Red RC

May 11, 2018

Tekno introduce new EB410 optionals

Coming from Tekno for their EB410 1/10th scale 4WD buggy are new universal driveshafts as well as an updated rear shock tower. Starting with the driveshafts, the assemblies are CNC machined from high-quality steel alloy and black oxidised for wear resistance. Extreme working angles are no problem and they are also lightweight as the excess material has been removed without compromising performance or strength. Universal driveshafts excel in rough conditions and can generate additional side bite by providing additional roll in the corners. The suspension is allowed to work more efficiently when compared to the additional mechanical binding in CVAs. This allows the vehicle to absorb bumps better with a reduced risk of “catching a rut” and flipping the car while cornering. For smoother tracks, CVA’s will produce more forward traction and support, but universals are also well suited with slight suspension setup changes such as springs and oil. The basic design of a universal driveshaft means virtually no maintenance is required and dirt and dust won’t foul the operation of the joint. These are ready to drop into the EB410 with the use of additional 8x14x4mm bearings.

Continue reading here

May 11, 2018

Rheinard top seed on ETS’ Andernach return

With a winning rate of 75% over the four years Motodrom Andernach previously hosted the Yokomo Euro Touring Series, Marc Rheinard has picked up where he left off in 2011 to top seeding on the track return to the championship. The German, for whom the town of Andernach is home, would lead an Infinity 1-2 from team-mate Naoto Matsukura with a very closely matched Top 12 covered by less than a second. A tight & technical track layout, something that is quite different to the outdoor tracks on the championship’s calendar of the past few seasons, the track’s challenge was made even greater due to yesterday’s practice being hit with rain. With further rain forecast for Sunday, organisers are now running to a condensed timetable to get the race done by tomorrow night. The change means today’s action started with 1 round of untimed practice followed by two timed seeding runs and that lack of running appears to have championship leader Bruno Coelho playing catch-up with him 6th in seeding albeit one place ahead of Ronald Volker who has been here before.

Continue reading this report here or view our complete event coverage here.

May 11, 2018

Capricorn C03 steel gear differential

Coming from Capricorn and made for the C03 1/10th nitro on-road car is a steel gear differential. With the new lightened internal metal gears the diff is more durable and provides a slightly different handling characteristic compared to the standard components.

Source: Capricorn [capricornrc.com]

May 11, 2018

HPI Racing 28C & 36A Challenge-legal touring car tyres

HPI Racing have introduced their new HPI Challenge legal 28C carpet and 36A asphalt touring car tyres. Both use 0mm offset 24mm hard dish rims and the specific rubber compounds ensure long durability and exceptional traction. High-quality inserts further up the performance of the tyres that come marked for easy identification and cool looks. The tyre are sold in sets of four and they are HPI Challenge legal from now on.

View the 36A tyres here

May 11, 2018

2018 Shizuoka Hobby Show – O.S. Engines

During this week’s 2018 Shizuoka Hobby Show in Japan O.S. Engines are presenting their new O.S. Speed branded sensored brushless motors and speed controller. The sensored competition motors are housed in a nicely machined 2-tone aluminium can with large cooling openings, heavy duty solder tabs and all-aluminium timing end cap. It is understood that the motors will become available in all popular modified and stock windings. Over to the O.S. Speed brushless speed controller, the device comes in an all-black design with a machined alloy case as well as black power, capacitor and receiver wires for a stealthy factory look. An external programming box allows to fine-tune the speed’s software and a large fan keeps the operation temperatures down. On the nitro side of things the iconic Japanese manufacturer shows off its new 4-shoe nitro off-road clutch that is tuneable with a total of three different hardness springs and two alloy clutch shoe types.

View the other new items here

May 11, 2018

Jeff Hamon wins at NSW State Championships

The 2018 NSW State Championships were hosted by the NSWRCRCC club at the John Grant International Raceway last weekend and while Andrew Bardetta took the title in the 1/10th 200mm Nitro Touring class it was Mugen’s Jeff Hamon with the win in 1/8th IC Track. Shepherd racer, Ric Bartolozzi came in 2nd behind Jeff as Dan Kradolfer (Mugen) rounded out the podium result in 3rd.

Source: Mugen [mugenseiki.com]

May 11, 2018

ECX Ruckus MT & SCT V4 RTR trucks

Coming soon from Horizon Hobby are the new ECX Ruckus V4 MT and SCT 1/10th scale 4WD ready-to-run trucks. The factory-assembled trucks feature permanent 4WD, full ball bearings, long-travel suspension components with fluid-filled shock absorbers as well as a quick release battery system, a high-torque 13T motor and Dynamite electronics. The latest generation also comes with new body shell designs and throttle limiter switch to ensure even entry level drivers can handle the vehicles with ease. Not included in the latest V4 generation are the needed NiMH battery and a suitable charger.

View more images here

May 11, 2018

LRP Master Italy – Announcement

The CAR Genova ASD club will play host to the LRP Master Italy race on the 2nd and 3rd of June. The race is divided into to days with Saturday being devoted to practice and the LRP Blast Truck evening race while Sunday will qualifying and the finals. Classes run are Touring 13.5T EFRA, Touring 13.5T LRP fix timing, 21.5T Formula and LRP Blast truck. For more information feel free to email the CAR Genova ASD club at info@cargenova.it.