Red RC

May 31, 2018

Race Opt MTC1 4WD mini conversion set

Race Opt have released first images of their 4WD mini conversion kit for the Mugen MTC1 touring car. It is understood that the set will include all needed parts to convert Mugen’s 1/10th electric tourer into a competition-grade M-type 4WD car and thus the set will utilise a new carbon fibre main chassis and top deck, new carbon fibre shock towers and also updated, narrow track width suspension parts. The conversion is currently shipping and full information about the specifications and features should become available soon.

View more images here

May 31, 2018

Exotek B6.1 & XB2 CF LiPo holder sets

Coming from Exotek are new carbon fibre LiPo tabs and cups battery mounts for the Team Associated B6.1 and Xray XB2 series of vehicles. Both were specifically designed to allow quickly adjustable weight tuning while providing more natural chassis flex due to the “floating” battery mount with only two tabs touching the battery instead of a whole brace spanning from side to side. The sets are made of carbon fibre, the AE set scrubbing about 4.5g of weight while the Xray set is about 4g higher than stock and both include all needed hardware. The B6.1 set is usable for all B6.1-based kits such as the B6.1, T6.1 and SC6.1 as well as the older spec B6, while the Xray mounts can be used with all XB2 and XT2 series kits, however it is understood that JConcepts buggy bodies for the XB2 do not provide enough clearance for the tabs.

View more images here

May 31, 2018

Shepherd Velox V8 low-friction drive belts

Shepherd have announced the release of their new low-friction drive belts for the Velox V8 1/8th on-road kits. Available as 210mm front, 435mm centre, and 201mm rear belt, the parts will significantly lower the drivetrain drag for improved acceleration, top speed and mileage. The super-soft belts are available from now on.

Source: Shepherd [team-shepherd.com]

May 30, 2018

Danish Electric Off-road Championship Rd2 – Report

The small and bumpy Black Hill RC track in Hobro hosted round 2 of the Danish Electric Off-road Nationals recently. In the 2WD qualifiers Jesper Rasmussen was on fire right from the start as he was one of the few drivers that delivered a mistake-free run. In Q2 Jesper took again the TQ without any mistakes in front of M. Kaerup. In Q3 Jesper was on TQ pace again but rolled it, allowing Frederik Hovgaard in front but in the end Jesper’s pace was a bit faster and he ultimately also took round 3.

Continue reading the report here

May 30, 2018

2018 Lonestar Nitro Challenge – Report

This past weekend was the 2018 Lonestar Nitro Challenge at Thornhill Raceway put on by Joey Christiansen and directed by Jimmy Babcock. The three day event was pretty standard with Friday practice, Saturday qualifying, and Sunday mains plus the always popular horseshoe tournament. As far as the racing went, Team Associated’s Jake Dellinger would take the TQ honors in Pro Buggy and Pro E-Buggy with Dillon Caldwell taking TQ in Pro Truggy. In Pro Buggy Jake Dellinger and Dillon Caldwell would break away from the field early with Tekno’s Tyler Hooks not far behind, but with Tyler having a DNF early on, the race for 3rd was seemingly Team Associated’s Austin Jeffries until Xray’s Ethan Lefebvre mounted a late race charge to take over the spot. Jake Delligner would come out victorious after a lengthy battle with Caldwell which ended in a flame out for the HB Racing privateer, Caldwell would rebound to finish 2nd.

Continue reading the report here

May 30, 2018

Tekno EB410 front & rear swaybar sets

Tekno RC have announced two new swaybar sets for the EB410 1/10th scale 4WD buggy. They make it easier to fine-tune the setup depending on the traction level, from loamy low traction surfaces to high grip carpet. The front set includes wires thicker than those found in TKR6623 and are best used on higher grip surfaces such as carpet or blue grooved clay. They provide a great tuning option to reduce steering sensitivity and prevent traction rolling on high bite surfaces. Included are five 1.5mm to 1.9mm wires. The rear set includes thinner-than-stock swaybars, making them a useful option for low grip surfaces. They will help generate additional rear traction and can also aid in stabilising the rear suspension on very bumpy surfaces. Included are five 1.0mm to 1.4mm wires.

View the rear swaybar set here

May 30, 2018

Perez & Moreno win at Spanish Electric On-road Nats Rd1

Round 1 of the Spanish Electric On-road Nationals was held last weekend and in the Touring Modified class, Xray’s David Perez went home with the overall TQ and win. Echarri Santiago Carles (Mugen) came in 2nd from VBC Racing driver, Mateo Rodriguez Antonio in 3rd. In the Stock class, it was Luis Moreno Eugenio (Xray) who took the win in both A1 and A2, which gave him the overall win from Eres Ramos Vicente 2nd and Xray driver, Yeray Martinez 3rd.

View the Stock class podium here

May 30, 2018

Norwegian National Series Rd1 – Report

The opening round of the Norwegian National Series was held at the Kodal Raceway in Sandefjord on an entertaining track that offered both fast and technical bits in addition to a bumpy surface and a somewhat low grip level. On Saturday the 1/10th 200mm Nitro Touring class was run with the race format seeing three round of qualifying followed by the Superpole, semis and 45-minute A-main final. Oskar Fjeld would dominate the qualifying to secure the TQ for the main final with his old spec Xray while Andrè Røine would go on to win the superpole with his newer spec NT1.

Continue reading the report here