final with a gap of four laps over the rest of the field. A small mistake in the first lap of the main final dropped him to the last position but for the rest of the race he showed a flawless performance. A few minutes before the end of the race David took over the lead and never looked back to take the German Championship title Class 2 as well as the Junior Champion title.

Source: Shepherd [team-shepherd.com]


September 17, 2018

Novotny trifecta at Czech 1/10th Off-road Nats

The 4th round of Czech 1/10th Electric Off-road Nationals took place at the challenging astro turf track in Usti nad Labem. In 2WD Buggy it was Kaja Novotny who TQ’d all three rounds of the mixed wet and dry qualifying. In the finals, Kaja would take tone-to-tone wins to take the day’s win from Marek Schiller 2nd and Ales Bidovsky 3rd.

Continue reading the report here


September 17, 2018

Xray Racing Series Australia – Report

The Xray Racing Series Australia was held at Williamtown recently with this being the second attempt of the race due to the first date being rained out. Touring Modified would see Jeffrey Mackie take the TQ from John Puse and Lionel Saunders. A1 would see close clean racing between all drivers with Jeff taking the win by four seconds from John with Ed a further seven seconds back. A2 would again see good clean racing on the smallish and tight track. With Jeff again taking the win by five seconds from John with Ed two seconds back. A3 would see John taking the win by ten seconds from Lionel with Jeffrey only 0.4s away so overall it was Jeffery from John and Lionel.

Continue reading the report here


September 17, 2018

Losi 5ive-T 2.0 1/5th scale 4WD short course truck

Coming soon from Losi is their new 5ive-T 2.0 1/5th scale 4WD short course truck. The gas-powered truck has all of the unrivalled performance of its predecessor and includes Bind-N-Drive technology allowing owners to pick the transmitter that best fits their driving style. The powerful Zenoah G320 32cc engine has been built specifically for the 5IVE-T 2.0. The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, upgraded brakes, and hard anodised bleeder caps and shock bodies for improved shock performance. The truck is available in grey/blue/white or grey/orange/white livery from November.

View a list of the features and more images here


September 17, 2018

Exotek release new LST 3XL optionals

Exotek have released a host of new option parts for the Losi LST 3XL monster truck. The range includes new aluminium suspension parts such as front steering blocks, C-hubs and rear hubs all of which add precision and stability. The items are machined from high-quality aluminium and they are available in either blue or gun metal anodising. Also new are front and rear 2.5mm carbon fibre top plates as well as a 5mm carbon fibre LiPo battery strap. The items are direct replacements for the standard parts and they add visual impact for a cool racing look.

View the other new parts here


September 17, 2018

Yeah Racing 1/16 E-Revo HD driveshafts

Coming from Yeah Racing and made for the Traxxas 1/16 E-Revo and Summit trucks are HD tool steel universal driveshafts. The heavy duty items will greatly improve overall durability as they add maximum strength to the driveline. The driveshafts come in sets of two and they can be used either on the front or the rear of the truck.

Source: Yeah Racing [yeahracing.com]