Red RC

May 19, 2018

Pro-Line Pro-MT 4×4 alloy & steel upgrades

Coming from Pro-Line and made for the Pro-MT 4×4 monster truck are three new heavy duty aluminium and steel upgrades. First up is a set of aluminium shock caps that add strength, durability and style to a very important part of the truck. The caps are made from CNC machined aluminium and come gunmetal anodised to perfectly match the rest of the truck and have large laser engraved P-L logos on the front and back of the caps. The shock caps come in a pack of two with new inner diaphragms and they are a direct stock replacement upgrade.

Continue reading here

May 18, 2018

Aerox Razor 1/10th 190mm touring car body shell

Schumacher Racing have introduced the new Aerox Razor high performance 190mm touring car body shell. Developed in cooperation with a leading Formula 1 aerodynamicist the body offers exceptional aerodynamic efficiency with the maximised double front splitter creating a pressure differential that provides front aerodynamic grip. An uniquely adjustable curved rear wing helps to adjust downforce, balance and drag while the upturned leading edge on the wing allows airflow to remain attached, improving its efficiency for more downforce and less drag. The maximised length of the body improves two aspects; firstly more surface area for developing load and thus downforce and reducing lift, and secondly drag reduction, as the air passing over the body has to work less hard, deviating at a lower angle than normal, reducing drag and increasing speed. The BRCA and ROAR approved lightweight body is supplied clear and it includes a wing and mounting hardware, overspray film, a lights and decal set as well as an instruction sheet.

Source: Schumacher [racing-cars.com]

May 18, 2018

Pro-Line X-Maxx Trencher 4.3” Pro-Loc tyre

Made for the Traxxas X-Maxx 1/8th scale monster truck is Pro-Line’s new Trencher 4.3” Pro-Loc all-terrain tyre. The Trencher 4.3” is wider and taller than the popular Badlands 4.3” for more aggressive looks and performance and it comes in a super soft compound for exceptional grip on loose or hard-packed dirt, sand, snow, grass or gravel. The tyre features Pro-Line’s proprietary Pro-Loc technology that creates an ultra-secure bond to Pro-Line’s Impulse Pro-Loc X-Maxx wheels while still being removable when required. The reinforced tyre bead fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. The tyre comes as part including foam inserts.

Source: Pro-Line [prolineracing.com]

May 18, 2018

VP-Pro MBX8 pre-drilled rear wing

VP-Pro have introduced their new composite rear wing for the Mugen MBX8 buggy. The adjustable wing features an optional wickerbill to adjust the overall downforce and drag generated and it comes pre-drilled to make it a direct fit on Mugen’s latest 1/8th buggy. The side dams measure 98x59mm, allowing to attach 40x50mm race numbers at sanctioned events. The wing is available in black, yellow and white colour from now on.

View another image here

May 18, 2018

Arrowmax Honeycomb black/golden bearing meter

A new addition to Arrowmax’s Honeycomb line of tools is their new black and golden bearing meter. Designed to measure the inner diameter of metric ball bearings from 2mm up to 15mm, the tool also comes in handy when checking the condition of ball races or re-lubing them after cleaning. The tool tips comes anodised in a golden colour and laser-etched with white markings while the Honeycomb-design tool grip features a black and golden surface treatment.

Source: Arrowmax [arrowmax-rc.com]

May 18, 2018

Mugen MBX8 1-piece engine mount

Mugen have introduced a new 1-piece aluminium motor mount for the MBX8 nitro buggy. The item is machined from high-quality aluminium and it comes with a grey surface finish for wear and looks. Using the 1-piece mount over the original multi-piece part will improve crankcase support for improved engine and ball bearings durability while also increasing chassis strength and reducing torsional flex. The mount is a direct fit and it will hit stores from end of May.

Source: Mugen [mugenseiki.com]

May 18, 2018

Capricorn extra hard ball cups

Italian company Capricorn has announced the release of new extra hard ball cups for their range of cars. Available in three sizes the cups are moulded from a new, extra hard composite material for greater precision, free movement and more consistency when running in high ambient temperatures.

View the other ball cups here

May 18, 2018

Mugen MTC-1 floating battery mount

Coming from Mugen and made for the MTC-1 electric touring car is an anti-tweak quick-release battery mount. The multi-piece battery location system is constructed from machined aluminium and carbon fibre, and it does away with the need to hold down the battery using fibre reinforced tape. As the battery can slightly “float”, the chassis can’t be tweaked as it can occur when strapping the battery using tape. Adjustable front and rear stops allow to shift the LiPo pack forth and back for a certain amount in order to fine-tune the weight distribution or to adapt the mount to different battery case sizes. The battery mount set comes including mounting hardware and a shim set to adapt the mounts for standard and low-profile batteries.

View more images here