Red RC

December 5, 2018

Tamiya hi-grade alloy screws & TC wing mount washers

Tamiya have introduced their new hi-grade aluminium screw sets as well as two touring car wing mount washer kits. Starting with the screws, all are machined from high-quality aluminium for a low weight and exceptional durability with the button head variants offering a conical head design for improved looks. The blue anodised fasteners are available as five piece sets and they come in 3x6mm button head, 3x8mm button head, 3x6mm countersunk and 3x8mm countersunk specification.

Continue reading here

December 5, 2018

Yeah Racing SCX10 II stainless steel centre driveshafts

Made for the Axial SCX10 II trail truck are new stainless steel centre driveshaft sets from Yeah Racing. The sturdy metal assemblies are best used with high-powered brushless drive systems as they offer a lot more stability and durability, all while also adding to the overall weight of the truck. The sets include a front and rear centre driveshaft and they are available in red or black colour.

View the black driveshafts here

December 5, 2018

T-Works T4 & BD9 anti-tweak block

T-Works have introduced a new 18mm/19mm anti-tweak block for the Xray T4 and Yokomo BD9 touring cars. Machined from aluminium and coming red, black or orange anodised the blocks help to build tweak-free front and rear bulkhead assemblies. With the lower bulkhead screws not fully tightened the block are inserted between the left and right bulkhead and while pressing the bulkhead halves against the block the screws will be tightened to ensure a fully parallel assembly that both counters uneven chassis tweak while ensuring less stress for the spool and differential bearings.

View the colour variants here

December 5, 2018

Exotek D418 centre spool kit

Exotek have released an ultra lightweight centre spool conversion set for the HB Racing D418 buggy. Using the kit reduces the drivetrain’s rotating mass for that extra boost in 13.5T and 17.5T spec racing as the completed spool set weighs only 23g with the spur gear. A machined 69T POM spur gear is included and bolts on to the lightweight alloy spool. The spool housing is also compatible with Exotek 66T, 69T and 72T Flite spur gears or standard 48p Kimbrough gears. The set requires the use of the stock diff cups, bearings, steel pins and large O-rings form the D418 centre diff.

View more images here

December 5, 2018

RC Kongen Winterseries Rd3 – Report

The third round of the RC Kongen Winterseries was held at the RC Kongen indoor track in Sonderso, Denmark recently. The popular event is constantly growing with the third round having attracted 50 entries for the four classes of 2WD Mod Buggy, 4WD Mod Buggy, 13.5T Stock Buggy and Mod Racing Truck. The race was held at RC Kongen’s EOS carpet track and the layout offered a good mix of open and tight corners along with a wall of death and some nice jumps. With drives from all over the country, as well as a handful of pilots from Germany, 4WD Mod Buggy is the biggest class. Marcus Kaerup is one of the best 4WD drivers in Denmark, despite his young age and his main competitor would be Pelle Culmsee. He is one of Europe’s best 1/8th scale nitro racers and is currently under contract with Hot Bodies Racing. Those two had a race of their own in qualifying. Marcus won two rounds and would start from pole, after setting a new fastest lap of 15.1s, and he also was the first ever to score 20 laps in 5 minutes. Quite a few Germans also made their entry, most of them competing in the 4WD class. They were very fast, and the best of them was Melina Ratzlaff, a 17-year-old girl. She almost made the A-main with her well-prepared Xray.

Continue reading the report here

December 5, 2018

MIP Bandit X-Duty CVD driveshaft kit

MIP have announced the release of their new X-Duty CVD driveshaft kit for the Traxxas Bandit. The steel construction is of a splined design, offers 12mm keyed hex standard wheel adapters and it is rebuildable to replace any worn or damaged parts. Due to being much stronger than the standard parts the X-Duty kit is ideal for the new no-prep drag racing class and form maximum efficiency it is best used with ball-raced Traxxas rear hubs.

Source: MIP [miponline.com]

December 5, 2018

Samix SCX10 II brass rear bumper mount

Coming from Samix and made for the Axial SCX10 II trail truck is a brass rear bumper mount. The item is machined from high-quality brass material and it comes with a black surface coating to prevent corrosion while the machined edge details add visual impact as does the gold-coloured Samix logo. The mount adds 101g of weight to the rear end of the chassis while increasing strength, rigidity and durability.

View another image here

December 5, 2018

JConcepts 2005 Ford F-250 Super Duty MT body

JConcepts have introduced their new 2005 Ford F-250 Super Duty MT body for solid axle monster trucks. JConcepts started with a popular wheelbase in the MT community and designed it around the popular race trucks on the circuit. The monster trucks have gigantic tires and the 2005 Ford F-250 takes this into consideration with large openings positioned like the monsters from this generation. The design of the flares and wheel wells allow versatility in a segment that has a wide range of set-ups chassis designs and most importantly, wheelbase. Decal design is a constant focus and with all JConcepts bodies, a quality sheet is included with grille, headlight and taillight layout. The body is 7” wide and offers a 12.5” wheelbase, fitting a variety of platforms inclining solid axle race trucks.

View more images here