Red RC

June 28, 2018

Sunpadow Graphene LiPo battery packs

Coming from Sunpadow are their new Graphene LiPo battery packs. The competition-grade packs are available in different specifications such as a 8400mAh 7.4V standard size pack that weighs in at 324g. Also new is the 8200mAh 3.7V 1S pack for modified 1/12th scale racing. The 18.5mm height pack weighs in at 162g. Also a 1S pack is the slightly lighter 6300mAh 18.5mm battery with a weight of 152g. Last but not last is the lightweight 3800mAh 2S 7.4V shorty with a height of 18.5mm an a weight of 160g. The low centre of gravity battery is ideal for 1/10th scale off-road buggies that are run on carpet or high-grip astro turf. All packs come in protective yet decorative boxes for easy and secure storage and transportation.

Source: Sunpadow [sunpadow.com]

June 27, 2018

JConcepts XB4 chassis protective sheet

Coming from JConcepts and made for the Xray XB4 series buggies is a pre-cut chassis protective sheet from JConcepts. It is providing a smooth and slick surface to decrease friction between the chassis and dirt surfaces. The pre-cut and graphically pleasing chassis protective sheet comes as 2-piece set with the durable and resilient material fitting the chassis layout like a glove and adds protection and style in one easy package.

Source: JConcepts [jconcepts.net]

June 27, 2018

Fantom Facts Machine 3S BL motor testing tool

Fantom Racing have introduced their latest motor testing tool, the Facts Machine 3S precision resistance and inductance meter. The device allows to test both the resistance and inductance of brushless motors, information that is critical to estimate the performance capability of brushless motors. The general rule of thumb is the combination of the lowest resistance and highest inductance produces the highest performance for RC motors, and the difference between these two numbers we call the “spread”. Typically, the bigger the spread, the better the motor will perform. The motor tester is not mass produced, but rather is hand-built one at a time, in the U.S.A., to the highest standards in the R/C industry. The Facts Machine 3S calibration is double checked for the highest accuracy possible, using five percent tolerance resistors and inductors. The compact device comes in a sturdy, foam padded storage box and it is available now.

View a list of the features here

June 27, 2018

RC Concept MC5 World nitro off-road engine

RC Concept have introduced their new MC5 World nitro off-road engine to celebrate the forthcoming 2018 IFMAR Nitro Buggy World Championship. The engine features a new Avid ceramic front bearing that promises better sealing and a more precise crankshaft guiding for overall increased engine efficiency. In addition the bearing will reduce piston and sleeve wear while offering quicker spool up and up to 30 seconds of additional runtime per tank. A newly designed heatsink graphic rounds out the package.

Source: RC Concept [rcconcept.net]

June 27, 2018

Tamiya Toyota Gazoo Racing WRT body set

Coming soon from Tamiya is the Toyota Gazoo Racing WRT body set for 257mm wheelbase cars. The lid will fit most 190mm 4WD and 2WD on-road chassis and it will be supplied with a detailed decal sheet and accessories such as front splitters, mirrors and a moulded rear wing.

Source: Tamiya [tamiya.com]

June 27, 2018

HB Racing D418 4WD buggy kit

Following a couple of teaser images released back in April, HB Racing has now officially introduced the new D418 1/10th 4WD buggy kit. The Torrance Deguzman designed D418 builds on the success of the D413, adding features optimised for the new breed of high grip racetracks around the world. New is an aluminium chassis with raised side guards, similar to the successful 1/8th D817 buggy. The aluminium chassis adds durability, lowers the centre of gravity, dissipates motor heat, and helps dampen high frequency vibration. New moulded nylon side guards help keep out dirt, and the side plates are now used to mount the body, eliminating the need for body posts and body pins. The chassis layout has been refined, taking cues from the successful E817 buggy, The D418 is optimised for the latest rules and LiPo and brushless equipment.

Continue reading here

June 27, 2018

Schumacher US GP 2018 – Announcement

The 2018 Schumacher US GP will be held on the weekend of the 12th of August at RC Madness in Enfield, Connecticut. The event sees the running of a variety of classes including 2WD Mod Buggy, 4WD Mod Buggy, Open Stadium Truck, 4WD 13.5T Buggy, 2WD 17.5T Expert and more. Schumacher spec tyres will be used in all classes and Schumacher’s Michal Orlowski already made his entry, giving the race an international touch. More information can be found on social media here.

June 27, 2018

Kevin Zwahlen doubles at Swiss E-Buggy Nats

Round 3 and 4 of the Swiss 1/8th scale E-Buggy National Championship was held at the Neuchatel Mini Buggy Club last weekend. HB Racing’s Kevin Zwahlen was in control of things all weekend long as he not only took the TQs for Saturday’s round 3 and Sunday’s round 4 but he also came out on top on both days, taking wins in front of the Xray duo of Robin Frischkopf and Romeo Grass who rounded out the Rd3 and Rd4 podium.

Image: Neuchatel Mini Buggy Club [nmbc.ch]